Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 35 for “"vibration isolator"”.

  1. Nonlinear vibration isolator with tuneable stiffness and damping

    … there is a necessity to reduce the magnitude of vibrations transmitted from a source to a receiver. Among various techniques available, the most widely embraced solution involves inserting an isolator between the source and the receiver. In this thesis, we explore vibration isolators with …

    auckland-ms Repository record for Nonlinear vibration isolator with tuneable stiffness and damping (opens in a new tab)

  2. Fully pneumatic semi-active vibration isolator design and analysis

    … and controlling a fully pneumatic semi-active vibration isolator system. The prototype vibration isolator system has the ability to adjust the damping and natural frequency characteristics of the system. It consists of an air spring, a variable orifice valve, and an accumulator. In this …

    iastate Repository record for Fully pneumatic semi-active vibration isolator design and analysis (opens in a new tab)

  3. An Investigation on structure-vibration isolator interactions for particular performance

    … particularly in certain application of vibration isolation, there is a need to achieve a special low or high supporting stiffness. There are two methods found to be effective in providing these particular performances mainly nonlinear vibration isolation and/or active vibration …

    soton Download PDF for An Investigation on structure-vibration isolator interactions for particular performance (opens in a new tab)

  4. A Semi-Active Vibration Isolator For 3D Printing On Shipboard

    … quality of the 3D printed parts. Thus, efficient vibration isolation systems are needed for quality production. To this end, in this study, a novel semi-active vibration isolation system called Magnetorheological-based Semi-Active Vibration Isolator (MR-SAVI for short) was proposed. A …

    gsu Repository record for A Semi-Active Vibration Isolator For 3D Printing On Shipboard (opens in a new tab)

  5. Design and control of a vibration isolator using a biased magnetorheological elastomer

    … and control techniques in the area of shock and vibration isolation. Typical passive isolation methods have short comings in meeting competing objectives. A specific problem is isolating electronic packages mounted to military vehicle walls from shock. Often passive elastomer based isolators are …

    unlv Repository record for Design and control of a vibration isolator using a biased magnetorheological elastomer (opens in a new tab) Download PDF for Design and control of a vibration isolator using a biased magnetorheological elastomer (opens in a new tab)

  6. Design, Modelling and Control of an Adaptive Vibration Isolator Featuring Magnetorheological Elastomer

    … utilized in the development of adaptive isolators or absorbers to supress vibrations in wide range of frequencies. The present research study aims to provide a comprehensive investigation of the material characterization and phenomenological modelling of MREs under varying dynamic loading …

    concordia Download PDF for Design, Modelling and Control of an Adaptive Vibration Isolator Featuring Magnetorheological Elastomer (opens in a new tab)

  7. AN ACTIVE VOICE COIL NEGATIVE STIFFNESS VIBRATION ISOLATOR WITH APPLICATION TO MOBILE 3D PRINTING

    … whose performance degrades when exposed to base vibration is often deployed in vibration-rich environments. Using 3D printers in mobile applications, such as vehicles and ships, are typical examples where the extruder and bedplate are easily excited by base vibration. A versatile active vibration …

    mtu Repository record for AN ACTIVE VOICE COIL NEGATIVE STIFFNESS VIBRATION ISOLATOR WITH APPLICATION TO MOBILE 3D PRINTING (opens in a new tab)

  8. Design and Evaluation of a Compact Vibration Isolator for Use In Retrofit Telecommunications Fan Unit Applications

    Fan vibration has become a significant issue in telecommunications environments due to increased performance and heat of internal components requiring greater airflow and higher speed fans. This thesis investigates fan vibration problems in telecommunications equipment and develops solutions to the …

    ottawa-retro Repository record for Design and Evaluation of a Compact Vibration Isolator for Use In Retrofit Telecommunications Fan Unit Applications (opens in a new tab)

  9. Modeling, analysis and non-linear control of a novel pneumatic semi-active vibration isolator: a concept validation study

    … vehicles. The essential problem in designing a vibration isolator for a system comprises of controlling the relative motion between the suspended mass and the base due to stroke limitations, while attenuating the vibration transmitted to the mass from the base. These two requirements being …

    iastate Repository record for Modeling, analysis and non-linear control of a novel pneumatic semi-active vibration isolator: a concept validation study (opens in a new tab)

  10. A Study on Vibration Isolation in a Wind Turbine Subjected to Wind and Seismic Loading

    … of this study is to investigate the use of vibration isolation as a structural control measure to minimize the overall wind and seismic forces transmitted to the turbine. Passive control systems such as tuned mass dampers have previously been proposed to mitigate response to wind loading but …

    waterloo Repository record for A Study on Vibration Isolation in a Wind Turbine Subjected to Wind and Seismic Loading (opens in a new tab)

