Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 46 for “"wire-drawing"”.

  1. Simulation and Optimization of Wire Drawing

    <p>A study of the production Iine process of wire manufacturing was made and a mathematical model of some aspects of the physical process then constructed. Using this model a computer program was written to simulate the process and hence predict the statistical distribution of wire strength. …

    mcmaster Repository record for Simulation and Optimization of Wire Drawing (opens in a new tab)

  2. Modelling and control of dieless wire drawing.

    <p>A novel technique of drawing wire, i.e., dieless wire drawing, is described in which no conventional reduction dies are used. The wire is passed through a unit having stepped parallel bores filled with polymer melts, the smallest bore diameter being greater than the initial nominal wire …

    sheffield-hallam Download file for Modelling and control of dieless wire drawing. (opens in a new tab)

  3. Lubrication efficiency and die design in wire drawing

    … up is a matter of survival. One way in which wire manufacturers can meet this challenge is to possess a thorough understanding of deformation, friction and lubrication during the wire drawing process, and therefore to make good decisions regarding the selection and application of lubricants as …

    aston Download PDF for Lubrication efficiency and die design in wire drawing (opens in a new tab)

  4. Optimisation of plastohydrodynamic system of wire drawing using polymer melts.

    A feasibility study carried out on the wire drawing system consisting of a reduction die preceded by a pressure tube and polymer melt lubrication, led to the introduction of the die-less wire drawing process. The conventional reduction die is altogether replaced by a die-less unit of stepped bore …

    sheffield-hallam Download PDF for Optimisation of plastohydrodynamic system of wire drawing using polymer melts. (opens in a new tab)

  5. An investigation of the mechanics of wire drawing with the superposition of an oscillatory drawing stress

    … aid metal forming with particular reference to wire drawing. The remainder of the thesis discusses the research undertaken to study the effect of applying longitudinal oscillations to wire drawing. Oscillations were supplied from an electric hydraulic vibrator at frequencies in the range 25 to …

    aston Download PDF for An investigation of the mechanics of wire drawing with the superposition of an oscillatory drawing stress (opens in a new tab)

  6. Plasto-hydrodynamic investigation of the lubrication and coating of wire using a polymer melt during drawing.

    Wire drawing has been the subject of much research and development but there is evidence that conventional methods of lubrication may have reached the limit of development, This project investigates the advantages and problems of lubricating the wire drawing operation hydrodynamically using a …

    sheffield-hallam Download PDF for Plasto-hydrodynamic investigation of the lubrication and coating of wire using a polymer melt during drawing. (opens in a new tab)

  7. Investigation and analysis of the pre-straightening influences in AISI 1045 steel drawn bars

    … between the tool and the workpiece, as well as wire drawing parameters like reducing and die angle, influence the residual stresses induced in the final product. Numerical simulation is a resourceful tool to evaluate the level of influence of each parameter involved in the process: it does not …

    brazil-ufrgs Repository record for Investigation and analysis of the pre-straightening influences in AISI 1045 steel drawn bars (opens in a new tab)

  8. Influência do processamento termomecânico em ciclos de deformação por trefilação e solubilização no desenvolvimento da mesotextura e nas propriedades mecânicas na superliga de níquel 718

    … an iterative thermomechanical route using wire-drawing and annealing heat treatment and verify if it is possible to achieve a CSL microstructure. For this goal, four routes were proposed with the same strain level followed by sub-solvus  and super-solvus  annealing heat treatment. The …

    brazil-uerj Repository record for Influência do processamento termomecânico em ciclos de deformação por trefilação e solubilização no desenvolvimento da mesotextura e nas propriedades mecânicas na superliga de níquel 718 (opens in a new tab)

  9. Microstructure-strength relationship of a deformation-processed aluminum-magnesium composite

    … deformation processed by extrusion, swaging and wire drawing. Two compositions, Al-13vol%Mg and Al-20vol%Mg were used to compare the influence of second phase content. The microstructure of the composites was convoluted, ribbon-shaped second phase Mg filaments in Al matrix, which resulted from …

    iastate Repository record for Microstructure-strength relationship of a deformation-processed aluminum-magnesium composite (opens in a new tab)

