Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 28 for “"user-defined subroutine"”.
-
Analysis of advanced material models for complex industrial processes
… all models tested have been implemented in a user defined subroutine written in Fortran90 for LS-Dyna. Based on previous work, an explicit integration algorithm was chosen for the material models, shortcomings of this algorithm have also been discovered and documented in this work. For general …
-
Modeling of hydro-chemo-mechanical behavior of clay soils for prediction of landslide displacements
… equations which has been implemented in a user-defined subroutine (UEL) of the commercial code ABAQUS. This element has taken into account the 2D displacement of the soil skeleton, multidimensional flow of water, osmotic effect, advection and diffusion of salt. A new hyperelastic law is …
-
Elastic-Damaging Plasticity Model for Ductile Fracture
… proposed model is implemented in ABAQUS using a user-defined subroutine, i.e. UMAT. Applications to four-point plane strain bending specimens with a key hole notch and to double-tee circular hollow section tubular joints are presented. The proposed model appears to be capable of simulating, with …
-
Progressive damage and failure of unidirectional fiber reinforced laminates under impact loading with composite properties derived from a micro-mechanics approach
… by implementing the material damage model as a user defined subroutine in the FE software ABAQUS. From strains supplied by ABAQUS the subroutine uses the free shear traction technique and values of material parameters of the constituents to find average stresses in a FE, and checks for Hashin's …
-
Viscoelastic Analysis of High Strain Composites for Deployable Structures in Space Applications
… equations and its implementation as a user-defined subroutine in finite element programs is then described. The subroutine allows relaxation of 3D thin-shell structures to be modeled, and is applied to simulate stowage and recovery of a thin-ply composite currently of interest for solar …
-
Mathematical modelling of the microstructural evolution during the hot rolling of AA5083 aluminum alloys
… the roll bite. The microstructure model is a "user-defined" subroutine within ABAQUS™ that uses semi-empirical equations from in the literature quantifying the microstructure (fraction recrystallised) changes that occur between the roll bite exit and the quench. The microstructure model uses …
-
Advanced numerical techniques to simulate soil-tool interface problems
… into the finite element method via an ABAQUS user defined subroutine UMAT. Then the implemented model was verified through analysis of some benchmark problems and results were compared with results from different classical failure criteria. The finite element analysis revealed the high …
-
Quantification of cooling channel heat transfer in low pressure die casting
… The algorithm was implemented in the form of a user-defined subroutine in a 3-D thermal model of the Low Pressure Die Casting (LPDC) process developed in the commercial finite element analysis package in ABAQUS. The cooling channel HTC’s are often input into thermal models as an average constant …
-
Unified Tertiary and Secondary Creep Modeling of Additively Manufactured Nickel-Based Superalloys
… process. A finite element (FE) model with a subroutine is created for simulating the creep mechanism for 3D printed nickel alloy 718 components. A continuum damage mechanics (CDM) approach is employed by implementing a user defined subroutine formulated to accurately capture the creep …
-
Friction and Wear at Elevated Velocities
… potentials. The proposed model is implemented as user defined subroutine VUMAT in ABAQUS Explicite to analyze the structural response of the high speed sliding experiment from the first part. This model provides a potential feature to relate the non-local continuum plasticity and damage of the …
-
Computational modelling of failure mechanisms in fibre metal laminates
… laws has been developed. In this model, a user-defined subroutine is developed in Fortran and linked with the Finite Element (FE) solver Abaqus/Explicit. Through this subroutine, physically verified theories are utilized for predicting the onset of damage in composites. A criterion for …
-
Optimal Blast-Resistant Sandwich Structures with Transversely Isotropic, Elasto-plastic Polymeric Foams as Cores
… The material model is implemented as a VUMAT (user defined) subroutine in the commercial finite element software ABAQUS Explicit. We show that the model works robustly in uniaxial deformations as well as in sandwich problems using the test data available in the literature. We provide values of …
-
Interpretation of the Behavior of Pile Foundations in Unsaturated Soils Subjected to Axial and Lateral Loading
… nonlinear response of pile groups implementing a user-defined subroutine into ABAQUS software. Good comparisons are found between the predictions from both the proposed analytical method and numerical analysis with the measurements. In addition, a comprehensive numerical technique is proposed for …
-
Mesoscale modeling of stress and strain evolution in electron beam powder bed fusion additive manufacturing (EB-PBF)
… changes from powder to liquid to solid. A user-defined subroutine was developed to correctly describe the evolution of thermal strain as the material solidifies and contracts. The mesoscale model developed in this work has been used to examine different scenarios. The effect of substrate …
-
Hierarchical Multiscale Modeling of Polymer and Mineral Interactions in Nanocomposite Applications
… the commercial software Abaqus/Explicit via a user-defined subroutine. The artificial neural network-based model was developed to enhance accuracy and to bridge the gap between atomistic simulations and continuum models. The material point method is employed to perform high-fidelity simulations …
-
The Determination Of The Concrete Tensile Creep At Early Age Using The Ring Test
… for a 5-layer concrete ring model through a user-defined subroutine. Concrete tensile creep was also calculated from the subroutine using the shrinkage induced stress. The predicted creep behavior was verified by comparing the steel strain obtained from the experiment with what was solved …
-
Durability Model of SOFC Anode Structure under Thermo-Mechanical and Fuel Gas Contaminants Effects
… implemented in finite element analysis through a user defined subroutine to predict anode long-term structural integrity. The model is exploited to predict the stress-strain relations of Ni-YSZ at temperatures and porosities which are difficult to generate experimentally. Accelerated exposure …
-
Simulation and prediction of machining conditions influences on part surface integrity and metallic particle emission using multi-physics modeling
… Hall-Petch (H-P) equations were combined in a user-defined subroutine (FORTRAN) to model dynamic recrystallization (DRX) and estimate grain size and microhardness. The results indicated that at higher cutting speeds and feed rates, grain refinement occurred more prominently in the adiabatic …
-
Quasi-Static and Creep Behavior of Enhanced SIC/SIC Ceramic Matrix Composites
… behavior. The model, which was input via a user defined subroutine into the ANSYS finite element program uses the concept of state or internal variables to define the unloading portion of the stress-strain curve. The results were compared with the test data and they show very good agreement. …
-
Numerically Based Seismic Fragility Curves for Suspended Ceiling Systems
… ceiling systems were derived numerically. A user-defined subroutine was incorporated in the Abaqus/Explicit software framework to capture the multi-directional pinched hysteretic behavior of the grid runner connections. The results of the large-scale shake table testing on suspended ceiling …
Page 1 of 2