Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 11 of 11 for “"wirebond"”.
-
Thermal Analysis, Parasitic Extraction, and Wirebond Reliability Studies of Power Electronic Modules
… thermal performance, parasitic extraction and wirebond/encapsulation reliability of power electronic modules. Thermal performance is critical to the power electronic modules. As such, thermal analysis is an important part of the power electronic module design process. Several cases are studied …
-
EFFECT OF ENCAPSULANT ON HIGH-TEMPERATURE RELIABILITY OF THE GOLD WIREBOND ALUMINUM BONDPAD INTERFACE
… first level interconnect in PEMs is the gold wirebond aluminum bondpad interface. This interface has been found to have a very limited life at temperatures above 180 °C, due to intermetallic formation and subsequent corrosion. The corrosion is caused by brominated flame retardants and antimony …
-
Fabrication Refinements of Advanced Packaging Techniques for Medium-Voltage Wirebond-less Multi-Chip Power Modules
… power electronic applications. Low-inductance, wirebond-less, high-density, scalable modules are possible due to advanced packaging methods. While beneficial to the operation and design, these techniques introduce new challenges to the fabrication process. This requires refinement to improve the …
-
Design and Development of High Density High Temperature Power Module with Cooling System
… In this dissertation, a high temperature wirebond package for multi-chip phase-leg power module using SiC devices was designed, developed, fabricated and tested. The details of the material selection and thermo-mechanical reliability evaluation are described. High temperature power test …
-
Electromagnetic Modeling of Packaging Layout in Power Electronic Modules
… three packaging technologies: (i) the wirebond technology, (ii) The Metal Post Interconnected Parallel Plate Structure, and the (iii) Multi Layer Structure. The model developed is validated through experimentation. These models are then used in simulation in order to compare the …
-
Reduced order modelling and numerical optimisation approach to reliability analysis of microsystems and power modules
… predicting the reliability and robustness of a wirebond interconnect structure that is subjected to electro-thermo-mechanical loads. The design variables investigated in this study included wire-loop ratio, current in the wire, and thickness of the silicon die each represented as input variables …
-
Warpage Evaluation of Double-Side Cooled Power Modules with Ceramic Stiffeners
… and rigid encapsulant modules experienced wirebond failures. The results demonstrate that module rigidity can be used as a controllable design parameter to influence warpage behavior, thermal interface performance, and thermo-mechanical reliability in high power density DSC power modules.
-
Optimization of Bonding Geometry for a Planar Power Module to Minimize Thermal Impedance and Thermo-Mechanical Stress
… the conventional single-sided power module with wirebond connection cannot achieve both good steady-state and transient thermal performance under high heat transfer coefficient conditions. As a result, a plate-bonded planar power module was designed to resolve the issue. The comparison of thermal …
-
Lifetime Estimation of IGBTs in a Grid-connected STATCOM
<p>Lifetime estimation of power semiconductor devices, and IGBT devices in particular, used in the power electronics integrated with power systems has gained technical importance in recent times with increased scope of distributed generation, renewable energy systems and FACTS. Since most of the …
-
Embedded Magnetics For Power System On Chip (psoc)
A novel concept of on-chip bondwire inductors and transformers with ferrite epoxy glob coating is proposed, offering a cost effective approach to realize power systems on chip (PSoC) or System-in-Package (PSiP). The concept has been investigated both experimentally and with finite element modeling. …
-
Processing and Reliability Assessment of Solder Joint Interconnection for Power Chips
… of power chips is accomplished with wirebonds. Wirebonds in power devices and modules are prone to resistance, noise, parasitic oscillations, fatigue and eventual failure. Furthermore, there has been an increase demand for higher power density and better efficiency for power …