Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 79 for “"wing structure"”.
-
Folding Solid-Membrane Wing Structure for a Micro Air Vehicle
The design of a solid-membrane folding wing for use on a tube launched micro air vehicle (MAV), and experimental wind tunnel results of the wing integrated on an engineering MAV model are presented herein. Due to the sizing and performance requirements of the MAV, the wing must provide sufficient …
-
Experimental and Computational Analysis of a 3D Printed Wing Structure
… analysis of a topologically optimized wing geometry will serve as a validation tool of the software. Initially, a 3D printed prototype of the wing is validated against static deformation tests as well as dynamic Ground Vibration Tests (GVT). The developed model is compared against the …
-
Stress analysis of the wing structure of a primary glider
Thesis (B.S.)--Michigan State College of Agriculture and Applied Science. Dept. of Civil Engineering, 1941
-
Quasi-Static Structural Analysis of an Experimental Aircraft Wing
… on an experimental light sport aircraft wing via a whiffletree bending test. This report will discuss the loads present on the aircraft during straight level flight at a speed of 82 knots equivalent air speed. Flight load calculations are described along with the design of the whiffletree …
-
On the Space Shuttle Wing Thermal-Structural Analysis
… for efficient thermal-structural analysis of structures with thermal protection systems (TPS) is described. The approach is applied to Space Shuttle wing structure configurations subjected to reentry heating. New two and three-dimensional finite elements are developed to model heat transfer in …
-
Effect of the number of ribs on the aircraft wing gross weight
… distributed ribs along the span of a two spar wing on the wing gross weight. The project is mainly concerned with the preliminary design of an Ultra Light Aircraft (ULA) or Very Light Aircraft (VLA) wing structure, when the structures engineers have no clear conception of the dimensions and …
-
Characterization of Flexible Flapping Wings and the Effects of Solar Cells for Miniature Air Vehicles
Enhancing the performance of Flapping Wing Miniature Air Vehicles (MAVs) requires reducing the weight and total energy loss while increasing the efficiency. This thesis investigates an approach to reduce total energy loss through an energy harvesting technology, flexible solar cells. These cells …
-
EBF3GLWingOpt: A Framework for Multidisciplinary Design Optimization of Wings Using SpaRibs
… optimization of generalized aircraft wing structure has been developed. The concept of curvilinear stiffening members (spars, ribs and stiffeners) has been applied in the optimization of a wing structure. A global wing optimization framework EBF3WingOpt, which integrates the static …
-
Design Optimization of a Composite Wing Box for High-Altitude Long-Endurance Aircraft
… optimization process is developed to define the wing box structure for High-Altitude Long-Endurance Aircraft (HALE). The goal of this study is to determine the best tradeoff between mass and rigidity of a HALE aircraft wing structure. A preliminary composite laminate structural design procedure …
-
Fluid-Structure Interaction Modeling of MAV Flapping-Wing Aerodynamics
This thesis is on computational fluid-structure interaction (FSI) modeling of bioinspired flapping-wing aerodynamics of a micro aerial vehicle (MAV). The wing motion is prescribed partially, based on the high-speed, multi-camera video recordings of an actual locust in a wind tunnel. The rest of the …
-
Buckling, Flutter, and Postbuckling Optimization of Composite Structures
… the design and optimization of a large composite structure. In design of large structural systems, it is customary to divide the problem into many smaller independent/semi-independent local design problems. For example, the wing structure design problem is decomposed into several local panel …
-
Development of an Analysis Tool and Weight Estimation Method for Aircraft Wing Structures
… was to build an analysis tool for aircraft wings and incorporate it into a program that optimizes the wing structure for the lowest weight for the conceptual design phase. The analysis tool calculates the internal stresses in primary load carrying members using established analysis methods …
-
Dynamics and control of a flapping wing aircraft
… flying for more than 8 minutes. New types of wings like the spring wings have been designed while different flapping mechanisms have also been analyzed to improve the performance of the RC-EPO. Moreover, a computer program based on Delauriera??s flapping wing model has been written to simulate …
-
Structural Design, Modeling, And Analysis Of The Wing For A World Speed Record-Breaking Turbo-Prop Racing Airplane
… structural design, modeling, and analysis of the wing of Cal Poly SLO TP Racer. Methodology behind analyzing the wing is presented through finite element modeling elements and a mesh study. This is followed by development of structure through geometry and laminate estimations. The wing structure …
-
Effect of Compressive Force on Aeroelastic Stability of a Strut-Braced Wing
Recent investigations of a strut-braced wing (SBW) aircraft show that, at high positive load factors, a large tensile force in the strut leads to a considerable compressive axial force in the inner wing, resulting in a reduced bending stiffness and even buckling of the wing. Studying the influence …
-
Conceptual level FEM based wing weight estimation
… FEM based weight estimation to aircraft wing structure.
-
STRESS ANALYSIS OF COMPOSITE AIRCRAFT WING STRUCTURES UNDER DIFFERENT OPERATING CONDITIONS
… the structural behavior of a composite aircraft wing under operational conditions using a one-way fluid-structure interaction simulation. This research focuses on the responses of stresses and strains during takeoff, landing, and steady flight conditions. The wing structure, modeled using a …
-
Untapped Air Force resources for stabilization and reconstruction operations
… possible use in post-conflict operations by reviewing the Air Force's Objective Wing Structure and duty histories of current and former Mission Support Group Commanders.
-
Structural and Aerodynamic Interaction Computational Tool for Highly Reconfigurable Wings
… of the aerospace industry, and a reconfigurable wing is a significant element of a morphing aircraft. This thesis develops two tools for analyzing wing configurations with multiple geometric degrees-of-freedom: the structural tool and the aerodynamic and structural interaction tool. Linear Space …
-
A computational model for flexible wing based micro air vehicles
Due to the complexities of the wing structure of a micro air vehicle, MAV, a computational model of the aircraft wing requires a combination of many structural elements. The wing typically consists of a flexible membrane material braced with a leading edge spar and chordwise battens. The structural …
Page 1 of 4