Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"wall heating"”.

  1. Instigating buoyancy driven convection to improve membrane distillation performance

    … we can strengthen this convection by actively heating the feed channel in a direct contact membrane distillation (DCMD) system. For that purpose, we develop several actively heated prototypes and perform a series of experiments to explore how active heating affects distillate production. The …

    colo-mines Repository record for Instigating buoyancy driven convection to improve membrane distillation performance (opens in a new tab)

  2. Influence of surface geometry and heating on the flow structure in wall-bounded flows

    … investigation of the impact of different wall roughness on the turbulent properties in a smooth channel. The results show the different wall roughness has significant effects on the mean streamwise velocity and Reynolds stress distribution. For other turbulent properties, the enhancement …

    concordia Download PDF for Influence of surface geometry and heating on the flow structure in wall-bounded flows (opens in a new tab)

  3. Transonic Compressor Test Rig rebuild and initial results with the Sanger stage

    … made in preparation for testing. A Plexiglas casewall was chosen to accommodate pressure-sensitive paint measurements. Wall heating was used to control tip-clearance. The initial performance data, to 70% design speed, were compared with predictions using a 3-dimensional viscous code

    nps Repository record for Transonic Compressor Test Rig rebuild and initial results with the Sanger stage (opens in a new tab)

  4. The effect of heat transfer on boundary layer stability

    … the transition point is generally advanced by wall heating. and confirmed the results of other authors. The turbulent separation measurements were made on the inner wall of a curved duct, again at low air velocities. Advancement of the separation point in response to wall heating was observed, …

    glasgow Repository record for The effect of heat transfer on boundary layer stability (opens in a new tab) Download PDF for The effect of heat transfer on boundary layer stability (opens in a new tab)

  5. Effect of Wall Temperature Control on Low-Speed Axisymmetric Body Drag

    … results of a numerical study of the effect of wall temperature control on the low speed aerodynamic drag of axisymmetric bodies at turbulent Reynolds numbers and zero angle of attack. Results for both skin-friction and pressure drag were computed for slender bodies using first-order …

    odu Repository record for Effect of Wall Temperature Control on Low-Speed Axisymmetric Body Drag (opens in a new tab)

  6. Simulations of Unsteady Shocks via a Finite-Element Solver with High-Order Spatial and Temporal Accuracy

    … in stagnation regions, resulting in non-physical wall heating. Modifications were made to the solver's shock capturing approach that changed the calculation of the artificial diffusion flux term (Fa̳d̳) and the shock sensor. The changes to Fa̳d̳ were designed to vary the application of artificial …

    utk-theses Repository record for Simulations of Unsteady Shocks via a Finite-Element Solver with High-Order Spatial and Temporal Accuracy (opens in a new tab)

  7. Non-isothermal falling film flows with variable viscosity: stability and non-uniform steady states

    … inclined, heated plane. We consider two types of wall heating: uniform and non-uniform. We examine the heat transfer of a viscoelastic liquid film with variable viscosity as it flows over a uniformly heated plane. The polymeric viscosity is modeled using the Oldroyd-B model, and, as the solvent …

    greece Repository record for Non-isothermal falling film flows with variable viscosity: stability and non-uniform steady states (opens in a new tab)

  8. Numerical modelling and experimental study of rollover in cryogenic liquids and liquid freon

    … tank. A long glass dewar with up to 180cm wall heating length was constructed to study the effect of a turbulent wall boundary layer on the dependence of the surface heat flux on bulk liquid superheat. Schlieren flow visualization was carried out to reveal surface convective patterns. …

    soton Download PDF for Numerical modelling and experimental study of rollover in cryogenic liquids and liquid freon (opens in a new tab)

  9. Οι λουτρικές εγκαταστάσεις στη Μακεδονία κατά τη ρωμαϊκή αυτοκρατορική και την πρωτοβυζαντινή περίοδο

    … which comes from a complex underfloor and wall heating system. Initially, there is the catalogue of the lemmata – the buildings that are investigated. Each lemma contains 13 fields. The data of our research is analyzed comparatively in the main partof the study. Based on the fields that we …

    greece Repository record for Οι λουτρικές εγκαταστάσεις στη Μακεδονία κατά τη ρωμαϊκή αυτοκρατορική και την πρωτοβυζαντινή περίοδο (opens in a new tab)

  10. Large eddy simulation of turbulent flows with variable property heat transfer using a compressible finite volume formulation

