Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 163 for “"void formation"”.
-
Void Formation and Mortality During Liquid Composite Molding
… One obstacle to that end is the phenomenon of void formation during the LCM infusion processes. The formation of these voids through different mechanisms leads to composite parts with lower mechanical properties and consistency than their pre-impregnated autoclave cure counterparts. The …
-
Intermetallic Void Formation in Cu-Sn Micro-Connects
… of 3D-intergrated systems is Cu-Sn intermetallic void formation. Results of this work has been separated as follows: (i) understanding the sporadic behaviour of void formation, (ii) understand the key parameters influencing voiding formation, (iii) examine the microstructural and chemical …
-
Void formation during tensile testing of dual phase steel
Includes bibliographical references.
-
Void Formation in Model Liquids, Polymer Glasses, and Granular Materials
… Cavitation in glassy polymers can lead to either void growth and coalescence (i.e., brittle fracture) or “ductile” void growth. However, determining which type of cavitation will occur for a given sample and deformation protocol is quite difficult in general. We employ generic polymer glass model, …
-
Fundamental study of underfill void formation in flip chip assembly
… process reported created a large number of voids among solder interconnects in FCIP. The voids formed among solder interconnections can propagate, grow, and produce defects such as solder joint cracking and solder bridging. Moreover, these voids can severely reduce reliability performance. …
-
Studies on void formation and growth for incompressible nonlinearly elastic materials
Thesis (Ph. D.)--Michigan State University. Department of Metallurgy, Mechanics and Materials Science, 1988
-
Experimental study of void formation in solder joints of flip-chip assemblies
Voids in solder bumps have been a critical reliability issue as electronic components continue to shrink in size. This dissertation addresses the formation of voids in solder joints of flip-chip assemblies. Specifically, experimental techniques have been developed to study how the heat flux …
-
In Situ Analysis of Void Formation at the Flow Front in RTM
… is to empirically investigate flow front void formation rates and post-formation bubble mobility behavior for composites produced via resin transfer molding (RTM).For this study, in situ observation of bubble formation and migration was accomplished by photographing resin flow progression …
-
Void Formation During Liquid Composite Molding Under Varied Pressure with Mechanical Properties Validation
… in conjunction with an autoclave to minimize voids, but it is very expensive and requires a great amount of space. The less expensive alternative to prepreg-autoclave processes is known as Liquid Composite Molding (LCM), in which the resin is brought into a mold via overpressure on the resin …
-
Vacancy clustering and void formation in energetically processed magnesium alloys: A transition interface sampling study
… microstructures can be achieved via mechanical deformation processing, although the precise physics of this process remain unclear. Notably, elevated concentrations of vacancies arise during such processing methods as well as during radiation, potentially playing a crucial role in the …
-
Study of initial void formation and electron wind force for scaling effects on electromigration in Cu interconnects
… The dissertation first studies the initial void growth under EM, which is critical for measurement of the EM lifetime and statistics. A method based on analyzing the resistance traces obtained from EM tests of multi-link structures has been developed. The results indicated that there are …
-
In-Situ Void Formation During Liquid Composite Molding for Preformed Warp, Weft, and Alternating Orientation RTM Samples
… with resin processed in an autoclave to reduce void content. The autoclave process is expensive and takes up a large amount of space, so liquid composite molding (LCM) is a less expensive alternative. The parts produced using LCM can be manufactured to rival the mechanical performance of parts …
-
An Evaluation of Void Formation in Ex-Service and Creep Tested HP Alloy Tubing Used for Hydrocarbon Reforming
… experience failure during service caused by the formation of voids in the tube wall brought on by creep stress generated by the pressure differential and thermal gradient between the inside and outside diameters of the tube. The purpose of this project was to analyze the formation of voids in …
-
Investigations on Void Formation in Composite Molding Processes and Structural Damping in Fiber-Reinforced Composites with Nanoscale Reinforcements
… issue during these processing methods is void formation due to incomplete wet-out of the resin within the fiber preform, resulting in discontinuous material properties and localized failure zones in the material. A fundamental understanding of the resin evolution during processing is …
-
Investigation of the Resin Film Infusion Process for Multi-scale Composites Based on the Study of Resin Flow, Void Formation and Carbon Nanotube Distribution
… Phase 3 consists in the characterisation of void formation during RFI. Two types of voids are observed: flow-induced voids resulting from either the merging of resin flow fronts or the drainage from capillary action; and gas-induced voids resulting from resin volatiles going out of solution …
-
Thermal stress induced voids in nanoscale Cu interconnects by in-situ TEM heating
Stress induced void formation in Cu interconnects, due to thermal stresses generated during the processing of semiconductors, is an increasing reliability issue in the semiconductor industry as Cu interconnects are being downscaled to follow the demand for faster chip speed. In this work, 1.8 …
-
An Investigation of Nano-voids in Aluminum by Small-angle X-ray Scattering
… radiation was used to characterize nano-sized voids in different nominally pure aluminum (Al) alloys produced by quenching. The scattering signal from nano-voids is shown to be predictable from SAXS theory, and the information related to the void population confirm past experiments and reveal …
-
Influence of topography at the lithium metal/solid electrolyte interface in all-solid-state batteries
… such as dendrite growth during charging and void formation during discharge. This thesis investigates the influence of topography at the lithium metal/solid electrolyte interface on dendrite growth and void formation, aiming to identify underlying factors and potential improvements. …
Page 1 of 9