Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 109 for “"velocity control"”.
-
Study of heave acceleration/velocity control for the surface effect ship.
… of simulation studies of the SES 100-B, a heave controller is designed, tested and coupled with a speed control. Holding the thrust parameter constant, this control system functions by variations of the plenum pressure only and is based on controlled venting by louvers to dampen heave …
-
Robot Force Velocity Control Using Expert System for Control Mode Changes
… however, increase the complexity and cost of the control software. Efficient methods of reacting to sensor information during automated system operation are required to reduce software complexity and expense. This thesis analyzes a robotic construction task and describes a new rule based system …
-
Velocity control of single-rod hydrostatic actuators: component sizing and controller design
Pump-controlled hydraulic actuation of single-rod actuators is more challenging than double-rod actuators due to difference in areas on two sides of single-rod actuators and a need to compensate for differential flow. The performance of a single-rod pump-controlled hydraulic circuit can be …
-
Force Velocity Control with Neural Network Compensation for Contour Tracking with Pneumatic Actuation
Control of the contact force between a robot manipulator and a workpiece is critical for successful execution of tasks where the robot’s end effector must perform a contact operation along the contour of a workpiece. Representative tasks include polishing, grinding and deburring. Considerable …
-
Development and performance of a velocity control system for modern combustion-powered scooters
This doctoral thesis covers the development of a velocity-controlled Throttle-by-Wire-System for modern four-stroke 50 cc scooters (Euro 5). Further, the system performance, fuel-saving effect and exhaust optimization was investigated. The European Parliament has adopted major CO2 emission …
-
Deep Reinforcement Learning for the Velocity Control of a Magnetic, Tethered Differential-Drive Robot
… inspection and maintenance of marine vessels. Velocity control of the crawler is a crucial part in establishing trust and reliability amongst its operators. However, thanks to the crawler's elongated, magnetic wheels and umbilical tether, it operates in a complex environment rich with nonlinear …
-
Development and Application of a Virtual Reality Stumble Method to Test an Angular Velocity Control Orthosis
The Ottawalk-Speed (OWS) orthosis prevents knee collapse in stumble situations. The purpose of this study was to develop a virtual stumble perturbation to measure OWS response to a knee collapse when walking. A new split speed perturbation was developed for the CAREN virtual reality system. This …
-
A Study of the Design of a Digital Controller for Position and Velocity Control of an Automated Transit Vehicle
… present study is to design the vehicle headway controller, assuming that a small general purpose digital computer is available on board , which is to be time shared by other vehicle-systems such as steering control , malfunction , detection , communication etc. The entire study is divided into …
-
Development of a Generalizable Understanding of Cross-Flow Turbine Design: Intracycle Velocity Control and Parametric Changes in Rotor Geometry
… blade-flow interactions: (1) intracycle variable-velocity control to adjust the relative flow experienced by the blades, and (2) modifying rotor geometry---including camber, blade pitch, and chord-to-radius ratio (c/R)---to influence the blade aerodynamics. These approaches are explored through a …
-
Simulation and implementation of vector control of induction motors
… and the practical implementation of vector control of induction motors. The simulation covers the cases where the voltage and current sources are ideal as well as the case of a three-phase inverter is used instead. PMW and SVM were used to impress the necessary voltages to drive the motor. …
-
Adaptive control of a four-bar linkage
Three discrete-time adaptive controllers are developed and applied to Four-bar linkage velocity control to reduce the input link velocity fluctuations without compromising the control system velocity transient response. The successful control techniques use the known mechanism kinematics and the …
-
Inlet metering pump analysis and experimental evaluation with application for flow control
… volumetric displacement are often used to control flow and pressure in hydraulic systems. The displacement control mechanism in these pumps occupies significant space and accounts for significant cost in the pump design. Fixed displacement pumps have lower cost and a more compact design but …
-
Nonlinear Modeling and Control of Automobiles with Dynamic Wheel-Road Friction and Wheel Torque Inputs
… the possibility of automobile dynamic control with wheel torque utilizing this model. The model has been developed from first principles by applying classical mechanics. Inputs to the model are the four independent wheel torques, while the steer angles at each wheel are specified as …
-
Control of a hydraulically actuated mechanism using a proportional valve and a linearizing feedforward controller
… hydraulics is the desire to automate motion control functions in a restricted-cost and restricted-sensor environment. In this thesis a solution to this problem is presented. A velocity control scheme based on a novel single component pressure compensated ow controller was developed and …
-
Telescope Parallel Actuator Mount: Control and Testing
This thesis approaches the task of designing a control system for the Parallel Actuator Mount developed by Dr. John Ridgely and Mr. Garrett Gudgel. It aims to create a base framework that directly controls the telescope and can be expanded to accept external command. It incorporates lower priced …
-
Brushless DC motors, velocity and position control of the burshless DC motor
A velocity feedback controller for the brushless DC motor was designed using the Hall effect sensors. In addition, the position control of the brushless DC motor was developed using an optical encoder to provide the desired position control. A Pittman 5111 wdg #1 brushless motor was used for this …
-
Design and development of an autonomous navigation system for an omni-directional four-wheeled mobile robot
… subsystems: localization, path- following, velocity control, and obstacle detection. The path-following subsystem is responsible for driving the Omnibot along a given path based on feedback about its location relative to its environment. A localization system that uses a combination of …
-
Indoor Autonomous Mobile Surveillance Robot Based on Robot Operating System and Kinect Sensor
… Operating System (ROS) and a Kinect sensor. Its control system was designed with proportional-integral (PI) and proportional-integral-derivative (PID) controllers based on its dynamic model. As key functions of the robot, Simultaneous Localization and Mapping (SLAM), autonomous navigation, face …
Page 1 of 6