Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 147 for “"tyres"”.
-
A joint model of heavy truck, tyres, and operating environment for tyres selection
… selection of all vehicle components, including tyres. Volvo Group Trucks Technology (GTT) and Chalmers University of Technology run a common research project TyreOpt—Fuel consumption reduction by tyre drag optimization. This master thesis is supporting the TyreOpt research project by …
-
Finite element analysis of aircraft tyres
… the Finite Element (FE) Analysis of aircraft tyres is presented. The modelling and simulations of detailed construction of tyre enable tyre manufacturers to evaluate new designs and development before a prototype is fabricated, and aim to reduce the research costs and efforts to optimise the …
-
Fuels from tyres by pyrolysis in molten salts
The current annual arisings of used car/van tyres in the U.K. has been found to be around 25m (188,000 tonnes). After the established reuse industries have taken their requirements this leaves 13.5m (102,000 tonnes) waste tyres; a quantity that can no longer be satisfactorily tipped. Laboratory …
-
Wave propagation in tyres and the resultant noise radiation
<p>Tyre noise has become an increasingly important road traffic noise source. This is because other sources on the vehicle, such as the air intake system, the exhaust system and the engine, have tended to become relatively quieter. This situation forces the tyre noise component to be reduced in …
-
A study of arching effect in soils incorporating receycled tyres
… the beneficial engineering properties of waste tyres such as their light weight as backfilling material and secondly to mitigate their environmental impact. However, to the author’s knowledge, no previous study of the arching effect in rubber-soil mixtures have been reported in literature at the …
-
Product development methodologies for self-powered sensor-nodes in vehicle tyres
In this work the study of new product development methodologies is applied to modelling and simulation of several components of a tyre sensor node. The purpose of the sensor node is to improve the active safety of the vehicle making additional information, with respect to traditional TPMS, …
-
Design of a quencher for gases from pyrolysis of used tyres
… for cooling of hot gases from pyrolysis of used tyres. This thesis evaluates the heat transfer mechanisms and operational parameters affecting the design of this particular quencher. By deriving two different theoretical models describing the heat transfer between sprayed oil droplets and hot …
-
Steel fibres from waste tyres to concrete : testing, modelling and design.
The disposal of waste tyres and steel fibres from tyres is a serious worldwide environmental problem. This thesis examines the use of steel fibres extracted from waste tyres as reinforcement for concrete. Previous attempts to use such fibres with concrete ended up in balling of the fibres and …
-
Investigation of nonlinear contact problem in pneumatic tyres interacting with road surface
… a high performance engine, aerodynamic body, and tyres. Among these three important factors the tyre is the only component which can transmit the vehicle force to the road, and is the most difficult part to tune, since it involves complex phenomena and a wide range of operating conditions. …
-
A study of the exploitation of the properties of natural rubber in tyres
Tyres account for over 60 per cent of the world's total rubber usage. The distribution of rubbers used in tyres between natural and synthetic rubber varies from country to country. The trends in tyre development are indicated. The properties of natural rubber and the main synthetic rubbers used in …
-
A Virtual Test Platform for Analyses of Rolling Tyres on Rigid and Deformable Terrains
… arising from interactions between the pneumatic tyres and the terrains. Reliable models are thus needed to estimate these forces/moments to be used in vehicle simulations for design and developments. The empirical and semi-empirical tyre models developed for vehicle dynamics simulations …
-
Reactions of waste rubber tyres and polypropylene plastics with gases and electric arc furnace steelmaking slags
Steelmaking using an Electric Arc Furnace (EAF) has gained more interest in recent years, due to the low capital and operating cost; and its flexibility in the use of raw materials (i.e. scrap). Depending on the cost and availability, anthracite and metallurgical coke are among the conventionally …
-
Influence of inflation pressure, speed, load and warm-up phase on rolling resistance of passenger car tyres
… a significant impact on the energy efficiency of tyres. This impact is especially pronounced for short distance travel during which the tyre does not completely warm up. This thesis work investigated the influence of variation in the inflation pressure, speed and load on the rolling resistance and …
-
REUSING WASTE MATERIALS AS CONCRETE CONSTITUENTS FOR SINGAPORE'S HIGH-RISE DEVELOPMENTS : A STUDY OF SCRAP TYRES AND RECYCLED PLASTICS
Concrete has been well used all over the world for the construction of buildings. By looking at volume alone, concrete is considered the world’s most important construction material. It is the second material mostly used in the construction industry. It is also common to see high rise developments …
-
The Co-Construction of Properties in a Machinic-Complex: A study of the Car and Dunlop Pneumatic Tyres 1900-1925
… examines the development of Dunlop pneumatic tyres and the car 1900- 1925. It explores the transformation of these artefacts from 'unreliable', 'crafted' luxuries, to 'reliable', 'scientific' products for a middle class market through a process of co-construction. It argues that through the …
-
Racionalios atliekų tvarkymo sistemos vadybiniai aspektai /
… Growing number of vehicles the amount of used tyres are growing too. 12 000 – 14 000 tones waste tyres are generated each year in Lithuania, about 3 000 tones are collected, it is about 21% of generated amount. Year by year the used tyres problem is getting more significant. There was done …
Page 1 of 8