Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 130 for “"wear testing"”.
-
Seizure and wear testing methodology
<p>In this work the seizure as an adhesive wear has been discussed and analyzed The diffusion hypotheses is accepted as the seizure mechanism. It was determined that the surface of machine components, material properties, and contact stresses in sliding and loading zone are responsible for the …
-
Modification of wear testing methodology
… surface treatment were tested on the modified wear testing machine. Operational surface roughness was measured in all stages of running-in, steady state and catastrophic wear. The difference between technological and operational surface roughness was observed. The results show that the surface …
-
Wear and development of wear testing methodology
<p>The existing wear and friction theories, and wear testing methods have been analysed to meet the objective of this study. One of the key factors in the analysis of a wear problem is the computation of wear and friction coefficient for a material, under real operating conditions. A new wear …
-
Characterization of the mitral valve using accelerated wear testing
… fundamental need for a better kind of long-term testing for artificial heart valves along with a biologically equivalent artificial mitral valve. Accelerated wear testing has been used for a long period of time in the engineering field to test the failure modes of materials and devices, but has …
-
Modification of wear testing machine and study of wear resistance
In this work a modification of a wear testing machine has been done by designing a new loading mechanism and redesigning different components for a new roller-on-roller wear testing machine. A new loading mechanism containing gearbox frame and load cell assembly have been designed, manufactured and …
-
Wear testing and finite element analysis of nitrile rubber (NBR) hand pump seals
… technical cause of hand pump failures was the wear of the piston seals. The contact surface of the piston seals with the bore surface (Brass) of the cylinder and the piston seal contact area are the key to calculating and determining seal friction force and seal wear rate. Several researchers …
-
Experimental Wear Testing Of The Piston In An Offset Crank-Slider Hydraulic Pump
… is a prevalent issue that leads to friction and wear. It’s crucial to ensure adequate lubrication at the pistoncylinder interface to minimize wear and friction while enhancing efficiency. This thesis aims to shed light on the effects of side load and the resultant wear in an offset slider crank …
-
Development of a flexible control and automated data acquisition system for wear testing
… and automated data acquisition system for wear testing procedure. A programmable logic controller (PLC) control philosophy and PC-based automated data acquisition system (DAS) were designed and organized for the wear testing machine in Surface Engineering Laboratory of Mechanical …
-
A comparison of a stretch woven fabric with a conventional woven fabric by laboratory and wear testing
… fabrics to the conclusions of an actual wear study, and to determine if the stretch fabric provides more wearing comfort than the non-stretch fabric. The fabrics were as follows: Stretch fabric--62 percent Trevira polyester, 35 percent Avril rayon, and 3 percent Lycra spandex with the …
-
Design of a Cyclic Sliding, Dynamically Loaded Wear Testing Device for the Evaluation of Total Knee Replacement Materials
… of up to seven times body weight. However, most wear testing machines that have been used to evaluate total knee replacement materials are unidirectional and/or apply only static force. This thesis presents an alternate wear testing device capable of simulating the most prevalent motions of the …
-
Use of physiological and perceptual dimensions of clothing comfort to evaluate nonwoven protective fabrics through wear testing of limited-use coveralls
… the skin. Five fabric types were evaluated by wear testing coveralls and measuring selected physiological and perceptual responses of five subjects performing moderate-intensity exercise in thermoneutral and hot, humid environments. Physiological responses included skin temperature, body …
-
The effect of lubricant composition on the wear behaviour of polyethylene for orthopaedic applications
The composition of orthopaedic wear testing lubricants used to mimic synovial fluid (SF) is known to significantly affect in vitro polyethylene (PE) wear; however, some wear testing standards may be promoting the use of lubricants that are not clinically relevant. The present thesis evaluated the …
-
Wear and Boundary Lubrication in Modular Total Knee Replacements
Wear of the polyethylene (PE) bearing surface and wear particle-induced osteolysis (bone resorption) can lead to failure of modular total knee replacements and make expensive revision surgery necessary. Gamma-in-air sterilization of the PE insert and having a modular tibial component are both risk …
-
A Wear Minimization Design Investigation of Feedline Splitters, Turning Sections, and Feed Nozzles of a Pneumatic Conveyed Solids System
<p>The adverse effects of wear has continually plagued the operation of the TVA 20 MW Atmospheric Fluidized Bed Combustion Pilot Plant. Wear has caused serious problems in all aspects of the pneumatically fed below-bed coal feed system. This has given rise to the development of high wear resistant …
-
Experimental and Modeling Study of Sliding Wear Performance for Selected Molybdenum Stellite Alloys
… presents an experimental and modeling study of wear performance of molybdenum-containing Stellite alloys. Wear testing conditions are pin-on-disc type using a tungsten carbide ball against the Stellite alloys in dry-sliding mode at ambient temperature. Three variables are explored: (i) two …
-
Wear Of Nanofilled Dental Composites In A Newly-Developed In Vitro Testing Device
Purpose In vivo wear of dental composites can lead to loss of individual tooth function and the need to replace a composite restoration. To evaluate the wear performance of new and existing dental composites, we developed a novel system for measuring in vitro wear and we used this system to analyze …
-
The adhesive wear of modern and traditional engineering coatings
The adhesive wear and frictional characteristics of modern and traditional engineering coatings have been investigated under conditions of constant load and sliding speed. The wear tests were carried out under dry sliding contact using the standard pin-on-disc wear testing equipment. The …
Page 1 of 7