Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 333 for “"wind tunnels"”.
-
Materials testing in hypersonic wind tunnels
… technique utilizes a wedge injected into the wind tunnel test section at some nominal angle. The wedge produces a shock wave and it is within this area that the flight environment is duplicated. Calculations were performed to establish the correct thermal simulation parameter and what values …
-
Dynamic Force Measurement in Hypersonic Wind Tunnels
… developed and implemented for use in hypersonic wind tunnel testing. The chief application is implementation into Arnold Engineering Development Complex's Hypervelocity Wind Tunnel No. 9. The Sum of Weighted Accelerations Technique, Time Domain Deconvolution Method, and Frequency Domain Inverse …
-
Accurate aeroacoustic measurements in closed-section hard-walled wind tunnels
… aircraft, however aeroacoustic measurements in wind tunnels are still required. There is a growing interest in simultaneous aerodynamic and aeroacoustic measurements in hard-walled closed-section wind tunnels. The research hypothesis of this work is whether accurate aeroacoustic measurements are …
-
Improved Particle Image Velocimetry Methods in Large-Scale Production Wind Tunnels
… image velocimetry (PIV) data collection in wind tunnel testing increases understanding of the model flow field by providing velocity field data, as compared to single-point velocity data produced by traditional measurement approaches. However, using PIV poses challenges for operational …
-
The generation of transverse and longitudinal vortices in low speed wind tunnels
… and transverse vortices in low speed wind tunnels. The longitudinal vortex system is that of a co-rotating vortex pair which, if substituted for a classical single tip vortex, may produce a beneficial modification to Blade Vortex Interaction. The transverse vortex mimics the tip vortex …
-
Dynamic Pressure Improvements to Closed-Circuit Wind Tunnels with Flow Quality Analysis
… against a known standard, usually found through wind tunnel testing. Because wind tunnel testing is usually performed on sub-scale models, flow speeds that span the flight envelope are commonly tested. Traditionally the Texas A&M Engineering Experiment Station Low-Speed Wind Tunnel (LSWT) was …
-
Understanding and Exploiting Wind Tunnels with Porous Flexible Walls for Aerodynamic Measurement
The aerodynamic behavior of wind tunnels with porous, flexible walls formed from tensioned Kevlar has been characterized and new measurement techniques in such wind tunnels explored. The objective is to bring the aerodynamic capabilities of so-called Kevlar-wall test sections in-line with those of …
-
High-fidelity modeling of high-enthalpy plasma wind tunnels for hypersonic testing
… for modeling Inductively Coupled Plasma (ICP) wind tunnels, with a particular focus on the Plasmatron X facility at the University of Illinois Urbana-Champaign. The integrated multi-solver approach enables high-fidelity simulations of plasma behavior within ICP facilities, capturing key aspects …
-
A prototype expert system for diffuser performance evaluation of blowdown type wind tunnels
… of the diffuser section of a blowdown type wind tunnel. The expert system was intended to have two main capabilities; assist the user in understanding the program inputs and assigning correct values to them, then execute the Diffuser Program and provide an interpretation of the diffuser's …
-
Boundary Interference Assessment and Correction for Open Jet Wind Tunnels Using Panel Methods
The presence of nearby boundaries in a wind tunnel can lead to aerodynamic measurements on a model in the wind tunnel that differ from those that would be made when the boundaries of the moving fluid were infinitely far away. The differences, referred to as boundary interference or wall …
-
Calibration of Hot-Film X-Probes for High Accuracy Angle Alignment in Wind Tunnels
… thermal anemometers to align a plate on a wind tunnel at Hill Air Force Base that is used to calibrate Angle of Attack Transmitters on F-16s. A reoccurring problem with this wind tunnel is that no two instruments can verify an angle reading of the the mounting plate for the Angle of Attack …
-
Development of an Acoustic Measurement Capability for Automobile Testing in Open-Jet Wind Tunnels
… are best identified by . performing full-scale wind tunnel testing. This identification can be achieved by deploying a microphone phased array in a suitably configured wind tunnel test section. A microphone phased array permits discrimination of low-level sources in the presence of diffuse …
-
Design and CFD Validation of a Method of Characteristics Code for Supersonic Wind Tunnels
Supersonic wind tunnels are a critically important engineering tool used to make aerodynamic discoveries and technological advancements in the high speed flight regime. Great care must be taken when designing the nozzle for a supersonic wind tunnel, as the quality of data produced throughout the …
-
Theoretical and experimental study of flow-control devices for inlets of indraft wind tunnels
<p>Low-contraction ratio wind tunnel inlets have been shown to generate nonuniform velocity fields in the location where it is necessary to place anti-turbulence screens. The pressure drop experienced by the flow passing through the screens is proportional to the local dynamic pressure and can, …
-
An integral equation method for boundary interference in perforated-wall wind tunnels at transonic speeds
<p>The wind-tunnel boundary interference at transonic speeds on thin airfoils in two-dimensional perforated-wall wind tunnels is determined. The interference is found by applying integral equation methods to the nonlinear. transonic small disturbance equation including embedded supersonic regions …
Page 1 of 17