Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 68 for “"uniaxial loading"”.

  1. Quantitative Comparison: Equine Genital Tissues Under Uniaxial Loading

    … male and female equine genital tissues through uniaxial tensile testing, with strain measurements obtained via digital image correlation. Dog-bone-shaped tissue specimens were excised from mares and geldings (n=23 from female tissues and n=42 from male tissues) with all specimens aligned along …

    vt Repository record for Quantitative Comparison: Equine Genital Tissues Under Uniaxial Loading (opens in a new tab)

  2. Buckling of a composite nonlinearly elastic plate under uniaxial loading

    Thesis (Ph. D.)--Michigan State University. Department of Metallurgy, Mechanics and Materials Science, 1990

    msu Repository record for Buckling of a composite nonlinearly elastic plate under uniaxial loading (opens in a new tab)

  3. Numerical simulation and experimental verification of the mechanical behavior of nanocrystalline materials under nanoindentation and compression uniaxial loading

    … containing extensive porosity under compression loading. In the third simulation level, a nanoindentation model has been developed. The FE model, in conjunction with a reverse data analysis, allows to create the material’s stress-strain curve on the base of the results of the nanoindentation …

    greece Repository record for Numerical simulation and experimental verification of the mechanical behavior of nanocrystalline materials under nanoindentation and compression uniaxial loading (opens in a new tab)

  4. Peridynamic Modeling of Hyperelastic Materials

    … type membrane under equibiaxial, planar and uniaxial loading conditions. The material parameters for each loading case are determined by equating the peridynamic strain energy to those of the classical continuum mechanics. Therefore, the peridynamic equations of motion are derived based on …

    arizona-thes Repository record for Peridynamic Modeling of Hyperelastic Materials (opens in a new tab)

  5. The effect of mean stresses on short fatigue crack growth behaviour.

    … profile were tested under torsional and uniaxial loading with various alternating and mean stress levels. Crack propagation was monitored by means of a surface replication technique applied periodically during the tests. Several results have been obtained. Satisfactory predictions of the …

    whiterose Download PDF for The effect of mean stresses on short fatigue crack growth behaviour. (opens in a new tab)

  6. Modeling the Behavior of Type 304 Stainless Steel With a Unified Creep-Plasticity Theory

    … and evaluated for type 304 stainless steel under uniaxial loading and isothermal conditions. The model is also modified so that nonisothermal behavior can be simulated. Predictions of the behavior of a two-bar structure under thermal shock loading are compared with experimental results.

    uiuc Repository record for Modeling the Behavior of Type 304 Stainless Steel With a Unified Creep-Plasticity Theory (opens in a new tab)

  7. Observations of Ferroelastic Switching by Raman Spectroscopy

    … were either exposed to indentation damage or uniaxial loading. In both of these cases maps of the ceramic surface were taken using Raman spectroscopy following loading and the relative intensities of the tetragonal peaks were analyzed. The resulting intensity profiles were used to monitor the …

    tamu Repository record for Observations of Ferroelastic Switching by Raman Spectroscopy (opens in a new tab)

  8. Softening response of concrete in direct tension

    … softening response of concrete under direct uniaxial loading. But due to the brittleness of the material previous researchers have encountered great difficulty in obtaining complete data regarding the load-deformation behavior. This study uses a strain-controlled testing method and therefore …

    njit Repository record for Softening response of concrete in direct tension (opens in a new tab)

  9. The Changes in The Compressive and Tensile Yield Strengths During Uniaxial Cyclic Loading

    … measure. A unified creep-plasticity theory for uniaxial loading which uses the yield strengths in tension, Y(,1), and compression, Y(,2), as the state variables is investigated as the means of improving the formulation of such theories. The yield strengths are easily measured and can be readily …

    uiuc Repository record for The Changes in The Compressive and Tensile Yield Strengths During Uniaxial Cyclic Loading (opens in a new tab)

  10. Statistical Analysis of HCP Polycrystals Using Crystal Plasticity Modeling and Simulation

    … of a polycrystalline Mg microstructure under uniaxial loading, particularly along principal directions of a rolled material - rolling (L), in-plane transverse to rolling (T), and out-of-plane transverse (S) to L and T. Starting with an initial rolled texture of an Mg alloy as a basis, the …

    houston Repository record for Statistical Analysis of HCP Polycrystals Using Crystal Plasticity Modeling and Simulation (opens in a new tab)

