Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 13 of 13 for “"wire tension"”.

  1. A wireless sensor system for the training of hammer throwers

    … a real-time biomechanical feedback device – a wireless sensor system – to help the training of hammer-throw. The system includes two sensors – an infrared proximity sensor for tracing the hip vertical movement and a load cell for recording the wire tension during a hammer-throw. The system uses …

    lethbridge Repository record for A wireless sensor system for the training of hammer throwers (opens in a new tab)

  2. Support of guyed transmission tower, using self-adjusting sprung guy wires

    … is that excessive heave can cause loss of guy wires or buckling of tower shafts and excessive settlement allows lateral leaning of the towers. The tower of interest in this thesis is the latticed tower of Manitoba Hydro designated as A-203. The objective of this thesis project is to design a …

    manitoba Repository record for Support of guyed transmission tower, using self-adjusting sprung guy wires (opens in a new tab)

  3. Numerical investigation of ROV deployment onboard a small offshore service vessel for offshore wind farm O&M

    … offshore renewable energy sector. However, the tension spike in wire, also known as snap load, often occurs when the ROV passes through the wave zone in launching and lifting operation of deployment. This study developed a coupled numerical model of ROV deployment onboard a small OSV positioned …

    strathclyde Repository record for Numerical investigation of ROV deployment onboard a small offshore service vessel for offshore wind farm O&M (opens in a new tab)

  4. Design, Development and Study of Optimal Parameters of a Micro Wire Electrical Discharge Machining (WEDM) Device

    Micro wire electro discharge machining (muWEDM) is a specialized thermal machining process which has increasing application in various fields. Under this research a fully functional muWEDM device was designed and developed as an interchangeable part of the already developed multi-process capable …

    nus Repository record for Design, Development and Study of Optimal Parameters of a Micro Wire Electrical Discharge Machining (WEDM) Device (opens in a new tab) Download file for Design, Development and Study of Optimal Parameters of a Micro Wire Electrical Discharge Machining (WEDM) Device (opens in a new tab)

  5. Designing a braided bioabsorbable magnesium metal stent

    … profile. The mechanical properties of WE22 wires were first characterized through tensile testing to ensure sufficient strength and flexibility for stent braiding and deployment. The testing informed process parameters such as wire drawing and annealing, achieving an optimal balance between …

    bu Repository record for Designing a braided bioabsorbable magnesium metal stent (opens in a new tab)

  6. A study of the stud-welded vibrating wire strain gage

    … affect the stability of a stud-welded vibrating wire strain gage. The lack of previously published information and the nature of the instrument required an origonal design. When undesirable conditions were noted, an attempt has been made to eliminate such conditions through a change in design of …

    rice Repository record for A study of the stud-welded vibrating wire strain gage (opens in a new tab)

  7. The effect of nitrogen and oxygen on the mechanical properties of molybdenum

    … (>100 at.ppm) may be quenched into solution in wire tension specimens., The nitrogen doped molybdenum is more thoroughly characterised than the oxygen doped molybdenum.</p> <p>[Abstract continued in thesis]</p>

    oxford Repository record for The effect of nitrogen and oxygen on the mechanical properties of molybdenum (opens in a new tab)

  8. The investigation into the mechanics and inducement of residual torsion within the beadwire production process

    … project was initiated to investigate the Beadwire final processing and control, to reduce the effects of residual torsion (axial twist) and identify the influences of various elements within the process which affect the quality of the wire, so enabling improved control on product variability …

    aston Repository record for The investigation into the mechanics and inducement of residual torsion within the beadwire production process (opens in a new tab) Download PDF for The investigation into the mechanics and inducement of residual torsion within the beadwire production process (opens in a new tab)

  9. Advanced Fog Harvesting Techniques

    … 2 proposes the development of large-scale, high-tension Fog Harps as a solution to the limitations of existing fog harvesting systems. While Fog Harps have been shown to collect significantly more water than traditional mesh-based harvesters, previous large-scale versions have relied on …

    vt Repository record for Advanced Fog Harvesting Techniques (opens in a new tab)

  10. Workspace Generation for Wire-Actuated Parallel Manipulators

    … and results of the workspace formulation of wire-actuated parallel manipulators. Four methods of workspace generation are studied. The null space method, based on the calculation of wire tensions, is used to formulate the workspaces of example manipulators. The results of this method are used …

    queens Repository record for Workspace Generation for Wire-Actuated Parallel Manipulators (opens in a new tab)

  11. Mechanical Assessment of Veterinary Orthopedic Implant Technologies: Comparative Studies of Canine Fracture Fixation and Equine Arthrodesis Devices and Techniques

    … used a two “figure-eight” 1.25mm stainless steel wire tension band. Fatigue tests and to failure tests were conducted. There were no significant differences in stiffness between groups for fatigue tests. Stiffness increased after the first fatigue cycle for the LCP/wire (80.56+/-52.22%) and …

    tamu Repository record for Mechanical Assessment of Veterinary Orthopedic Implant Technologies: Comparative Studies of Canine Fracture Fixation and Equine Arthrodesis Devices and Techniques (opens in a new tab)

  12. An electrical analysis of an electrostatic precipitator with emphasis on stability

    … special regard to the stability of the ionizer wires. The basic problem was to study why the ionizer wires vibrated. This unstable condition could lead to arc-over from the wire to the precipitator ground plate and consequently could cause possible power supply damage or wire damage.</p><p>The …

    ut-knoxville Repository record for An electrical analysis of an electrostatic precipitator with emphasis on stability (opens in a new tab)