Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 114 for “"wide-angle x-ray diffraction"”.

  1. Determination of fiber orientation of composites using wide angle X-ray diffraction

    … Qualitative studies involved the use of x-ray flat-film techniques and scanning electron microscopy (SEM). Quantitative evaluations of fiber orientation as represented by Herman-Stein orientation functions were carried out in extrudate and frozen in situ specimens by means of a wide angle …

    ut-knoxville Repository record for Determination of fiber orientation of composites using wide angle X-ray diffraction (opens in a new tab)

  2. REAL-TIME RAMAN SPECTROSCOPY AND WIDE-ANGLE X-RAY DIFFRACTION DURING SINGLE-LAYER AND MULTI-LAYER BLOWN FILM EXTRUSION

    … Raman spectroscopy; (ii) to conduct real-time wide-angle X-ray diffraction (WAXD) during single-layer blown film extrusion of LDPE to obtain crystallinity and orientation values during the process; and (iii) to investigate the effect of blown film coextrusion on the microstructure of PP/LDPE …

    clemson Repository record for REAL-TIME RAMAN SPECTROSCOPY AND WIDE-ANGLE X-RAY DIFFRACTION DURING SINGLE-LAYER AND MULTI-LAYER BLOWN FILM EXTRUSION (opens in a new tab)

  3. Study of structure development during Melt Spinning of isotactic Polypropylene fibers using Raman Spectroscopy and Wide Angle X-ray Diffraction Simultaneously

    … Isotactic polypropylene (iPP) fibers have a wide variety of applications. Specific end-use applications require specific properties, which are dependent on the polymer morphology produced during processing. Therefore, the final properties of a material are dependent on the processing …

    clemson Repository record for Study of structure development during Melt Spinning of isotactic Polypropylene fibers using Raman Spectroscopy and Wide Angle X-ray Diffraction Simultaneously (opens in a new tab)

  4. The synthesis and development of aromatic polycondensates based on coal derived monomers

    … differential scanning calorimetry, and wide-angle x-ray diffraction.</p><p>Poly(1,12-dodecamethylene-2,2'-diphenamide) was melt spun into fibers using the Instron Capillary Rheometer at 165&deg;C. These fibers had tensile strengths of 8.89 MPa, elongation-to-break of 2.92 percent and …

    ut-knoxville Repository record for The synthesis and development of aromatic polycondensates based on coal derived monomers (opens in a new tab)

  5. Thermal and Morphological Study of Segmented Multiblock Copolyesters Containing 2,2,4,4-Tetramethyl-1,3-cyclobutanediol

    … using differential scanning calorimetry, small angle X-ray scattering, wide angle X-ray diffraction and dynamic mechanical analysis. Molecular origins of the thermal transitions appearing in copolyesters were assigned by the copolyester analysis at different temperatures. The hard segments in …

    vt Repository record for Thermal and Morphological Study of Segmented Multiblock Copolyesters Containing 2,2,4,4-Tetramethyl-1,3-cyclobutanediol (opens in a new tab)

  6. THE EFFECTS OF SOLVENT MIXTURE ON THE THERMAL AND MECHANICAL PROPERTIES OF SOLVENT CAST POLY-LACTIC ACID (PLA) FILM

    … accumulated dimensional changes at 20-100 ¡C. Wide angle x-ray diffraction identified multiple crystalline structures for the PLA-MA. Film barrier properties were also measured. PLA-MA had the lowest oxygen permeability. However, there was no significant difference in water vapor permeability …

    clemson Repository record for THE EFFECTS OF SOLVENT MIXTURE ON THE THERMAL AND MECHANICAL PROPERTIES OF SOLVENT CAST POLY-LACTIC ACID (PLA) FILM (opens in a new tab)

  7. A Study of Crystallization in Bisphenol-A Polycarbonate

    … by differential scanning calorimetry and wide-angle X-ray diffraction varied by over 6 hours because differential scanning calorimetry can detect a smaller amount of crystallinity than wide-angle X-ray diffraction. Signs of pre-ordering in the literature could be a result of experimental …

    vt Repository record for A Study of Crystallization in Bisphenol-A Polycarbonate (opens in a new tab)

  8. Nanoscale characterization of solution-cast poly(vinylidene fluoride) thinfilms using atomic force microscopy

    … changes of PVDF were investigated using both wide angle X-ray diffraction (WAXD) and Fourier Transform Infrared Spectroscopy (FTIR). From this analysis, in-situ corona poling with annealing of spin-cast PVDF enabled a phase change from α to the mixture of β and γ phases. This process …

    tamu Repository record for Nanoscale characterization of solution-cast poly(vinylidene fluoride) thinfilms using atomic force microscopy (opens in a new tab)

  9. Analysis of co-crystallized free phytosterols with triacylglycerols as a functional food ingredient

    … interference contrast microscopy and wide angle x-ray diffraction demonstrated co-crystallization of FPS with FHSO and SO. Polymorphic forms were characterized as β' and β for all samples. The addition of FPS decreased oil loss (OL) and melting profiles of FPS samples were extended to …

    iastate Repository record for Analysis of co-crystallized free phytosterols with triacylglycerols as a functional food ingredient (opens in a new tab)

  10. Structure and properties of rolled isotactic polybutene-1

    … of tensile testing, density measurements, and wide- and small-angle x-ray diffraction analysis.</p> <p>The calculation of the crystal transformation rate from wide-angle x-ray diffraction scans indicated that light rolling at room temperature resulted in severe crystal transformation, but …

    ut-knoxville Repository record for Structure and properties of rolled isotactic polybutene-1 (opens in a new tab)

