Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 29 for “"types of lasers"”.

  1. The use of lasers in treatment of cancerous lesions in the mouth

    The goal of this study was to explore the use of lasers in the treatment of oral leukoplakia, and to compare the recurrence and malignant transformation rates of laser treated oral leukoplakia to those treated by traditional surgical methods. Data used in this study was obtained via a search of …

    bu Repository record for The use of lasers in treatment of cancerous lesions in the mouth (opens in a new tab)

  2. Super-radiant free electron laser measurement and detection

    A free electron laser (FEL) is a type of laser that use relativistic electron bunches and a periodic magnetic field to generate coherent radiation. These types of lasers are of interest to the Navy because they can operate at the high average power with excellent optical beam quality that is needed …

    nps Repository record for Super-radiant free electron laser measurement and detection (opens in a new tab)

  3. Liquid Transmission Line Pulser Circuit for Laser Excitation

    The subject of this thesis is the study of liquid dielectric transmission lines and their potential application as an excitation source in high speed, high-repetition rate laser designs. The design problems associated with the construction of high repetition rate (khz), short wavelength lasers have …

    portland-state Repository record for Liquid Transmission Line Pulser Circuit for Laser Excitation (opens in a new tab)

  4. Experimental evaluation of characteristic temperature with varying duty cycles in 2μm vertical cavity surface emitting lasers due to external optical pumping

    [ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT AUTHOR'S REQUEST.] Vertical cavity surface emitting lasers (VCSELs) are of interest due to their small size, low cost, tunability, and excellent beam quality. Moreover, the near infrared is one of the most interesting regions in the …

    missouri Repository record for Experimental evaluation of characteristic temperature with varying duty cycles in 2μm vertical cavity surface emitting lasers due to external optical pumping (opens in a new tab)

  5. Skirtingi lazeriai laringologijoje ir jų pritaikymas (CO2 lazeris, Blue lazeris, diodinis lazeris) /

    … in laryngology, particularly in the management of benign and malignant laryngeal pathologies. Each type of laser possesses distinct advantages that render it more appropriate for specific clinical scenarios. The CO₂ laser remains the gold standard, especially in transoral laser microsurgery …

    vilnius Repository record for Skirtingi lazeriai laringologijoje ir jų pritaikymas (CO2 lazeris, Blue lazeris, diodinis lazeris) / (opens in a new tab)

  6. Micro- and nano-cavity lasers for sensing applications

    Lasers can be used for a multitude of sensing applications. This dissertation discusses two types of lasers for sensing applications. The use of an integrated vertical-cavity surface-emitting laser and photodetector as a position sensor is first detailed. Design, fabrication, and simulation of the …

    uiuc Repository record for Micro- and nano-cavity lasers for sensing applications (opens in a new tab)

  7. Correcting for spherical aberration in multiphoton microscopy using a two-dimensional spatial light modulator

    … past few decades, there has been an explosion of construction techniques for microscopy systems. These systems can include various types of lasers, including solid state and more recently, fiber lasers. There are many advantages to a fiber laser, including portability, small size, ease of …

    colo-mines Repository record for Correcting for spherical aberration in multiphoton microscopy using a two-dimensional spatial light modulator (opens in a new tab)

  8. Skaidrių medžiagų paviršiaus abliacija naudojant 1-3,5 um femtosekundinius impulsus /

    In recent years, the use of femtosecond pulse lasers for material processing has been extensively studied both theoretically and experimentally. The interest in material processing with femtosecond lasers is related to the advantages compared to long-pulse lasers (~ns). Ultra-short (on the order of …

    vilnius Repository record for Skaidrių medžiagų paviršiaus abliacija naudojant 1-3,5 um femtosekundinius impulsus / (opens in a new tab)

  9. Characterization and Design of Liquid Crystal Polymer (LCP) Based Multilayer RF Components and Packages

    … discusses the investigation and utilization of a new promising thin-film material, liquid crystal polymer (LCP), for microwave and millimeter-wave (mm-wave [>30 GHz]) components and packages. The contribution of this research is in the determination of LCP's electrical and mechanical …

    gatech Repository record for Characterization and Design of Liquid Crystal Polymer (LCP) Based Multilayer RF Components and Packages (opens in a new tab)

  10. Research Towards the Development of an Optically Pumped Cesium Dimer Laser

    Metal vapor lasers are a promising candidate for high power laser systems and have been a recent area of interest. These types of lasers seem to combine all the strengths of both gas/chemical and solid state lasers without the weaknesses attributed to them. Metal vapor lasers have very efficient …

    unm Repository record for Research Towards the Development of an Optically Pumped Cesium Dimer Laser (opens in a new tab)