    … applied to a plane channel flow with constant wall heating rates of magnitudes large enough to cause significant property variations across the channel. The effects of high heating versus high cooling on the turbulence quantities and turbulent structure were studied. Finally, the LES …

    iastate Repository record for Large eddy simulation of turbulent flows with variable property heat transfer using a compressible finite volume formulation (opens in a new tab)

  11. Numerical investigation of transition control of a flat plate boundary layer.

    … an incompressible fluid is studied using surface heating techniques. The spatially evolving boundary layer is simulated. The Navier-Stokes and energy equations are integrated using a fully implicit finite difference/spectral method. The Navier-Stokes equations are in vorticity-velocity form and …

    arizona-thes Repository record for Numerical investigation of transition control of a flat plate boundary layer. (opens in a new tab)

  12. Analyses of advanced concepts in multi-stage gyro-amplifiers and startup in high-power gyro-oscillators

    … (CPI) for electron-cyclotron resonance heating (ECRH) and current drive experiments on the "Wendelstein 7-X" stellarator plasma. Also presented are the results for a 110 GHz, 1.5 MW gyrotron currently being developed at CPI. The simulations are carried out for six competing modes and …

    maryland Repository record for Analyses of advanced concepts in multi-stage gyro-amplifiers and startup in high-power gyro-oscillators (opens in a new tab)

  13. A fluid-solid coupled heat transfer methodology as applied to rotating cavities

    … thesis, it is shown that it is necessary to use wall-resolved large eddy simulation (LES) to accurately capture the fluid domain flow structures, and to use CHT to capture the interaction of the wall heating conditions and the cavity aerodynamics. The main challenge in LES-CHT is that the …

    oxford Repository record for A fluid-solid coupled heat transfer methodology as applied to rotating cavities (opens in a new tab)

  14. Development of Stabilized Finite Element Framework to Model Compressible Turbulent Flows Using Spalart–Allmaras Model

    … range of Mach numbers. These cases involves cold wall hypersonic flat plate case, supersonic flat plate, shock wave boundary layer interac-tion (SWBLI), compression corners and supercritical transonic airfoil. The results from current stabilized formulation are compared with the experimental data …

    calgary Repository record for Development of Stabilized Finite Element Framework to Model Compressible Turbulent Flows Using Spalart–Allmaras Model (opens in a new tab)

  15. Bubbles and soft-materials: from computational modeling to applications.

    … Modified Tait or the MNASG EoSs. Then, the rigid-wall heating in lithotripter pulse induced collapse of an air bubble is investigated. A significant temperature increase of 25K was observed at the lowest selected standoff distance which could lead to thermal damage. Thirdly, motived by the latest …

    city-london Download PDF for Bubbles and soft-materials: from computational modeling to applications. (opens in a new tab)

  16. Vytápění s využitím velkoplošných sálavých konstrukcí

    Tato práce se zabývá tématem – Vytápění s využitím velkoplošných sálavých konstrukcí. Teoretická část obsahuje rozdělení podlahového, stěnového a stropního vytápění. Toto téma je aplikováno v druhé části práce na zadané budově. Projekt řeší návrh přípravy teplé vody, stěnového vytápění a …

    brno-tech Repository record for Vytápění s využitím velkoplošných sálavých konstrukcí (opens in a new tab)

  17. Systémy se stěnovým vytápěním

    Tato práce se zabývá tématem „Systémy se stěnovým vytápěním“. Na toto téma je zpracována teoretická část. Dále experimentální část, která se zabývá měřením stěnového vytápění a porovnáním výsledků se softwarem CalA. Následně je toto téma aplikováno na zadané budově, ve kterém je stěnové vytápění …

    brno-tech Repository record for Systémy se stěnovým vytápěním (opens in a new tab)

  18. Velkoplošné sálavé otopné systémy

    Cílem bakalářské práce bylo zpracovat souhrn velkoplošných sálavých otopných soustav a prvků používaných v těchto soustavách. Dalším cílem práce bylo jejich konstrukční řešení a vhodnost použití. Nakonec bylo provedeno zhodnocení a porovnání těchto soustav.

    brno-tech Repository record for Velkoplošné sálavé otopné systémy (opens in a new tab)

  19. Tepelná čerpadla s možností chlazení

    Bakalářská práce zahrnuje základní rozdělení tepelných čerpadel, přičemž se specializuje na tepelná čerpadla s možností chlazení. Blíže určuje výhodnější typy tepelných čerpadel pro vytápění i chlazení. Přibližuje jejich funkce, výhody i nevýhody. Zabývá se také úpravami otopných soustav pro …

    brno-tech Repository record for Tepelná čerpadla s možností chlazení (opens in a new tab)

Page 1 of 2