Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 32 for “"wire electrode"”.

  1. Amperometric Titrations Using a Rotating Platinum-wire Electrode

    … too turbid. My choice of using the platinum microelectrode in these titrations was based on the fact that this electrode could be easily assembled, and take little effort to maintain. It also is advantageous because reported results with this type of electrode can easily be duplicated by some …

    marquette Repository record for Amperometric Titrations Using a Rotating Platinum-wire Electrode (opens in a new tab)

  2. Time domain and frequency domain analysis of myoelectric signals during muscle fatigue

    … and deltoids. In addition, a monopolar fine wire electrode referenced to a surface electrode was compared with a bipolar surface electrode and bipolar fine wire electrodes in order to test the monopolar fine wire electrode as a technique to measure fatigue. The result showed that the …

    njit Repository record for Time domain and frequency domain analysis of myoelectric signals during muscle fatigue (opens in a new tab)

  3. Machine Learning Based Monitoring of Contact Tip Wear for Wire Arc Additive Manufacturing

    Wire arc additive manufacturing (WAAM) is a relatively recent field of additive manufacturing that achieves layer by layer deposition of a part geometry with commercially available welders and a motion platform. Due to the complexity of the welding process, process monitoring and control schemes …

    gatech Repository record for Machine Learning Based Monitoring of Contact Tip Wear for Wire Arc Additive Manufacturing (opens in a new tab)

  4. Influência da corrente de pulso, do tempo de pulso e diâmetro de gota sobre a estabilidade da transferência metálica no processo MIG-P

    … diameters: drop with the same diameter of the wire electrode; droplet diameter larger drop smaller than the diameter of the wire electrode. For purposes of comparison the same was determined relation between the average current and welding speed was determined generating a constant (Im / Vs = …

    brazil-ufrn Repository record for Influência da corrente de pulso, do tempo de pulso e diâmetro de gota sobre a estabilidade da transferência metálica no processo MIG-P (opens in a new tab)

  5. ENHANCEMENT OF CONVECTIVE HEAT TRANSFER IN INTERNAL FLOWS USING AN ELECTRICALLY-INDUCED CORONA JET

    … the plasma region and move toward the grounded electrode. The accelerating ions collide with neutral particles of the surrounding gas and impose a dragging effect which is interpreted as a body-force to the air particles. The shape and configuration of the emitting and receiving electrodes has a …

    siu-theses Repository record for ENHANCEMENT OF CONVECTIVE HEAT TRANSFER IN INTERNAL FLOWS USING AN ELECTRICALLY-INDUCED CORONA JET (opens in a new tab)

  6. Development of line-imaging Raman spectroscopy for use with electrochemical systems

    … imaging line. Specifically studied was an electrodeposited thin film of CuSCN for possible use in solar cell applications, copper plating as a model electrodeposition system, and nickel hexacyanoferrate derivatized electrodes for possible applications as an electrically controlled cation …

    washington Repository record for Development of line-imaging Raman spectroscopy for use with electrochemical systems (opens in a new tab)

  7. Optimization of Wire Diameter for Maximizing Removal Rate in Wire Electrical Discharge Machining

    Wire electrical discharge machining (WEDM) is a precision machining process that uses electrical discharges struck between an axially moving wire electrode and the workpiece to remove material through melting and vaporization. WEDM is replacing traditional processes like broaching for machining …

    mcmaster Repository record for Optimization of Wire Diameter for Maximizing Removal Rate in Wire Electrical Discharge Machining (opens in a new tab)

  8. Development of high performance microbiosensors based on oxidases for in-vivo monitoring

    … have been developed. A platinum/iridium (9/1) wire electrode (o.d. of 0.178 mm, sensing area of 1.12 square millimeters is modified with (3-mercaptopropyl)trimethoxysilane employing self-assembly and electropolymerization to achieve a permselectivity for hydrogen peroxide over endogenous …

    ku Repository record for Development of high performance microbiosensors based on oxidases for in-vivo monitoring (opens in a new tab)

  9. Investigations of resonantly enhanced multiphoton ionizations of atomic mercury and potassium

    … Ionization was detected by a voltage biased wire electrode that simply collected the photoelectrons either directly or after some gas multiplication. One investigation was the measurement of the dependence of RMPI processes in mercury on the polarization of the incident light for comparisons …

    ubc Repository record for Investigations of resonantly enhanced multiphoton ionizations of atomic mercury and potassium (opens in a new tab) Download PDF for Investigations of resonantly enhanced multiphoton ionizations of atomic mercury and potassium (opens in a new tab)

