Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 133 for “"vinyl ester"”.
-
Moisture diffusion through vinyl ester/clay nanocomposites
Moisture diffusion was studied through vinyl ester samples containing up to 5 wt% montmorillonite clay; two different kinds of clay surface treatments were employed to make the clay compatible with the vinyl ester resin. These nanocomposites were characterized using differential scanning …
-
Dispersion of carbon nanotubes in vinyl ester polymer composites
… carbon nanotubes (XD-CNTs) were dispersed in vinyl ester (VE) using an ultra-sonic probe at a fixed frequency. The power, amplitude, and mixing time parameters of sonication were correlated to the electrical and mechanical properties of the composite materials in order to optimize dispersion. …
-
Synthesis, Characterization and Properties of Vinyl Ester Matrix Resins
Vinyl ester oligomers diluted with styrene are important matrix resins for thermosetting polymer composites. A major objective of this work has been to study the chemistry and kinetics of the cure reactions of vinyl ester resins at elevated curing temperatures, which are consistent with typical …
-
INTERLAMINAR FATIGUE OF THICK-SECTION GLASS FABRIC/VINYL ESTER COMPOSITE
… were established for a glass fabric/vinyl ester composite. Both show a fatigue limits below 40% of static interlaminar strengths. Fatigue failure was mostly initiated at the interply interphase which contained the highest amount of defects and stress concentrations.
-
Lignin-derived thermosetting vinyl ester resins for high performance applications
Vinyl ester (VE) resins are utilized to produce polymer matrix composites for use in a wide range of applications due to possessing relatively high moduli, strengths, and glass transition temperatures while maintaining low weight and cost. VE resins often contain high concentrations of a …
-
Microwave processing of vinyl esters and vinyl ester/glass fiber composites
Thesis (M.S.)--Michigan State University. Department of Chemical Engineering, 1993
-
Alkaline durability tests for E-glass/vinyl ester-reinforced polymer with nanoclay
… prepared and used in this study. One was E-glass/vinyl ester glass fiber reinforced polymer (plain GFRP) and the other was nano-GFRP prepared with the addition of 1 wt% of CloisiteRTM 10A nanoclay. These samples were aged in an alkaline solution (pH = 13.2) with 3560N (800-lbs), 2225N (500-lbs) …
-
The Study Of Vinyl Ester Copolymers Derived From Bio-Sourced Fatty Acids
… thermoplastics using monomers, especially linear vinyl esters (LVEs), which originate from cracked oil-based fatty acids. Commercial LVEs were used in this dissertation study in order to explore some key properties of the resultant copolymers using current polymer synthesis and characterization …
-
Quasi-Static and Fatigue Evaluation of Pultruded Vinyl Ester/E-Glass Composites
… of cross-ply, angle-ply, and quasi-isotropic vinyl ester/E-glass non-woven tricot stitched fabric composite laminates fabricated from the Continuous Resin Transfer Molding (CRTM) pultrusion process were the focus of this research. The tricot stitch and the 6% vinyl ester matrix cure shrinkage …
-
Interfacial engineering of the interphase between carbon fibers and vinyl ester resin
Thesis (Ph. D.)--Michigan State University. Department of Chemical Engineering and Materials Science, 2003
-
The Physico-Chemical Investigation of Interfacial Properties in Natural Fiber/Vinyl Ester Biocomposites
… physical and chemical properties of flax fibers, vinyl ester resin and their composites are investigated. A comprehensive understanding of flax fiber, vinyl ester systems and their composites has been established. Surface modifications to the flax fiber and chemical manipulations on vinyl ester …
-
Moisture diffusion through neat and glass-fiber reinforced vinyl ester resin containing nanoclay
… neat resin as well as glass-fiber reinforced vinyl ester samples, both containing up to 5 wt% montmorillonite clay. Transient and steady-state diffusion experiments were carried out with both neat resin as well as glass-fiber reinforced samples. Effect of saline and alkaline solutions on the …
-
Spectroscopic Characterization of Molecular Interdiffusion at a Poly(Vinyl Pyrrolidone) / Vinyl Ester Interface
Mechanical properties of (woven carbon fiber / vinyl ester matrix) composites can be greatly improved if the interphase between the reinforcing high-strength low-weight fiber and the thermoset resin is made more compliant. In order to improve the adhesion of the vinyl ester matrix to the carbon …
-
Effect of manufacturing process conditions on the durability of pultruded vinyl ester/glass composites
Fiber reinforced polymer composites, FRPs, have an increased role in structural applications. Environmental durability is important for the design of structural components. Processes such as pultrusion are cost-effective methods of producing FRPs. This research focused on the durability of …
-
Effect of Seawater and Temperature Upon Carbon Fiber/Vinyl Ester (CFVE) Composites and its Constituents
… micro- and macro-response of the carbon fiber vinyl ester composites (CF/VE). Compression properties degradation due to short-term and long-term exposure to seawater is evaluated. A 12-16 % reduction in compression strength is observed due to long-term exposure to seawater, which is attributed …
-
Fatigue Characterization of Glass Fiber Reinforced Vinyl Ester and Polyester Composites Containing Core Shell Rubber Particles
… particles (CSRP) modified glass fiber reinforced vinyl ester and polyester composites. Composites containing 2 wt%, 5 wt% and 10 wt% core shell rubber particles were manufactured using Vacuum Assisted Resin Transfer Molding (VARTM). Composite samples were tested for tensile, compressive, shear, …
-
Durability of E-glass fiber reinforced vinyl ester polymer composites with nanoclay in an alkaline environment
… were prepared. One was E-glass fiber reinforced vinyl ester polymer and the other was nano-GFRP prepared with the addition of 1 and 2 wt% of montmorillonite clay. These samples were aged in alkaline solution of pH 13.2 with and without sustained load. The load was 1335 N or 18.75% of the tensile …
Page 1 of 7