Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"ultimate failure load"”.

  1. Biomechanical analysis of a novel suture pattern for repair of equine tendon lacerations

    … can lead to significant gap formation, construct failure, longer healing time and poor quality of the healed tendon. Similar to equine surgery, gap formation and construct failure are common concerns in human medicine, with early return to post-operative physiotherapy challenging the primary …

    vt Repository record for Biomechanical analysis of a novel suture pattern for repair of equine tendon lacerations (opens in a new tab)

  2. Ultimate Strength Prediction in Fiberglass/Epoxy Beams Subjected to Three-Point Bending Using Acoustic Emission and Neural Networks

    … demonstrates the feasibility of predicting ultimate strengths in composite beams subjected to 3-point bending using a neural network analysis of acoustic emission (AE) amplitude distribution data. Fifteen unidirectional fiberglass/epoxy beams were loaded to failure in a 3-point bend test …

    embry-riddle Repository record for Ultimate Strength Prediction in Fiberglass/Epoxy Beams Subjected to Three-Point Bending Using Acoustic Emission and Neural Networks (opens in a new tab)

  3. Progressive failure analysis of composite laminates using non-linear and stochastic FEA

    … finite element formulation. For the stochastic failure analysis, a stochastic finite element methodology based on the Monte Carlo Simulation is used. For the case of uni-axial compression and bi-axial compression, the tensor polynomial form of the maximum stress criterion is used to predict the …

    concordia Download PDF for Progressive failure analysis of composite laminates using non-linear and stochastic FEA (opens in a new tab)

  4. Ultimate Compression After Impact Load Prediction in Graphite/Epoxy Coupons Using Neural Network and Multivariate Statistical Analyses

    … of this research was to accurately predict the ultimate compressive load of impact damaged graphite/epoxy coupons using a Kohonen self-organizing map (SOM) neural network and multivariate statistical regression analysis (MSRA). An optimized use of these data treatment tools allowed the …

    embry-riddle Repository record for Ultimate Compression After Impact Load Prediction in Graphite/Epoxy Coupons Using Neural Network and Multivariate Statistical Analyses (opens in a new tab)

  5. Characterization of new particulate MMC materials and bolted joints through applicable ASTM standards

    … with added properties like high stiffness, high ultimate strength and hardness.;In this study we deal with PRMMC manufactured by a novel technology involving the pressure less infiltration of aluminum into a mass of ceramic reinforcement particles. Basic tests like tension test, three point …

    wvu Repository record for Characterization of new particulate MMC materials and bolted joints through applicable ASTM standards (opens in a new tab)

  6. A biomechanical study of lateral ankle sprain

    … was identified to significantly influence the failure load of ligaments demonstrating the importance of mechanically characterising ligaments at appropriate rates of loading. Characterising the lateral ankle ligaments determined that the ultimate failure load and stiffness of the lateral ankle …

    whiterose Download PDF for A biomechanical study of lateral ankle sprain (opens in a new tab)

  7. An experimental investigation of the ultimate capacity of single plate connections

    … connection problems for example eccentrically loaded bolted and welded connections. Generally, for a welded connection attached to a rigid support the strength of the weld is considered critical. However, it has to be recognized that the base metal in the vicinity of the weld may become locally …

    ubc Repository record for An experimental investigation of the ultimate capacity of single plate connections (opens in a new tab) Download PDF for An experimental investigation of the ultimate capacity of single plate connections (opens in a new tab)

  8. Understanding the Behaviour of GFRP Reinforced Concrete Members under Changing Climate Trends

    … situations such as sudden fire sustained the load for about 50 minutes. In the second phase, bond behaviour was studied with pullout as well as beam bond specimens which were conditioned at 50oC and 80oC for four months under a relative humidity of 60%. It was found that the studied thermal …

    toronto-retro Repository record for Understanding the Behaviour of GFRP Reinforced Concrete Members under Changing Climate Trends (opens in a new tab)

  9. Creep rupture and life prediction of polymer composites

    … and structures exposed under service conditions (load, time, temperature, water, and others) must be established. Creep response under sustained load results in rupture but the time to rupture depends on environmental conditions. Creep rupture tests at higher fractions of ultimate failure load are …

    wvu Repository record for Creep rupture and life prediction of polymer composites (opens in a new tab)

