Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 120 for “"wing-body"”.
-
Aerodynamics of variable geometry wing/body combinations
… intervals. All the pressure distributions on the wing, glove, and body are recorded for each wind tunnel test. Aerodynamic forces and moments were also taken through a balance mechanism system which is attached to the model. This is connected to an independent computer terminal and a Teletype …
-
Aerodynamic and Acoustic Characteristics of Wing-Body Junction Flows
… flow that forms in the junction region between a wing and a wall is associated with a horseshoe vortex (HSV) structure, potential trailing edge (TE) flow separation and low-frequency flow-induced noise. To characterize the turbulent junction flow as well as the unsteady loading and the …
-
Wall Features of Wing-Body Junctions: Towards Noise Reduction
… experiments have gone into studying idealized wing-body junction flows and their impact on horseshoe vortex and wake formation. The vortices have been found to generate regions of high surface pressure fluctuations and turbulence that are detrimental to structural components and acoustics. With …
-
Understanding Unsteady Corner Separation Within Wing-Body Junction Flows
Wing-body junction flows, formed at the interface between a wing and fuselage surface, are a complex, coupled, three-dimensional, turbulent flow field. This thesis focused on the unsteady corner separation that develops at the trailing edge of this wing-body junction under certain conditions. A …
-
Multidisciplinary Shape Optimization of A Composite Blended Wing Body Aircraft
… fluid dynamics analysis tools and a structural wing weight tool, coupled based on the multidisciplinary feasible optimization architecture; aircraft geometry is modified in the optimization of the aircraft’s range or endurance. The developed tool is applied to three geometries: a hybrid blended …
-
Data-driven aero-elastic modeling of flexible blended-wing-body aircraft
… like the BWB feature high-aspect-ratio wings prone to aeroelastic instabilities, there is an increasing need for real-time, constraint-aware flutter suppression methods. Traditional empirical and analytical techniques often struggle to capture time-varying dynamics near flutter speed. …
-
Wake measurements and flow visualization of a blended-wing-body-model
… have resulted in the design of a novel Blended Wing Body (BWB) aircraft. The BWB provides promise for noise reduction through shielding as well as techniques such as boundary layer ingestion (BLI) engine inlets and distributed propulsion. The purpose of this study was to depict the wake and flow …
-
Nonlinear steady and unsteady aerodynamics of wings and wing-body-combinations
… unsteady incompressible flow over delta wings. Symmetric motions (pitching, heaving) and asymmetric motions (roll, yaw) are considered. Then the method is generalized to treat the nonlinear three-dimensional steady flow for bodies and wing body combinations. Numerical examples include …
-
Control Power Optimization using Artificial Intelligence for Hybrid Wing Body Aircraft
… allocation optimization problem of Hybrid Wing Body (HWB) aircraft concepts for minimizing control power, hinge moments, and actuator forces, while keeping the system weights within acceptable limits. The main objective is to develop a proof-of-concept process suitable to demonstrate the …
-
The effect of a fillet on a wing/body junction flow
Time-averaged properties of a wing-body-junction flow surrounding a cylindrical wing with a 1.5:1 elliptical nose and a NACA 0020 tail have been compared to those for the above wing with a 1.5 inch radius fillet normal to the wing's surface. An attempt was made to determine the effectiveness of the …
-
Multi-fidelity analysis and reduced-order modeling of wing-body aerodynamics
Submission original under an indefinite embargo labeled 'Open Access'. The submission was exported from vireo on 2024-03-01 without embargo terms
-
Vibration control and gust alleviation of highly flexible blended-wing-body aircraft
… large deformations in the flexible, lightweight wings. These disturbances can potentially excite unstable modes within the flexible aircraft, depending on the flight speed and gust strength. In this thesis the open-loop and closed-loop dynamic responses of a blended-wing-body aircraft subjected …
-
Wing body interference for sweptback wings with special reference to pitching moment
… of this paper is to investigate the effect of wing/body interference on the aerodynamic centre position of a family of wing/body combinations. The combinations cover a range of aspect ratios from 2 to 5 and angles of sweepback from 0
-
The lift distribution and the lift curve slope for wing/body combinations
… calculating the spanwise load distribution on wing/body combinations. From the load distribution, values are then obtained for the lift curve slope. The most versatile method for solving this problem appears to be that proposed by Multhopp, and it is here described in detail, together with …
-
An experimental study of a turbulent wing-body junction and wake flow
… in an incompressible turbulent flow around a wing-body junction. The measurements were performed adjacent to the body and up to 11.56 chord lengths downstream of the body. The junction wake flow entered an adverse pressure gradient region approximately 6 chord lengths downstream. This region's …
-
The Multidisciplinary Design Optimization of a Distributed Propulsion Blended-Wing-Body Aircraft
… (MDO) of a distributed propulsion blended-wing-body (BWB) aircraft. The BWB is a hybrid shape resembling a flying wing, placing the payload in the inboard sections of the wing. The distributed propulsion concept involves replacing a small number of large engines with many smaller engines. …
-
Skin friction measurements around a wing-body junction using oil- film laser interferometry
… to measure the skin friction around a wing-body junction in a three-dimensional, turbulent boundary layer with pressure gradients. The flow was dominated by the formation of a junction vortex generated at the nose of the wing-body. The oil-film skin friction results were compared with …
Page 1 of 6