Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 25 for “"wedge test"”.

  1. Determining Interfacial Adhesion Performance and Reliability for Microelectronics Applications Using a Wedge Test Method

    … A series of experiments was conducted using wedge test specimens to investigate the adhesion performance of the systems subjected to a range of environmental conditions. Both silicon and glass systems were relatively insensitive to temperature over a range of 22-60°C, but strongly accelerated …

    vt Repository record for Determining Interfacial Adhesion Performance and Reliability for Microelectronics Applications Using a Wedge Test Method (opens in a new tab)

  2. Environment-assisted subcritical crack growth in CFRP externally bonded concrete systems

    … and the strengthening material be thoroughly tested and understood. It is the intention of this study to further increase the knowledge and understanding of the long-term durability of the concrete/adhesive interface while being exposed to various aggressive environments in such externally …

    alabama Repository record for Environment-assisted subcritical crack growth in CFRP externally bonded concrete systems (opens in a new tab)

  3. Characterization of the Interfacial Fracture of Solvated Semi-Interpenetrating Polymer Network (S-IPN) Silicone Hydrogels with a Cyclo-Olefin Polymer (COP)

    … was collected through the application of the wedge test, a relatively simple test allowing for the measurement of fracture properties over time in environments of interest. In this case, the test was performed at discrete temperatures within range of 4Ë C to 80Ë C. Two COP adherends were …

    vt Repository record for Characterization of the Interfacial Fracture of Solvated Semi-Interpenetrating Polymer Network (S-IPN) Silicone Hydrogels with a Cyclo-Olefin Polymer (COP) (opens in a new tab)

  4. Effect of a derivatized oxide layer and environment on the bond durability of aluminum/polyimide and titanium/polyimide bonds

    … Samples were bonded with LaRC-IA adhesive in a wedge test geometry. Environmental testing consisted of static and cyclical exposure for 240 hours in three atmospheres: 1) 170°C, 2 torr; 2) -20°C; 3) 60°C, 70% relative humidity. Crack propagation arrested within 48 hours. The order of durability …

    vt Repository record for Effect of a derivatized oxide layer and environment on the bond durability of aluminum/polyimide and titanium/polyimide bonds (opens in a new tab)

  5. Accelerated Durability Characterization of Laminated Polycarbonate Systems

    … crack growth in these laminates. The main test utilized is the wedge test, a type of double cantilever beam (DCB) test in which a constant deflection is applied to characterize Mode I fracture behavior. The crack growth in wedge test specimens with different TPUs is evaluated at various …

    vt Repository record for Accelerated Durability Characterization of Laminated Polycarbonate Systems (opens in a new tab)

  6. Materials testing in hypersonic wind tunnels

    … purpose of this investigation was to evaluate a test technique which can be used to provide a test region which duplicates the thermal environment for flight vehicles at supersonic Mach numbers. This technique utilizes a wedge injected into the wind tunnel test section at some nominal angle. The …

    ut-knoxville Repository record for Materials testing in hypersonic wind tunnels (opens in a new tab)

  7. Metal/polymer interactions in polyimide adhesives

    … interface was studied using both the T-peel and wedge tests. In some cases, oxidized sulfur was detected on the failed surfaces via XPS. No apparent effect was observed in the T-peel test, where the T-peel strengths of non-sulfur and sulfur containing polyimides were similar. In the wedge test, …

    vt Repository record for Metal/polymer interactions in polyimide adhesives (opens in a new tab)

  8. Time- and Temperature-Dependence of Fracture Energies Attributed to Copper/Epoxy Bonds

    … the bond when it is broken. Since the 90° peel test has been widely employed in quasi-static fracture testing of film adhesion for printed circuit board applications, this test was first used as a basis to which other test results could be compared. A test fixture was designed and built for …

    vt Repository record for Time- and Temperature-Dependence of Fracture Energies Attributed to Copper/Epoxy Bonds (opens in a new tab)

  9. Friction stir weld development and dynamic crash testing of bumper-beam / crash-box assemblies made from AA66082-T6 and AA6063-T6 extrusions

    … welding (FSW) have enabled the development and testing of a lightweight automotive bumper-beam/crash-box assembly. Previously, a test fixture to dynamically (crash) test the functionality of advanced bumper assemblies fabricated by FSW was developed. This FSW development work included …

    wichita-thes Repository record for Friction stir weld development and dynamic crash testing of bumper-beam / crash-box assemblies made from AA66082-T6 and AA6063-T6 extrusions (opens in a new tab)

  10. Characterization of a Hypersonic Turbulent Boundary Layer Using the VENOM Technique

    … boundary layer above a 2.75 degree half-angle wedge test article. The measurements were performed in the Actively Controlled Expansion (ACE) blow-down wind tunnel under both laminar and turbulent conditions. A double dependent Gaussian fitting velocimetry algorithm was developed to account for …

    tamu Repository record for Characterization of a Hypersonic Turbulent Boundary Layer Using the VENOM Technique (opens in a new tab)

  11. Development and implementation of an alternative method for complete characterization of surface-breaking cracks using ultrasonic Rayleigh waves