  10. Progressive failure and post-buckling response of tapered composite plates

    … These in turn cause changes in the response and failure strengths of the laminate. For achieving economical, safe and reliable design, the progressive failure and post-buckling response of tapered laminated plates are important design considerations. Therefore, there is a necessity to investigate …

    concordia Download PDF for Progressive failure and post-buckling response of tapered composite plates (opens in a new tab)

  11. Experimental Investigations of Residual Strength and Repaired Strength of Corrosion Damaged Prestressed Bridge Beams

    … of five full-scale bridge members were tested to failure throughout this stage. All beams were subjected to monotonically increasing loads until failure. For beams repaired with external PT, the experimental test was accompanied by a detailed approach for determining the ultimate failure load, the …

    vt Repository record for Experimental Investigations of Residual Strength and Repaired Strength of Corrosion Damaged Prestressed Bridge Beams (opens in a new tab)

  12. An investigation into the punching shear failure in R.C. waffle slabs subjected to concentrated load

    … more vulnerable when subjected to concentrated loads. The punching shear failure inside waffle slabs has not been thoroughly investigated and this is also reflected in the current code of practice, which, in the main, relates the design of punching shear in waffle slabs to that in solid slabs. …

    abertay Repository record for An investigation into the punching shear failure in R.C. waffle slabs subjected to concentrated load (opens in a new tab) Download PDF for An investigation into the punching shear failure in R.C. waffle slabs subjected to concentrated load (opens in a new tab)

  13. Optimal Parameters for Doubly Curved Sandwich Shells, Composite Laminates, and Atmospheric Plasma Spray Process

    … stress recovery scheme (SRS) and the Tsai-Wu failure criterion to find the stacking sequence of composite laminates and the topology and materials for doubly curved sandwich shells to maximize the first failure load. It is followed by the progressive failure analysis to determine the ultimate …

    vt Repository record for Optimal Parameters for Doubly Curved Sandwich Shells, Composite Laminates, and Atmospheric Plasma Spray Process (opens in a new tab)

  14. Αποκατάσταση χρόνιων και μεγάλων ρήξεων του στροφικού πετάλου με τενόντιο ενδοϋμενικό αυτομόσχευμα: πειραματική μελέτη σε κονίκλους

    … showed a statistically significant increase in ultimate failure load compared to the defect group (p < 0.05). In addition, the graft group at 12 weeks showed comparable stiffness to that of the control group. Computed tomography analysis showed no significant progression of fatty infiltration in …

    greece Repository record for Αποκατάσταση χρόνιων και μεγάλων ρήξεων του στροφικού πετάλου με τενόντιο ενδοϋμενικό αυτομόσχευμα: πειραματική μελέτη σε κονίκλους (opens in a new tab)

  15. Predicting Distal Radius Failure Load during a Fall using Mechanical Testing and Peripheral Quantitative Computed Tomography

    … estimate distal radius strength (resistance to failure) via bone strength indices such as BSIc (related to compressive axial loading resistance). BSIc has been validated in experimental compressive testing. However, during a fall, the distal radius is subjected to a combination of …

    sask Repository record for Predicting Distal Radius Failure Load during a Fall using Mechanical Testing and Peripheral Quantitative Computed Tomography (opens in a new tab)

  16. Impact Behaviour of Reinforced Concrete Beams Strengthened or Repaired with Carbon Fibre Reinforced Polymer (CFRP)

    … structural members. CFRP can restore the load- carrying capacity of damaged structural members to make them serviceable. The effect of using CFRP to repair the damaged beams has not been not properly addressed in the literature. This research has the aim of providing a better understanding …

    plymouth Repository record for Impact Behaviour of Reinforced Concrete Beams Strengthened or Repaired with Carbon Fibre Reinforced Polymer (CFRP) (opens in a new tab)

  17. Optimum First Failure Loads of Sandwich Plates/Shells and Vibrations of Incompressible Material Plates

    … face sheets for it to have the maximum first failure load under quasistatic (blast) loads. The analyses employ a third-order shear and normal deformable plate/shell theory (TSNDT), the finite element method (FEM), a stress recovery scheme (SRS), the Tsai-Wu failure criterion and the Nest-Site …

    vt Repository record for Optimum First Failure Loads of Sandwich Plates/Shells and Vibrations of Incompressible Material Plates (opens in a new tab)