  10. Investigating Scalable Manufacturing of High-Conductivity Wires and Coatings From Ultra-Long Carbon Nanotubes

    … mechanical and electrical properties. Wires and coatings from ultralong nanotubes that are highly crystalline, well-aligned and densely packed can achieve this goal. High-performance CNT conductors will be relatively lightweight and resistant to harsh conditions and therefore can …

    unm Repository record for Investigating Scalable Manufacturing of High-Conductivity Wires and Coatings From Ultra-Long Carbon Nanotubes (opens in a new tab)

  11. A Study of the Application of Low Frequency Oscillations to Multi-Tool Drawing Processes

    … ‘axial vibrations (O to 100 Hz) to the tandem wire and fixed plug tube drawing processes. The investigation was conducted on a 2000 lbf horizontal bull block, the tools being oscillated by two electrohydraulic vibrators, Mild steel wire and medium carbon steel tube were selected for the …

    aston Download PDF for A Study of the Application of Low Frequency Oscillations to Multi-Tool Drawing Processes (opens in a new tab)

  12. Computer integrated manufacture of complex dies for drawing n-circular wires.

    … is based on the idea of machining complex wire drawing die configurations that require drastically different shapes on the top and bottom die faces, by manipulating the workpiece at a minimum of four axes. A prototype rig motivated by four stepper motors and controlled by a micro-computer …

    sheffield-hallam Download PDF for Computer integrated manufacture of complex dies for drawing n-circular wires. (opens in a new tab)

  13. Study of viscous flow during thin film polymer coating and drawing of continuum

    … and experimental thin polymer coating on wire as well as drawing of wire by hydrodynamic pressure technique. Hydrodynamic pressure technique is a relatively new and innovative technique for wire drawing and thin polymer coating. The wire submerged in polymer melt inside the pressure unit …

    dcu Download PDF for Study of viscous flow during thin film polymer coating and drawing of continuum (opens in a new tab)

  14. Designing a braided bioabsorbable magnesium metal stent

    … profile. The mechanical properties of WE22 wires were first characterized through tensile testing to ensure sufficient strength and flexibility for stent braiding and deployment. The testing informed process parameters such as wire drawing and annealing, achieving an optimal balance between …

    bu Repository record for Designing a braided bioabsorbable magnesium metal stent (opens in a new tab)

  15. Stucture and thermomechanical behavior of nitipt shape memory alloy wires

    … compared to experiments on Ni-rich NiTi alloy wires (Ti-51.0 at% Ni), which are in commercial use in various biomedical applications. With regards to microstructure, both alloys exhibit a <111> fiber texture along the wire drawing axis, however the NiTiPt alloy's grain size is smaller than that …

    gatech Repository record for Stucture and thermomechanical behavior of nitipt shape memory alloy wires (opens in a new tab)

  16. Micro-structural relationships of heavily deformed gold-silver and gold-platinum composites

    … deformation processed by swaging and subsequent wire drawing. Four compositions, Au-7vol.%Ag, Au-14vol.%Ag, Au-7vol.%Pt, Au-14vol.Pt, were investigated. After extensive cold reduction, the particles of the second phase were reduced in size and aligned parallel to the wire axis. The second phase …

    iastate Repository record for Micro-structural relationships of heavily deformed gold-silver and gold-platinum composites (opens in a new tab)

  17. Electric resistivity testing for medical magnesium wires

    … X-ray contrast. For potential metallic textiles, wire meshes, bone cages, and stents, fine wires with diameters up to 50 μm are needed. The wire is tapered by cold wire drawing on the die by approximately 20% per drawing step. The drawing stress measurement is in good agreement with theoretical …

    cau-kiel Repository record for Electric resistivity testing for medical magnesium wires (opens in a new tab)

Page 1 of 3