Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 34 for “"vortex tube"”.
-
The vortex tube
Theories of the operation of the vortex tube have been offered by men of many vocations. Some have even tried to justify their theories by mathematical analysis. However, in the writer's estimation, none of these theories had been proven conclusively. In the the allotted to a master's thesis, it is …
-
Experimental investigation of vortex tube concepts
The vortex tube is a very simple device which separates a compressed gas into a cold and a hot stream. The compressed gas is injected tangentially into the tube inlet by means of a nozzle. The gas develops a swirling motion in the tube. The gas leaving the tube near the wall will be warmer and that …
-
Aerodynamic Interactions in Vortex Tube Separator Arrays
… device for engine air-particle separation is the vortex tube separator (VTS), which uses centrifugal forces in a vortical flow to radially filter foreign particles from a duct with an annular exit. Dozens or hundreds of these devices are linked together on a shared manifold known as a VTS array. …
-
The working principle of a Ranque-Hilsch vortex tube.
A vortex tube is a Thermo-fluidic device, which generates cold and hot streams from a single injection of pressurized gas. Without any moving parts or chemical reaction within the tube, the interesting phenomenon of energy separation results only from fluid dynamic effects. The main part of a …
-
Generation and Analysis of Streamwise Vortices from Vortex Tube Apparatus
A pressurized vortex tube is used to generate streamwise vortices in a wind tunnel and the resulting flow behavior is analyzed. The apparatus is intended to verify computational data from the AFRL by offering a method of conducting real-world counterpart experiments. The apparatus design process …
-
Cop and capacity improvement through work and heat recovery by using vortex tube
The vortex tube is an intriguing device that separates an incoming high-pressure fluid stream into two low-pressure streams. Work interaction during the expansion process causes a temperature decrease in one of the two exit streams, while the other one experiences a temperature increase. The …
-
Experimental investigation of vortex tube and vortex nozzle for applications in air-conditioning, refrigeration, and heat pump systems
The Ranque-Hilsch vortex tube can separate an incoming high pressure fluid stream into two low pressure fluid streams with different temperatures. In this project, the applicability of expansion work recovery through vortex tube in heating and cooling cycles has been examined. Vortex tube thermal …
-
The effect of forced disturbances on vortex breakdown
… to study the effects of external forcing on the vortex in a vortex tube. The vortex tube had a slit entrance tangent to the tube's inner diameter and perpendicular to the tube's axis. Various dye flow visualization methods were used to visualize the vortex flow and the core. Forcing was …
-
Dynamic Wake Distortion Model for Helicopter Maneuvering Flight
… ratio are investigated by using a dynamic vortex tube analysis. Based on the vortex tube results, a rotor dynamic wake distortion model, which is expressed in terms of a set of ordinary differential equations, with rotor longitudinal and lateral wake curvatures, wake skew and wake spacing …
-
Large Eddy Simulation of Supersonic Twin-Jet Impingement Using a Fifth-Order WENO Scheme
… formed by the alternating merging of a primary vortex tube with a secondary vortex tube induced by the neighboring primary vortex tube. The nondimensional period of flapping is found to be 7𝐷*/𝑊ₒ*. High unsteadiness and strong interaction between the fountain and the jets are also observed. Due …
-
Experimental Parametric Study of a True Airspeed Sensor
… basically consisted of swirl generator and vortex tube sections and pick-up signal system. A regression analysis was performed on the experimental results to obtain the effect of each parameter individually on the frequency response. The most significant parameters were selected by the …
-
The evolution of vortices in a turbulent boundary layer
… this investigation, the evolution of a perturbed vortex tube near a boundary is examined in order to gain insight into turbulent boundary layer phenomena. A Lagrangian vortex model is used to describe the vortex tube evolution, including the influence of shear. Based on numerical calculations, it …
-
Mechanisms of turbulent flame propagation
… approach, laminar flame propagation across a vortex tube is employed, whilst in the second the concept of reaction time in the vortex tube is used. It is shown that the rate of burning in small eddies can be many times greater than that in large eddies. Theoretical values are obtained for the …
-
Acoustic Streaming as a Mechanism of the Ranque-Hilsch Effect
<p>The Ranque-Hilsch effect or the vortex tube effect is a striking phenomenon observed in swirling flows where air injected tangentially into a single pipe, separates spontaneously into two streams; the colder stream near the tube centerline and the hotter stream near its periphery. In spite of …
-
Blast shock-wave characterization in experimental shock tubes
… therapeutic tools, compressed gas-driven shock tubes are used by investigators to study shockwave-animal specimen interactions and its biological consequences. However, shock tubes are designed and operated in a variety of geometry with a range of process parameters, and the quality of shock …
Page 1 of 2