  11. High power high efficiency electron-hole and unipolar quantum dot lasers

    The goal of this research work is to develop and analyze Quantum Dot (QD) lasers aimed at improving high power performance which is crucial for numerous scientific, military and industrial applications. Fundamentally two dissimilar types of lasers are investigated: namely bipolar electron-hole …

    texas Repository record for High power high efficiency electron-hole and unipolar quantum dot lasers (opens in a new tab)

  12. Oftalmologinių lazerių pagrindinių parametrų charakterizavimo ir optimizavimo tyrimas /

    It is widely known that lasers are becoming increasingly important these days. Now there are a variety of different types of lasers, and they are used in industry, in the military sphere and in medicine. One of the most popular spheres of medicine, where lasers are used for – ophthalmology. In this …

    vilnius Repository record for Oftalmologinių lazerių pagrindinių parametrų charakterizavimo ir optimizavimo tyrimas / (opens in a new tab)

  13. In-band pumped conical refraction lasers based on the Nd:KGd(WO4)2 crystal

    The laser has been used in many areas of science and technology. At the same time there are different types of lasers and conical refraction (CR) laser is one of them. Recently, there has been a strong interest in conical refraction lasers and their applications. CR lasers have the potential …

    manitoba Repository record for In-band pumped conical refraction lasers based on the Nd:KGd(WO4)2 crystal (opens in a new tab)

  14. Enhancement of Cortical Bone Ablation Using Ultrafast Pulsed Lasers

    … and may cause heat damage. Ultrashort pulse lasers are a promising replacement, but their ablation efficiency must be improved. The goal of this thesis was to achieve high ablation efficiency, precision, and minimal collateral damage using an ultrafast laser on bovine hard tissue. This work …

    mcmaster Repository record for Enhancement of Cortical Bone Ablation Using Ultrafast Pulsed Lasers (opens in a new tab)

  15. Backside-integrated III-V-on-Silicon Lasers and Modulators

    … bonding has emerged as a viable way to integrate lasers with Si photonic circuits at the wafer-scale. However, hybrid III-V-on-Si integration is often plagued by high thermal impedance and difficulty in co-integration with other materials. In this thesis, we design and demonstrate the first active …

    toronto-retro Repository record for Backside-integrated III-V-on-Silicon Lasers and Modulators (opens in a new tab)

  16. The utilization of lasers in the management of periodontitis

    The goal of this thesis is to discuss the role of various types of lasers available in dentistry, and their use in treating periodontal disease. While there are numerous clinical uses that can be employed as adjuncts, this discussion focuses specifically on the use of lasers in periodontics. The …

    bu Repository record for The utilization of lasers in the management of periodontitis (opens in a new tab)

  17. Graphene Nanoparticle-Polymer Composite Fabricated by Pulsed Laser Ablation in Liquid

    … deposition (CVD), micromechanical exfoliation of graphite, and reduction of graphene oxide. Each of these methods has its advantages and disadvantages. This thesis investigates a novel and clean approach to grow graphene directly from bulk graphite by Pulsed Laser Ablation in Liquid, whereas …

    waterloo Repository record for Graphene Nanoparticle-Polymer Composite Fabricated by Pulsed Laser Ablation in Liquid (opens in a new tab)

  18. Spectral Properties of Phase Noises and the Impact on the Performance of Optical Interconnects

    The non-ending growth of data traffic resulting from the continuing emergence of Internet applications with high data-rate demands sets huge capacity requirements on optical interconnects and transport networks. This requires the adoption of optical communication technologies that can make the best …

    ku Repository record for Spectral Properties of Phase Noises and the Impact on the Performance of Optical Interconnects (opens in a new tab)

  19. Development of All-Fiber Format Laser Sources for Nonlinear Microscopy and Spectroscopy

    … imaging and probing chemical information. Many types of lasers have been demonstrated for their application in multiphoton microscopy and coherent Raman spectroscopy/microscopy. Traditionally, solid-state lasers are the dominant light sources for such experiments. Compared to the solid-state …

    arizona-thes Repository record for Development of All-Fiber Format Laser Sources for Nonlinear Microscopy and Spectroscopy (opens in a new tab)

  20. Novel Cavities in Vertical External Cavity Surface Emitting Lasers for Emission In Broad Spectral Region by Means Of Nonlinear Frequency Conversion

    … vertical external cavity surface emitting lasers (VECSEL) were first demonstrated in the mid 1990's. Due to the unique design properties of extended cavity lasers VECSELs have been able to provide tunable, high-output powers while maintaining excellent beam quality. These features offer a …

    arizona-thes Repository record for Novel Cavities in Vertical External Cavity Surface Emitting Lasers for Emission In Broad Spectral Region by Means Of Nonlinear Frequency Conversion (opens in a new tab)

Page 1 of 2