Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 41 for “"vacuum arc"”.

  1. Fundamentals studies of a magnetically steered vacuum arc.

    … and automobile engine parts has prompted research into both existing and novel methods of laying down hard, low friction coatings . A key process for the production of such coatings has been Physical Vapour Deposition (PVD) which has proved to be a consistent and reliable tool for industry. …

    sheffield-hallam Download PDF for Fundamentals studies of a magnetically steered vacuum arc. (opens in a new tab)

  2. Removal of calcium containing inclusions during vacuum arc remelting

    … of calcium containing inclusions in steel during Vacuum Arc Remelting has been investigated. Laboratory Electron Beam and industrial Vacuum Arc remelting electrodes and ingots were examined. Properties of the steels were determined with the aid of chemical and metallographic methods. It is …

    ubc Repository record for Removal of calcium containing inclusions during vacuum arc remelting (opens in a new tab) Download PDF for Removal of calcium containing inclusions during vacuum arc remelting (opens in a new tab)

  3. Charging of Macroparticles Ejected From a Pulsed Vacuum Arc

    A pulsed vacuum arc discharge emits a plasma as well as macroparticles in the form of micron-sized molten droplets of cathode material. Due to their direction of flight and submicron to 100 mum diameter, these macroparticles often pose a contamination threat for both spacecraft-based thrusters, and …

    uiuc Repository record for Charging of Macroparticles Ejected From a Pulsed Vacuum Arc (opens in a new tab)

  4. Detection of X-Rays from the Anode of a Vacuum Arc

    A vacuum arc with hollow cylindrical anode can generate an arc voltage in excess of 10,000 volts with currents in excess of 1000 amperes. A model has been developed that describes this high arc voltage as being caused by the conduction of the current through an electron space-charge region near the …

    marquette Repository record for Detection of X-Rays from the Anode of a Vacuum Arc (opens in a new tab)

  5. A method for the characterization of white spots in vacuum-arc remelted superalloys

    Vacuum-Arc Remelting (VAR) is an important process for manufacturing Ti- and Ni-based superalloys. Currently, the sources and mechanisms behind microstructural anomalies produced in VAR superalloy ingots are not well understood. In order to help understand formation processes, a method of …

    texas Repository record for A method for the characterization of white spots in vacuum-arc remelted superalloys (opens in a new tab)

  6. Implementation of a high-fidelity axisymmetric model in a Vacuum Arc Remelting process

    Vacuum Arc Remelting (VAR) is a secondary process used for homogenization of high-melting-point and oxygen-sensitive materials such as superalloys and titanium alloys. The VAR process is carried out with the aim of melting a large consumable electrode in such a way that the resulting ingot has …

    texas Repository record for Implementation of a high-fidelity axisymmetric model in a Vacuum Arc Remelting process (opens in a new tab)

  7. Development of vacuum arc thruster technology through printed architecture and improved arc stability

    … of a novel propulsion system based on Vacuum Arc Thrusters (VATs) to address this challenge.<br/><br/>A key focus of this research is the development of an ALl- printed Propulsion system, ALPS. By leveraging 3D printing techniques such as screen printing and selective laser sintering, …

    soton Download PDF for Development of vacuum arc thruster technology through printed architecture and improved arc stability (opens in a new tab)

  8. Numerical grid generation and its application in the solution of a model of the vacuum-arc remelting (VAR) process

    … thesis, we derive the equations which model the Vacuum-Arc Remelting (VAR) process. These equations are solved with body-fitted grid generation techniques and the results are compared with the results of previous authors. A different form for the input source for the VAR process is tested and the …

    soton Download PDF for Numerical grid generation and its application in the solution of a model of the vacuum-arc remelting (VAR) process (opens in a new tab)

  9. Erosion of the Cathode by the Electric Arc in Vacuum

    Vacuum arc devices such as switches, high power vacuum interrupters and vacuum gaps are finding wide application in the control and distribution of electric power. It has been the writer's privilege to participate in the development of these devices over the past several years. These devices …

    marquette Repository record for Erosion of the Cathode by the Electric Arc in Vacuum (opens in a new tab)

  10. Tribological Studies of Ultra-Thin Films at Head/Media Interface for Magnetic Data Storage Systems

    … (ta-C) films developed by filtered cathodic vacuum arc (FCVA) were used as the key material. Different surface treatment (modification) techniques were developed to improve wear resistance of the ta-C coatings while keeping their thickness within an acceptable range (<10nm for the tape drive …

    nus Repository record for Tribological Studies of Ultra-Thin Films at Head/Media Interface for Magnetic Data Storage Systems (opens in a new tab) Download file for Tribological Studies of Ultra-Thin Films at Head/Media Interface for Magnetic Data Storage Systems (opens in a new tab)

  11. Multiplicity in the spectra of cadmium I, II, and III

    … Schüler tube, a helium purifying system and a vacuum arc have also been built and put into operation. The above equipment has been used to investigate the spectra of cadmium, and 51 lines in Cd I and Cd II have been confirmed. Several promising lines , namely λ 4415.62, λ 3533.71 and λ 3250.11, …

    ubc Repository record for Multiplicity in the spectra of cadmium I, II, and III (opens in a new tab) Download PDF for Multiplicity in the spectra of cadmium I, II, and III (opens in a new tab)

  12. Produção, processamento e caracterização de ligas do sistema Ti-Nb-Mo-Zr com baixo módulo de elasticidade para aplicações biomédicas

    … The experimental alloys were obtained via arc melting followed by homogenization heat treatment, while the Ti-23.6Nb-5.1Mo-6.7Zr alloy was produced by vacuum arc remelting (VAR), thermomechanically processed under different conditions and aged. Both samples were characterized by X-ray …

    brazil-uerj Repository record for Produção, processamento e caracterização de ligas do sistema Ti-Nb-Mo-Zr com baixo módulo de elasticidade para aplicações biomédicas (opens in a new tab)

  13. Study of the influence of the plasma torch in a plasma arc melting furnace

    Plasma arc melting, PAM, is used to melt and refine titanium, a reactive alloy often used in the aerospace industry. This thesis looks at the effect of the properties of a plasma torch within PAM, focusing on its use as a mechanism for inputting energy to the ingot. Previous research has failed to …

    birmingham Download PDF for Study of the influence of the plasma torch in a plasma arc melting furnace (opens in a new tab)

  14. Development of a MeVVA based beryllium-7 plasma source

    … for a Malmberg-Penning trap based on Metal Vapor Vacuum Arc (MeVVA) ion source designs. Our primary intent with this MeVVA-type source is to create a confinable beryllium-7 (7-Be) plasma. 7-Be is a peculiar isotope due to its varying radioactive decay half-life in different electro-chemical …

    byu Repository record for Development of a MeVVA based beryllium-7 plasma source (opens in a new tab) Download PDF for Development of a MeVVA based beryllium-7 plasma source (opens in a new tab)

  15. Effect of Al addition on oxidation behavior of Nb-based refractory alloys at elevated temperatures

    … at.%) is reported. The alloys were produced by vacuum arc melting, and the oxidation studies were performed at 800℃, 1000℃, and 1200℃ for 1h, 8h, and 24h, respectively, while the phase constitution, microstructure, and composition of oxidation products were analyzed by XRD, SEM, and EDS. …

    chalmers Repository record for Effect of Al addition on oxidation behavior of Nb-based refractory alloys at elevated temperatures (opens in a new tab)

Page 1 of 3