Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 45 for “"using dynamic mechanical analysis"”.
-
Mechanical Properties of Kenaf Composites Using Dynamic Mechanical Analysis
… research kenaf/epoxy composites were analyzed using Dynamic Mechanical Analysis (DMA). A three-point bend apparatus was used in the DMA testing. The samples were tested at 1 hertz, at a displacement of 10 μm, and at room temperature. The fiber volume content of the kenaf was varied from 20%-40% …
-
On the characterisation of structural damping in wind turbine blade composite materials : an approach using dynamic mechanical analysis and experimental modal analysis
… however, their inherent anisotropic nature under dynamic loads leads to complex and poorly understood damping mechanisms. Despite the advantages of these materials, current experimental approaches have failed to capture the directional variations in damping behaviour. This has led to an …
-
Cellular Evolution in PEI: Mapping Bubble Dynamics through Solid-State CO_2 Foaming Processes
… components in satellites and aircraft cabins. By using dynamic mechanical analysis (DMA), a constitutive model for bubble growth under CO_2 saturation is developed, capturing glass transition effects and growth of nanofoam cells. Key properties such as cell growth rate, CO_2 concentration, …
-
MULTI-FUNCTIONAL NANOSTRUCTURED FILMS FROM CELLULOSE NANOFIBERS
… properties, such as biodegradability and high mechanical performance. However, their nano-/microscopric structure is not fully understood. In this thesis, we studied the structural features of CNF by using atomic force microscopy (AFM) and scanning electron microscopy (SEM), and then assessed …
-
CARBONACEOUS FILLER INCORPORATION IN IMIDAZOLIUM-BASED IONOMER COMPOSITES
… into an elastomeric ionomer and assessed using dynamic mechanical analysis, static tensile analysis, and electrical conductivity. Carbon black, flaked graphite and an expanded graphite product, MesografTM, produced by Grafoid Inc. were mixed into the elastomer in different loadings to …
-
Characterization of brain tissue: Dynamic mechanical testing and viscoelastic modelling
… to potential damage under various conditions of mechanical loading. The studies in this thesis aimed to investigate the viscoelastic properties of brain tissue under various loading conditions and develop viscoelastic models to capture the tissue behaviour. The mechanical properties of brain …
-
Characterisation of coronary arteries: mechanical testing and three-dimensional imaging
… anterior descending (LAD) coronary arteries. The mechanical properties of arteries were quantified using dynamic mechanical analysis, at physiological relevant frequencies. The surface roughness of porcine LAD coronary arteries was quantitatively measured using optical, scanning electron (SEM) and …
-
Development of a Lung Surrogate Model for Assessing Biomechanical Responses to Underwater Explosions (UNDEX)
… is to develop a surrogate modeling framework using engineering materials to investigate the biomechanical response of lung tissue during UNDEX events. A representative lung surrogate was designed to mimic the mechanical behavior of human lungs, utilizing thermoplastic elastomers (TPE) and …
-
Tribology, Uv Degradation, And Structure-Property-Processing
… It was discovered through isothermal kinetics using differential scanning calorimetry that nanodiamonds act as nucleating agents during polyethylene crystallization. A processing technique to disperse nanodiamonds into very viscous ultra-high molecular weight polyethylene was developed and …
-
ROMP-based thermosetting polymers from modified castor oil with various cross-linking agents
… to polymerize different cross-linking agents using ROMP. The effects of incorporating dicyclopentadiene (DCPD) and a norbornene-based crosslinker (CL) were systematically evaluated with respect to curing behavior and thermal mechanical properties of the polymers. Isothermal differential …
-
Viscoelastic properties of the bladder and design of a surgical instrument for the removal of bladder tumours
… aid future work and development in the area. The mechanical properties of normal and malignant bladder tissue were quantified using dynamic mechanical analysis (DMA). A uniaxial testing machine applied sinusoidally varying strains to specimens and the response stresses were measured; from this the …
-
Fundamentals of transport in advanced barrier materials based on engineered antiplasticization
… characterization techniques including dynamic mechanical measurements and solid state 13C cross polarization/magic angle spinning (CP/MAS) NMR. Our oxygen and carbon dioxide transport results were well described by a combination of the free volume based interpretation and interaction …
-
Analytical Modeling for Sliding Friction of Rubber-Road Contact
… rough surface. Material properties are obtained using Dynamic Mechanical Analysis and Time temperature superposition. Influence of the friction models under different conditions are discussed. Model results are validated with experimental data from Dynamic friction tester on a 120-grit surface …
-
Synthesis, Molecular Weight Characterization and Structure-Property Relationships of Ammonium Ionenes
… weight characterization has only been performed using extensive light scattering and viscosity experiments. Performing aqueous size exclusion chromatography (SEC) on ammonium ionenes provides absolute molecular weight determinations while eliminating the need for separate viscosity and light …
-
Characterisation and modelling of biodegradable biomedical fibres
… for soft tissue repair by providing temporary mechanical support while eliminating the need for retrieval surgery. Among fabrication techniques, electrospinning enables the production of micro- and nanoscale fibrous architectures that resemble the hierarchical structure of native tendons and …
-
The Effect of Part Curvature on the Formation of Residual Stresses in Carbon Fiber Prepreg Laminates
… layup configurations are used, with two using regular-thickness plies, [0/90]s and [45/-45]2, and two using thin plies, [0/90]3s and [45/-45]6. The strains that develop during the cure cycle are measured using the DIC and temperature dependent modulus data is obtained using Dynamic …
-
The performance of polymer modified bituminous mixtures.
… techniques.This thesis is concerned with the mechanical behaviour of polymer modified bitumens and the performance of polymer modified bituminous mixtures. The first part of the thesis presents different pavement distresses and the importance of using polymer modified binders to improve the …
-
Thermophysical, Interfacial and Decomposition Analyses of Polyhydroxyalkanoates introduced against Organic and Inorganic Surfaces
… to the use of the biopolymers is their mechanical properties. Reinforcements are therefore a good alternative but disposal concerns then arise. Thus the objective of this dissertation is to investigate a biopolymer nanocomposite where the filler is a synthetically prepared layer double …
-
Physico-chemical properties and component interactions in high solids food systems
… transition of confined water in protein systems using dynamic mechanical analysis.
Page 1 of 3