Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 33 for “"well interference"”.

  1. Quantifying Well-to-Well Interference Impacts on Production: An Eagle Ford Study

    … drilling and hydraulic fracturing. Infilling wells, or the process of drilling and completing new wells between existing producing wells, has also resulted in increased hydrocarbon recovery. However, infill drilling can result in well-to-well interference, sometimes detectable through …

    tamu Repository record for Quantifying Well-to-Well Interference Impacts on Production: An Eagle Ford Study (opens in a new tab)

  2. Machine Learning Assisted Framework for Advanced Subsurface Fracture Mapping and Well Interference Quantification

    … (e.g., completion design, production, and well spacing optimization), CO2 sequestration in geological formations (e.g., well and reservoir integrity), and engineered geothermal systems (e.g., maximizing the fluid flow and capacity of the wells) is to be able to quantify and map the …

    wvu Repository record for Machine Learning Assisted Framework for Advanced Subsurface Fracture Mapping and Well Interference Quantification (opens in a new tab)

  3. The application of wellbore embedded discrete fracture model (EDFM) in fracture diagnosis through DTS and well interference analysis

    … Enhanced Geothermal System, gas huff-n-puff, well interference analysis, and automatic history matching. But the mechanism of EDFM makes it hard to incorporate a discrete wellbore module into the commercialized simulator, which limits its application in some topics that require detailed …

    texas Repository record for The application of wellbore embedded discrete fracture model (EDFM) in fracture diagnosis through DTS and well interference analysis (opens in a new tab)

  4. Study on Wormhole Coverage, Foamy Oil Phenomenon, and Well Interference of Cold Heavy Oil Production with Sand Wells

    In Cold Heavy Oil Production with Sand (CHOPS) wells, the presence of wormholes is considered to be one of the most important factors that contribute to enhanced production rate. Quantitative detection of wormholes can offer important parameters in further optimization of post-CHOPS processes such …

    regina Repository record for Study on Wormhole Coverage, Foamy Oil Phenomenon, and Well Interference of Cold Heavy Oil Production with Sand Wells (opens in a new tab) Download PDF for Study on Wormhole Coverage, Foamy Oil Phenomenon, and Well Interference of Cold Heavy Oil Production with Sand Wells (opens in a new tab)

  5. NUMERICAL MODELING AND DIAGNOSTICS OF INTER- AND INTRA-WELL INTERFERENCE IN TIGHT OIL RESERVOIRS: TOWARDS OPTIMAL WELL SPACING DECISIONS

    … solutions to the perplexing problem of well interference and its implications on completions design, well-spacing decisions, and ultimately the economics of unconventional reservoirs. Optimal fracture spacing has eluded reservoir and completions engineers since the inception of …

    oklahoma-thes Repository record for NUMERICAL MODELING AND DIAGNOSTICS OF INTER- AND INTRA-WELL INTERFERENCE IN TIGHT OIL RESERVOIRS: TOWARDS OPTIMAL WELL SPACING DECISIONS (opens in a new tab) Restricted access

  6. Workflow development and sensitivity investigation of offset well-to-well interference through 3D fracture modeling and reservoir simulation in the Denver-Julesburg Basin

    … research was to construct a calibrated multi-well 3D fracture model to evaluate well-to-well interference, also known as well “bashing”, in the Niobrara and Codell formations of the Denver-Julesburg (DJ) Basin. Hydraulic fracturing is a vital component to produce in unconventional resource …

    colo-mines Repository record for Workflow development and sensitivity investigation of offset well-to-well interference through 3D fracture modeling and reservoir simulation in the Denver-Julesburg Basin (opens in a new tab)

  7. Modeling interwell fracture interference and Huff-n-Puff pressure containment in Eagle Ford using EDFM

    … tremendous interest in optimal spacing of infill wells and further fracture optimization, which ideally should have as little interference with the existing wells as possible. Although proper modeling has been employed to show the existence of well interference, few models have forecasted the …

    texas Repository record for Modeling interwell fracture interference and Huff-n-Puff pressure containment in Eagle Ford using EDFM (opens in a new tab)

  8. GROUNDWATER RIGHT PROTECTION AND AQUIFER DEVELOPMENT MANAGEMENT: ADMINISTRATIVE APPROACHES IN THE WESTERN UNITED STATES.