    … an alternative to current nondestructive testing (NDT) approaches. Surface cracks are common in many industries, and traditional methods like eddy current testing (ECT) for crack sizing have drawbacks, requiring a complex calibration and highly trained inspectors. ECT also faces challenges …

    ets-quebec Download PDF for Development and implementation of an alternative method for complete characterization of surface-breaking cracks using ultrasonic Rayleigh waves (opens in a new tab)

  12. Water based adhesive primers on aluminum substrates

    … All adhesive bonding was done using the wedge test configuration with a structural epoxy adhesive, Naviloc® XY 0210, which was cured for 30 min. at 180°C. The wedge samples were immersed in 80°C water and crack lengths were monitored as a function of time. Both the initial crack length …

    vt Repository record for Water based adhesive primers on aluminum substrates (opens in a new tab)

  13. Face Sheet/core Debonding In Sandwich Composites Under Static And Fatigue Loading

    … types of delamination experiments, namely T-peel test and wedge test were implemented to evaluate fracture toughness in polyurethane foam core sandwich composites. It is shown that both tests can provide reliable values for mode I fracture toughness. Two analytical solutions for models (double …

    wayne-thes Repository record for Face Sheet/core Debonding In Sandwich Composites Under Static And Fatigue Loading (opens in a new tab)

  14. Durability of adhesive joints between concrete and FRP reinforcement in aggressive environments

    … shear modified free volume model. Torsion tests were conducted and used to calibrate the distortional parameters in the free volume model. Tension experiments were performed at four different temperature and humidity levels and were used to calibrate the dilatational, thermal and hygral …

    texas Repository record for Durability of adhesive joints between concrete and FRP reinforcement in aggressive environments (opens in a new tab)

  15. The Design and Implementation of a Supersonic Indraft Tube Wind Tunnel for the Demonstration of Supersonic Flows

    Historically, the endeavor of scale testing flight vehicles at supersonic Mach numbers, especially for long durations, has required the development of closed-loop wind tunnels, which are extremely expensive both to build and operate due to the high complexity and incredible power required to drive …

    calpoly Repository record for The Design and Implementation of a Supersonic Indraft Tube Wind Tunnel for the Demonstration of Supersonic Flows (opens in a new tab)

  16. Bonded repairs of metallic aircraft structures - Experimental evaluation of surface treatment methods and composite crack repair configurations

    … surface treatments for structural bonding were tested to assess their performance in aluminium, titanium, and stainless-steel epoxy bonding. Cracked aluminium plates were repaired with composite reinforcements to evaluate the effects of repair configuration parameters. The studied surface …

    aalto Repository record for Bonded repairs of metallic aircraft structures - Experimental evaluation of surface treatment methods and composite crack repair configurations (opens in a new tab)

  17. Effect of surface treatment on the mechanical properties of the polysulfone-Al/Li bonded system including thin film studies of moisture intrusion and the viscoelastic response of the interphase region

    … interaction involved single lap shear joints and wedge samples following an FPL etch, sulfuric acid anodization (SAA) and phosphoric acid anodization (PAA). The study of the Al/Li surfaces involved the determination of the elemental composition and morphological features of the pretreated adherend …

    vt Repository record for Effect of surface treatment on the mechanical properties of the polysulfone-Al/Li bonded system including thin film studies of moisture intrusion and the viscoelastic response of the interphase region (opens in a new tab)

  18. Crystallization, Morphology, Thermal Stability and Adhesive Properties of Novel High Performance Semicrystalline Polyimides

    … polyimides. The BPDA based polyimide was also tested extensively as a structural adhesive using Ti-6Al-4V coupons. Additionally, these polyimides are based on monomers, that are presently commercially available. The bulk thermal stability of the polyimides was first evaluated using dynamic and …

    vt Repository record for Crystallization, Morphology, Thermal Stability and Adhesive Properties of Novel High Performance Semicrystalline Polyimides (opens in a new tab)

  19. Evaluating Thermal and Mechanical Properties of Electrically Conductive Adhesives for Electronic Applications

    … evaluated. All the samples for both mechanical tests and thermal tests were aged at 85%, 100%RH for periods of up to 50 days. Studies of bulk conductive adhesives suggested that both plasticization, which is reversible and further crosslinking and thermal degradation, which are irreversible, …

    vt Repository record for Evaluating Thermal and Mechanical Properties of Electrically Conductive Adhesives for Electronic Applications (opens in a new tab)

  20. The Thermal Stability of Anodic Oxide Coatings - Strength and Durability of Adhesively Bonded Ti-6Al-4V Alloy

    … Ti-alloy when exposed to high temperatures. The wedge test configuration was used to investigate the influence of temperature on the bond durability of adhesively bonded chromic acid anodized Ti-6Al-4V alloy in air. Based on the average crack length vs. exposure time data, the bond durability …

    vt Repository record for The Thermal Stability of Anodic Oxide Coatings - Strength and Durability of Adhesively Bonded Ti-6Al-4V Alloy (opens in a new tab)

Page 1 of 2