  10. Enhanced Biomolecular Binding to Beads on a Digital Microfluidic Device

    … to compare passive mixing, active mixing on electrode arrays and local bead actuation on an integrated current-wire electrode, whereby current is sequenced through copper wires fabricated on the electrode to generate magnetic-fields on-chip that cause the magnetic beads in the assay to move …

    duke Repository record for Enhanced Biomolecular Binding to Beads on a Digital Microfluidic Device (opens in a new tab)

  11. Investigation of the effect of process parameters on the formation of recast layer in wire-EDM of Inconel 718

    … The non-traditional manufacturing process of wire-electrical discharge machining (EDM) possesses many advantages over traditional machining during the manufacture of Inconel 718 parts. However, certain detrimental effects are also present. The top layer of the machined surface is melted and …

    gatech Repository record for Investigation of the effect of process parameters on the formation of recast layer in wire-EDM of Inconel 718 (opens in a new tab)

  12. A review of optical diagnostic techniques used to identify uranium spectral signatures

    … investigated including exploding brass bridgewires, graphite electrode sparks containing powders, uranium wire electrode sparks, and ignition of various metal powders to generate burning dust clouds. High-speed images of two out of the three excitation methods are reported. Additionally, the …

    uiuc Repository record for A review of optical diagnostic techniques used to identify uranium spectral signatures (opens in a new tab)

  13. Biomechanical model of the shoulder joint

    … activities. Both surface and intra-muscular fine wire electrode techniques were used. Eight muscles including infraspinatus, subscapularis and supraspinatus were instrumented. The resulting EMG data was normalized and averaged for each activity. Muscle activation appears in good agreement with …

    strathclyde Repository record for Biomechanical model of the shoulder joint (opens in a new tab)

  14. Photoelectrochemical imaging of gold nanoparticles by light-activated electrochemistry

    … (LAE) on Si was developed as a single-wire electrode array where a light pointer created localized conductive channels on a monolithic monolayer-terminated Si electrode and allowed undertaking spatially-resolved faradaic electrochemistry on the surface of Si electrode at desired …

    unsw Repository record for Photoelectrochemical imaging of gold nanoparticles by light-activated electrochemistry (opens in a new tab)

  15. Modified Hydrogel Matrices in Fibre Optic Sensors

    … of the most successful membrane, on a coated wire electrode and also on the fibre optic test bed, in a series of test environments, indicated that the reagent was possibly acting as an ion exchanger and hence having a major influence on transport and therefore sensor characteristics.

    aston Repository record for Modified Hydrogel Matrices in Fibre Optic Sensors (opens in a new tab) Download PDF for Modified Hydrogel Matrices in Fibre Optic Sensors (opens in a new tab)

  16. Transparent and conductive gallium oxide electrode for simultaneous recording and optogenetic stimulation

    Neural electrode technology has been around for centuries since the times of Galvani. In early electrophysiology experiments metal wires were used to induce contractions in dissected animals. The metal wire electrode has since been a standard tool to both stimulate and record neural activity. In …

    wvu Repository record for Transparent and conductive gallium oxide electrode for simultaneous recording and optogenetic stimulation (opens in a new tab)

  17. Effects of Heatshock on the Na+/K+-ATPase in Locusta migratoria

    … and absence of anoxic coma by placing a copper wire electrode on ventilatory muscles 161 or 173 in control and HS-preconditioned animals. In addition, I studied the enzymatic activity of the Na+/K+-ATPase using a pyruvate kinase/lactate dehydrogenase assay and the localization of the …

    queens Repository record for Effects of Heatshock on the Na+/K+-ATPase in Locusta migratoria (opens in a new tab)

  18. Electrical discharge machining (EDM) of CFRP composites

    … details research to evaluate the feasibility of wire electrical discharge machining (WEDM) as an alternative to conventional cutting (milling/routing/slotting) of carbon fibre reinforced plastic (CFRP) composites. A comprehensive literature review of various nonconventional machining processes …

    birmingham Download PDF for Electrical discharge machining (EDM) of CFRP composites (opens in a new tab)

Page 1 of 2