    … the cumulative extent of drawdown caused by well interference and establish a maximum allowable rate of static water level decline.

    arizona-thes Repository record for GROUNDWATER RIGHT PROTECTION AND AQUIFER DEVELOPMENT MANAGEMENT: ADMINISTRATIVE APPROACHES IN THE WESTERN UNITED STATES. (opens in a new tab)

  9. Development and Applications of a Fully Implicitly Coupled Wellbore-Reservoir Simulator

    … we develop a compositional multiphase wellbore-reservoir simulator, GURU-MSW. The compositional reservoir simulator GURU serves as the starting point of this work. GURU-MSW fully implicit couples a multi-segment wellbore (MSW) model with the reservoir simulator GURU. Although taking the …

    tamu Repository record for Development and Applications of a Fully Implicitly Coupled Wellbore-Reservoir Simulator (opens in a new tab)

  10. Simulation of dewatering during construction of a bedrock tunnel, Nepean, Ontario.

    … of water for numerous adjacent domestic water wells. The modeling was retrospective and consequently a large amount of data collected during the course of the tunnel project was available for the purpose of model calibration. Actual drawdown levels due to tunnel dewatering resulted in a …

    ottawa-retro Repository record for Simulation of dewatering during construction of a bedrock tunnel, Nepean, Ontario. (opens in a new tab)

  11. Choke management and production optimization in oil and gas fields

    When a well is brought on production, the selection of the optimum choke management strategy should aim towards maximizing well productivity and minimizing the risk of completion or wellbore failures. Until recently, ramp-up practices were based on liquid rate recommendations or empirical …

    texas Repository record for Choke management and production optimization in oil and gas fields (opens in a new tab)

  12. Pressure- and rate-transient model for interfering horizontal wells

    Multiple fractured horizontal wells (MFHW) are extensively used to enhance hydrocarbon production from ultra-tight unconventional reservoirs by increasing surface area for fluid flow. Hydraulic fracturing creates or rejuvenates the existing network of fractures surrounding the hydraulic fractures …

    colo-mines Repository record for Pressure- and rate-transient model for interfering horizontal wells (opens in a new tab)

  13. A data analytics framework for analyzing the effect of frac hits on parent well production

    Well interference, which is commonly referred to as frac hits, has become a significant factor affecting production in fractured horizontal shale wells with the increase in infill drilling in recent years. Today, there is still no clear understanding on how frac hits affect production. This work …

    texas Repository record for A data analytics framework for analyzing the effect of frac hits on parent well production (opens in a new tab)

  14. An integrated assisted history matching and embedded discrete fracture model workflow for well spacing optimization in shale gas reservoirs

    An appropriate well spacing plan is critical for the development of shale reservoirs. The biggest challenge for well spacing optimization is interpreting the subsurface uncertainties associated with hydraulic and natural fractures. However, most studies have calibrated the uncertainties by single …

    texas Repository record for An integrated assisted history matching and embedded discrete fracture model workflow for well spacing optimization in shale gas reservoirs (opens in a new tab)

  15. Tracking impending frac hits using sealed wellbore pressure monitoring in the Eagle Ford and Austin Chalk formations

    … fracturing and field development. Incorrect well placement or a poor treatment design can lead to well-to-well interference, which can negatively impact the productivity of affected wells. Modeling a hydraulic fracturing treatment in a commercial software can help understand the geometry of …

    colo-mines Repository record for Tracking impending frac hits using sealed wellbore pressure monitoring in the Eagle Ford and Austin Chalk formations (opens in a new tab)

  16. Productivity and drainage areas of multiple wells in unconventional reservoirs

    This study investigates the critical aspects of well spacing and hydraulic fracture interactions in unconventional reservoirs, aiming to address challenges that impact optimal hydrocarbon recovery. The research employs numerical models to evaluate the effects of well interference due to production …

    colo-mines Repository record for Productivity and drainage areas of multiple wells in unconventional reservoirs (opens in a new tab)

  17. Exploring the physics of methane-foam generation for gas mobility control in high-temperature, proppant-fractured reservoirs

    … HnP productivity, however, is hampered by well interference and fracture channeling leading to early gas breakthrough and poor areal sweep efficiency. To mitigate these issues and improve conformance control, foam-generating surfactants have been developed as a method of reducing mobility …

    texas Repository record for Exploring the physics of methane-foam generation for gas mobility control in high-temperature, proppant-fractured reservoirs (opens in a new tab)

  18. Optimization of Multiple Wells in Carbon Sequestration

    … compressibility, porosity, salinity and well interference. These are significant because they affect the CO2 storage capacity of the reservoir. The one of the most important criteria to be considered during sequestration is the pressure profile inside the reservoir as the sequestered CO2 …

    waterloo Repository record for Optimization of Multiple Wells in Carbon Sequestration (opens in a new tab)

  19. Production Forecasting of Unconventional Wells in Presence of Stress-Sensitive Permeability Field

    … and reservoir depletion of the unconventional wells, the permeability changes due to decrease in pore pressure and the consequent increase in effective stress. Similarly, conductivity (kfwf) of the hydraulic fractures could also change. The reservoir simulation models used in the industry may …

    tamu Repository record for Production Forecasting of Unconventional Wells in Presence of Stress-Sensitive Permeability Field (opens in a new tab)

Page 1 of 2