  11. A design of a marine radar mast system for minimum vibration

    … analyze incoming signals; and (d) design of a vibration absorber and vibration isolator based on an oscillation frequency. An adapted design for the vibration absorber and vibration isolator contributed to the prevention of excessive amplitude being produced by random forces acting upon a radar …

    northern-iowa Repository record for A design of a marine radar mast system for minimum vibration (opens in a new tab)

  12. Dynamic characterisation of vibration isolators

    A vibration isolator is designed to reduce the vibration and structure borne noise transmitted from a vibratory source, such as machinery and equipment, to the supporting structure. The vibration and structure borne noise transmitted depends upon the dynamic properties of the foundation, the source …

    unsw Repository record for Dynamic characterisation of vibration isolators (opens in a new tab)

  13. Control of hand transmitted vibration through development and analysis of a human hand-arm-isolator model

    Investigates hand-held power tool vibration transmitted to the operator's hand and arm. A vibration isolator, based upon the concept of energy flow divider, is proposed and analyzed for its potential benefits in reducing vibration.

    concordia Download PDF for Control of hand transmitted vibration through development and analysis of a human hand-arm-isolator model (opens in a new tab)

  14. ON FURTHER MODELING OF STIFFNESS AND DAMPING OF CORRUGATED CARDBOARDS FOR VIBRATION ISOLATION APPLICATION

    … cardboard, was used as a building block for the vibration isolator with a preliminary study. The present thesis was motivated to advance technology for improving the design of such a corrugated cardboard vibration isolator with a focus on the modeling of its stiffness and damping. In particular, …

    sask Repository record for ON FURTHER MODELING OF STIFFNESS AND DAMPING OF CORRUGATED CARDBOARDS FOR VIBRATION ISOLATION APPLICATION (opens in a new tab)

  15. INVESTIGATION OF CORRUGATED CARDBOARD FOR VIBRATION ISOLATION

    Vibration isolation is a common approach to reduce the undesired vibration of a dynamic system from its surrounding. The common material used for the vibration isolator is rubber (for example) which is known to be environmentally unfriendly. This thesis presents a study on the use of corrugated …

    sask Repository record for INVESTIGATION OF CORRUGATED CARDBOARD FOR VIBRATION ISOLATION (opens in a new tab)

  16. Hard Magnetorheological Elastomers: Experimental Characterization, Modeling and Application

    … potential application of H-MREs in an adaptive vibration isolator. For this purpose, H-MREs with 15% volume fraction of neodymium–iron–boron (NdFeB) magnetic particles have been fabricated and then tested under oscillatory shear motion using a rotational magneto-rheometer to investigate their …

    concordia Download PDF for Hard Magnetorheological Elastomers: Experimental Characterization, Modeling and Application (opens in a new tab)

  17. Dynamic analysis of flexibly supported four-bar mechanical linkage

    … potential energy storage elements and flexible vibration isolator support systems are synthesized to passively control the highly-nonlinear motion of a planar four-bar mechanical linkage. Specific investigations of design/performance indices for the spring restrained, flexibly supported linkage …

    ttu Repository record for Dynamic analysis of flexibly supported four-bar mechanical linkage (opens in a new tab)

  18. Six degree of freedom active vibration isolation using quasi-zero stiffness magnetic levitation.

    Vibration is recognised as one of the most significant disturbances to the operation of mechanical systems. Many traditional vibration isolator designs suffer from the trade-off between load capacity and isolation performance. Furthermore, in providing sufficient stiffness in the vertical direction …

    adelaide Repository record for Six degree of freedom active vibration isolation using quasi-zero stiffness magnetic levitation. (opens in a new tab)

  19. Nonlinear vibration isolators with asymmetric stiffness

    A vibration source is commonly coupled to a receiving structure by a vibration isolator. A key trade-off in the choice of vibration isolator is the requirement for a wide frequency range of isolation without excessive static deflection. This compromise can, in principle, be circumvented by …

    soton Download PDF for Nonlinear vibration isolators with asymmetric stiffness (opens in a new tab)

  20. Active isolation of machinery vibration from flexible structures

    … be isolated from a supporting structure if the vibration is likely to cause fatigue of components or annoyance to people due to direct vibration exposure or from the noise radiated by the vibrating structure. Active vibration isolation can be applied in these situations to extend the low …

    adelaide Repository record for Active isolation of machinery vibration from flexible structures (opens in a new tab)

Page 1 of 2