Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 15 of 15 for “"wear factor"”.
-
RELIABILITY ANALYSIS OF SLIDING COMPONENTS
… physical law governing the plasticitydominated wear and the mild-oxidational wear processes : the Archard's wear theory (1953). Wear tests using a pin-on-disk configuration are conducted for 3 different pin materials to obtain the required data: the Archard wear factor. The pin materials used …
-
A wear analysis study of selected alternative foundry tooling materials using impact abrasion testing
The purpose of this study was to simulate the wear characteristics of foundry tooling using an impact abrasion test apparatus. The wear characteristic was exhibited by non-metallic materials and was measured as a function of percentage weight loss and was benchmarked against Class 30 gray iron. The …
-
Investigation of the gouging abrasion resistance of materials in the mining industry
… the profitability of today's mines. Abrasive wear reduction is a novel way to reduce costs and increase productivity. Specifically, gouging abrasion is making an increased contribution to abrasive wear losses in the oil sands industry. To assess material property requirements for mitigating …
-
Tribochemical interaction of newly developed organic lubricant additives with ZDDP; the influence of organic additives on tribological performance of ZDDP
… lubrication condition. ZDDP is an effective anti-wear (AW), anti-oxidant (AO) and extreme pressure (EP) additive but presence of ZDDP in engine oil increases the engine friction and have negative impact on the fuel economy. Organic friction modifiers (OFMs) are environmentally friendly lubricant …
-
The Effects of Machining on Structure and Tribological Properties of Ultra High Molecular Weight Polyethylene for Artificial Joint Prostheses
… more damage on the structure of machined UHMWPE. Wear factor decreased as cutting speed increased if tool feed rate was kept unchanged. Wear factor increased as cutting speed increased when the ratio of cutting speed and tool feed rate was kept constant. There was an optimum depth of cut for the …
-
The wear and biological activity of antioxidant UHMWPE for use in total hip replacements
… an UHMWPE acetabular cup, however, UHMWPE wear debris is generated over time, and this wear debris stimulates an osteolytic immune response around the implant, leading to aseptic loosening and eventually failure of the prosthesis. Highly crosslinked UHMWPE has been developed with excellent …
-
Development of high performance tribological coatings for application onto hip joint prostheses
… and WHMWPE substrates in order to improve the wear properties. It was identified that depositing a hard coating onto soft substrate would cause high stresses and lead to coating delamination. Consequently the polyethylene substrates were ion implanted with nitrogen to reduce the hardness …
-
Design and construction of a microtribometer and its use in the study of the micro/nanotribological behavior of ultra-high molecular weight polyethylene (UHMWPE)
… (UHMWPE) on the friction behavior and onset of wear in a UHMWPE/silicon nitride interface in both dry ambient and bovine serum environments is explored. A ball-on-flat microtribometer using a silicon nitride ball was constructed in order to examine tribological properties of multi-asperity …
-
Effect of lubricant on the wear of prosthetic joint materials
The wear of ultra-high molecular weight polyethylene (UHMWPE) in prosthetic hip and knee joints is a significant clinical problem. The wear particles cause inflammatory tissue reactions which may lead to osteolysis and loosening of the implant fixation. The effect of lubricant on the wear of …
-
Tribology of prosthetic joints : validation of wear simulation methods
… to be caused mainly by tissue reactions to wear particles removed from ultrahigh molecular weight polyethylene bearing surfaces. The tissue reactions, leading to bone loss, depend on the size and amount of the particles. Wear simulators are important in the evaluation of prosthetic joints …
-
Tribometer with programmable motion and load to investigate the influence of molecular structure on wear of orthopaedic polyethylene
… (UHMWPE) counter-bearing. A novel six-station, wear tribometer, featuring programmable load and motion, was designed to further the investigation into wear, sub-surface plasticity and debris generation of UHMWPE. This thesis describes the pin-on-plate device, its validation and subsequent use to …
-
The influence of heat production relative to drill wear during osteotomy preparation by different implant drill systems: A comparison study between ceramic and conventional implant drill systems
… of implant drills progressively increases their wear and decreases their efficiency, thus producing more frictional heat. Multiple factors have been linked to heat production during surgery including drill sharpness. The purpose of this research is to focus on the heat generated by an implant …
-
Catalytic ceramic conversion of Zr702 alloy surfaces for combating wear and corrosion
… their low hardness, high friction and poor wear resistance have prohibited their tribological and tribo-corrosion applications. Recently developed novel catalytic ceramic conversion treatment (CCCT or C3T) has been shown to successfully improve the tribological and tribo-corrosion properties …
-
Metal ceramic wear mechanisms
Sliding wear of metal-on-ceramic, ceramic-on-metal, and ceramic-on-ceramic have been investigated using a tri-pin-on-disc machine. A technique has been developed for thin foil preparation for transmission electron microscopic examination perpendicular to the wear surface. The role of transformation …
-
Processing, Structure, and Tribological Property Interrelationships in Sputtered Nanocrystalline ZnO Coatings
… necessary to achieve low sliding friction and wear along with substrate biasing. In addition, other analyses such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), and selected area electron diffraction (SAED) were utilized to study the solid lubrication mechanisms …