Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 56 for “"weld strength"”.
-
Effect of Weld Strength Mismatch on Elastic-Plastic Fracture Parameters
This study quantifies the effect of weld strength mismatch on applied J, applied CTOD, and crack-tip constraint for both remote tensile and bending loads. Very detailed elastic-plastic finite element models for a wide range of geometrical configurations and material properties provide the …
-
Interfacial healing and transport phenomena modeling of biopolymers
… of bioplastics joined using ultrasonic welding and modeling of temperature distributions and interfacial healing. Polylactic acid (PLA), which is typically derived from starch-rich crops such as corn, was studied. While the measurement of activation energy for interfacial healing at weld …
-
Friction Bit Joining of Similar Alloy Sheets of High-Strength Aluminum Alloy 7085
… to provide an alternative joining process to welding. As automotive manufacturing has continually pushed toward using dissimilar materials, new joining processes have been needed to replace traditional welding practices that do not perform well when materials are not weld compatible. FBJ meets …
-
Ultrasonic welding of aluminum: a practical study in consistency, part marking and control modes
<p>Patented in 1960, ultrasonic welding for metals, has received significant research and there have been advances in the technology. Because of these advances, the process has been developed into a practical production tool. Although the ultrasonic metal welding has many advantages including …
-
A fundamental study on the structural integrity of magnesium alloys joined by friction stir welding
… of lap-shear joints produced using friction stir welding. This study focuses on understanding the effect of tool geometry and weld process parameters including the tool rotation rate, tool plunge depth and dwell time on the mechanical performance of similar magnesium alloy and dissimilar magnesium …
-
Ultrashort pulsed laser welding of transparent materials to metals /
This work examines the femtosecond pulse laser welding technology designed to join transparent materials, such as fused silica, with metals like stainless steel (type 316). The study focuses on optimizing parameters such as average laser power, welding spot radius, scanning speed, and the number of …
-
Characterization of vibration-welded wood and natural fiber composites
… process and property relationships of vibration-welded wood and natural fiber composites through their characterization. The work was divided into three research focuses according to material type. Firstly, wood (a natural composite of cellulose fiber in a hemicellulose-lignin matrix) weld …
-
Modeling, Analysis, and Verification of a Weld-Breaking Mechanism for Automatic Circuit Recloser Applications
… through the use of a vacuum interrupter and a weld breaking mechanism. Vacuum interrupters consist of two metallic contacts in an air-tight ceramic housing. Due to the electrical interactions that take place during the interruption process, unintended welds are formed between the contacts. …
-
A study of ultrasonic metal welding
Ultrasonic metal welding (USMW) has received significant attention in the past few years, and has become more reliable and suitable for a wide range of applications. In recent years, the technique has been extensively used due to the advent of component miniaturisation and improvements in producing …
-
Behavior Of Fillet Welds In Skewed Joints
Fillet weld connections are very common in steel structures because they are easier and cheaper than other types of welded connections, such as groove welds. Several studies were performed on fillet weld of right dihedral angle, such as T-joints weld, to specify its capacity and failure mechanisms …
-
Process optimization: Ultrasonic welding of coextruded polymer film
… research is to determine the effect of various weld and machine parameters on ultrasonic weld strength. Specifically, welds with six different triple-layer coextruded polyethylene and metallized polypropylene films were examined. These materials were welded in separate experimental studies using …
-
Fundamentals of friction stir spot welding
… and calls for more attention. Friction Stir Spot Welding (FSSW) is an evolving technique that offers several advantages over conventional joining processes. The fundamentals aspects of FSSW are systematically studied in this dissertation. The effects and influence of process inputs (weld …
-
Engineering tools for robust creep modeling
… Such test data sets are even smaller for welded joints that are often the weakest links of structures. It is of considerable interest to be able to reliably predict and extrapolate long term creep behavior from relatively small sets of supporting creep data. For creep strain, the current …
-
Welding mild steel to aluminum and its alloys
… report is concerned with the development of a welding technique to accomplish this.The effects of varying the practical conditions of welding are discussed. The first part of the investigation resulted in the conclusion that a tin, zinc or aluminium coating in the steel provided suitable …
-
Thermal Degradation of PC and PA6 During Laser Transmission Welding (LTW)
In laser transmission welding (LTW), a laser beam passes through the laser-transparent part and is absorbed by carbon black (CB) in the laser-absorbent part. This causes a temperature rise at the interface between the parts which leads to melting, diffusion and ultimately joining of the two …
-
Sealing and cutting of PLA bio-plastic
… acid (PLA a starch derived bioplastic), its weldability and cuttability was studied in detail. Ultrasonic and</p> <p>heat welding, which are two common welding techniques in industrial applications, are examined in terms of weld strength, cycle time, and weld strength consistency. While the …
-
Design of Fillet and PJP Welds in CHS-to-CHS Moment T-Connections: Finite Element Investigation
… property approach in AISC 360-22 for design of welds in circular hollow section (CHS)-to-CHS moment T-connections under in-plane bending. Experimental data from previous full-sized connection tests is used to verify a finite element (FE) modelling approach for weld-critical connections. A …
-
Moisture Sensitivity of PLA/PBS Blends During Ultrasonic Welding and Fused Deposition Modeling
… fused deposition modeling (FDM) and ultrasonic welding (USW) can diminish desired mechanical properties. Sensitivity to moisture is dependent on material properties and environmental factors and needs characterization. In this thesis, moisture sensitivity of PLA filaments and PLA/PBS blended …
Page 1 of 3