  11. The solution fabrication and wet spinning of polyamides

    … The fibers were also examined using both small angle and wide angle x-ray diffraction.<p></p>Nylon-6 and Nylon-66 wet spun fibers were crystalline in the &alpha;-forms as-spun. They were very porous fibers with low elongations to breakand low tensile strengths. The porosity of of the fiber …

    ut-knoxville Repository record for The solution fabrication and wet spinning of polyamides (opens in a new tab)

  12. The formation and characterization of biaxially and uniaxially oriented poly (p-Phenylene Terephthalamide) films from liquid crystalline solutions

    … <p>It is shown through mechanical testing and wide angle x-ray diffraction techniques using orientation functions and pole figures that a relatively high level of biaxial orientation is achieved using the mandrel process. The above techniques were also used to characterize extruded and …

    ut-knoxville Repository record for The formation and characterization of biaxially and uniaxially oriented poly (p-Phenylene Terephthalamide) films from liquid crystalline solutions (opens in a new tab)

  13. The effect of additives and melt orientation on the crystallization and Form II-Form I crystal-crystal transformation kinetics of isotactic polybutene-1

    … Structural development was examined by small-angle x-ray (SAXS) and small-angle laser light scattering (SALS) techniques in the BR200S resin.</p> <p>Fibers were melt spun to various spin draw ratios to study the influence of orientation on the kinetics of the Form II-Form I phase …

    ut-knoxville Repository record for The effect of additives and melt orientation on the crystallization and Form II-Form I crystal-crystal transformation kinetics of isotactic polybutene-1 (opens in a new tab)

  14. Structure and organization of cotton cellulose investigated by x-ray diffraction and Fourier transform infrared spectroscopy

    … days post anthesis (DPA) were investigated using Wide angle X-ray Diffraction (WAXD) and Universal Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (UATR-FTIR). The potential use of infrared (IR) crystallinity indices (1429/897 and 1372/2900), integrated intensities of the …

    ttu Repository record for Structure and organization of cotton cellulose investigated by x-ray diffraction and Fourier transform infrared spectroscopy (opens in a new tab)

  15. A rotating annular die for control of biaxial orientation in melt processed thermotropic liquid crystalline cellulose derivatives

    … testing, birefringence measurements, and wide angle x-ray diffraction techniques using pole figures in conjunction with orientation functions show that the molecular orientation can be controlled by the rotating annular die. Tubes and films were characterized at various die rotation …

    ut-knoxville Repository record for A rotating annular die for control of biaxial orientation in melt processed thermotropic liquid crystalline cellulose derivatives (opens in a new tab)

  16. Improving the Exfoliation of Layered Silicate in a Poly(ethylene terephthalate) Matrix Using Supercritical Carbon Dioxide

    … from a traditional melt compounding method. Wide angle x-ray diffraction (WAXD), mechanical testing and rheological analysis were used in order to characterize the silicate morphology, the composite mechanical properties and the relative amount of degradation between the various samples. …

    vt Repository record for Improving the Exfoliation of Layered Silicate in a Poly(ethylene terephthalate) Matrix Using Supercritical Carbon Dioxide (opens in a new tab)

  17. On the Melting and Crystallization of Linear Polyethylene, Poly(ethylene oxide) and Metallocene Linear Low-Density Polyethylene

    … scanning calorimetry, optical microscopy, small angle X-ray scattering, and wide angle X-ray diffraction. In the case of linear polyethylene and poly(ethylene oxide), the zero-entropy production melting temperatures of initial lamellae of isothermally crystallized fractions were analyzed in the …

    vt Repository record for On the Melting and Crystallization of Linear Polyethylene, Poly(ethylene oxide) and Metallocene Linear Low-Density Polyethylene (opens in a new tab)

  18. Structure-Property-Process Studies During Axial Feed Hot Forming and Fracture of Extruded Polypropylene Tubes

    … processes were studied with optical microscopy, wide-angle X-ray diffraction (WAXD) and field emission scanning electron microscope (FE-SEM) techniques. Also, the development of large strains during AF-HOTF of OPP samples were experimentally studied in the form of spatial strain maps, …

    mcmaster Repository record for Structure-Property-Process Studies During Axial Feed Hot Forming and Fracture of Extruded Polypropylene Tubes (opens in a new tab)

  19. The conserved C-terminal domain of spider tubuliform spidroin 1 contributes to extensibility in synthetic fibers

    … but maintained constant toughness. Wide-angle X-ray diffraction studies indicate that post-drawn fibers containing the Cterminal domain of TuSp 1 have more amorphous content when compared to fibers lacking the C-terminus. Taken together, these studies demonstrate that recombinant …

    u-pacific Repository record for The conserved C-terminal domain of spider tubuliform spidroin 1 contributes to extensibility in synthetic fibers (opens in a new tab)

  20. Manufacturing of Poly(vinylidene fluoride) and Evaluation of its Mechanical Properties

    … a phase PVDF powder to b phase as measured with wide-angle x-ray diffraction. This is the first recorded instance of b phase powders forming from the a phase through ball milling. These b phase powders maintained their crystal structure during compression molding at 70°C.

    vt Repository record for Manufacturing of Poly(vinylidene fluoride) and Evaluation of its Mechanical Properties (opens in a new tab)

Page 1 of 6