  11. Constitutive relationship of plain concrete under uniaxial load

    … to modelling of concrete behaviour under rapid uniaxial loading. Three creep models were chosen for simulating the behavior of concrete under various rates of rapid loading. Two traditional creep calculation strategies and a new method developed especially for the B3 model was used. As a key …

    nus Repository record for Constitutive relationship of plain concrete under uniaxial load (opens in a new tab) Download file for Constitutive relationship of plain concrete under uniaxial load (opens in a new tab)

  12. Analysis of nonlinear beam-columns

    … beam-column. 3. Inelastic bar under cyclic, uniaxial loading. The solutions provided by the inelastic model were compared to those produced by already existing beam-column models. The model provides reliable solutions to elastic and inelastic beam-columns, Specifically, it is useful for …

    vt Repository record for Analysis of nonlinear beam-columns (opens in a new tab)

  13. INTERNAL LOAD TRANSFER IN METAL MATRIX COMPOSITES REVEALED BY IN-SITU SYNCHROTRON X-RAY DIFFRACTION

    … synchrotron X-ray diffraction combined with uniaxial loading to probe the response of the matrix and the reinforcement phases in cold-sprayed Ni-CrC composites. Specifically, we resolve the load transfer from the metallic matrix to the ceramic reinforcement upon loading. We discuss …

    cornell Repository record for INTERNAL LOAD TRANSFER IN METAL MATRIX COMPOSITES REVEALED BY IN-SITU SYNCHROTRON X-RAY DIFFRACTION (opens in a new tab)

  14. The behaviour and design of thin walled concrete filled steel box columns

    … The columns are investigated under axial, uniaxial and biaxial loading. The currently available international standards for composite structures are limited to the design of concrete filled steel columns with compact sections and yield stress of steel up to 460 N/mm2. This thesis consists …

    unsw Repository record for The behaviour and design of thin walled concrete filled steel box columns (opens in a new tab)

  15. Creating an Accurate Microstructurally based RVE of Various Tailor Hot Stamped Material Conditions

    … was introduced to meet these needs. The uniaxial damage behavior of three novel hot stamped tailored material conditions (TMC) was examined at the meso-scale. The grain structure, morphology and distribution are quantified for each TMC using field emission scanning electron microscopy. An …

    guelph Repository record for Creating an Accurate Microstructurally based RVE of Various Tailor Hot Stamped Material Conditions (opens in a new tab)

  16. Effects of Prestrain on the Strain Rate Sensitivity of AA5754 Sheet

    … between the prestrain stage and subsequent uniaxial loading, it has the effect of reducing the rate sensitivity of the material as well as reducing the overall flow stress. A rate-sensitive adaptation of the Voce material model was successfully implemented in LS-DYNA and used to predict the …

    queens Repository record for Effects of Prestrain on the Strain Rate Sensitivity of AA5754 Sheet (opens in a new tab)

  17. Lattice Strain Development in Inconel-690 under Bi-axial Compression and Tension

    … a model of INC690’s behaviour under Constrained loading conditions in compression and tension. An Elasto-Plastic Self-Consistent (EPSC) model was used to predict the lattice stresses and strains resulting from Constrained loading in INC690 for four crystallographic planes. The internal strain …

    queens Repository record for Lattice Strain Development in Inconel-690 under Bi-axial Compression and Tension (opens in a new tab)

  18. Finite element modeling of two-dimensional woven materials using mechanically equivalent continua

    … the interaction between yarns is ignored.</p> <p>Uniaxial loading and pure shear loading are examined in Chapter 5. Symmetric biaxial loading case is examined in Chapter 6. In both chapters, the results are confirmed through closed-form analysis. In Chapter 7, asymmetric loading case is explored. …

    ut-knoxville Repository record for Finite element modeling of two-dimensional woven materials using mechanically equivalent continua (opens in a new tab)

  19. Modelo tridimensional del tendón del músculo supraespinoso

    … complex where mechanically characterized under uniaxial loading. The data obtained was used to fed a computerized 3D lineal isotropic model made of medical images. Results: From the uniaxial test, stress-strain curves where obtained that were homogeneous for 20% of initial deformation. Young’s …

    rosario Repository record for Modelo tridimensional del tendón del músculo supraespinoso (opens in a new tab)

  20. Experimental characterization of self-heating at intermediate strain rates for elastomers and evaluation of thermoelastic hyperelastic constitutive model

    … of elastomers due to constant high strain rate loading is characterized by a comprehensive experimental method. The experimentally observed material behavior is later predicted by numerical simulation using a modified thermo-elastic hyperelastic material model. To achieve the research goals, two …

    wichita-thes Repository record for Experimental characterization of self-heating at intermediate strain rates for elastomers and evaluation of thermoelastic hyperelastic constitutive model (opens in a new tab)

Page 1 of 4