Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 41 for “"working length"”.
-
Working Length Determination in Palatal Roots of Maxillary Molars
… the clinician’s ability to accurately determine working length. Twenty-seven extracted, human maxillary molars were sorted by palatal root curvatures as J- and C-type and the angle of curvature was determined. Straight-line access was made and a #20 file was placed into the canal until the tip …
-
Locking plates for distal femur fractures does an increased working length improve healing?
… these problems longer plates and an increased working length have been proposed to reduce construct rigidity. The purpose of our study is to investigate whether an increased working length translates into improved healing.
-
Change in Working Length at Different Stages of Instrumentation as a Function of Canal Curvature
… aim of this study was to determine the change in working length (∆WL) before and after coronal flaring and after complete rotary instrumentation as a function of canal curvature. One mesiobuccal or mesiolingual canal from each of 43 extracted molars had coronal standardization and access …
-
An in vitro comparison of working length accuracy between a digital system and conventional film when vertical angulation of the object is variable
Accurate determination of working length during endodontic therapy is critical in achieving a predictable and successful outcome. Working length is determined by the use of electronic apex locators, tactile perception, knowledge of average tooth lengths and dental radiography. Due to the increasing …
-
An in-vitro comparison of working length determination between a digital system and conventional film when source-film/sensor distance and exposure time are modified
Accurate determination of working length during endodontic therapy is a crucial step in achieving a predictable outcome. This is determined by the use of electronic apex locators, tactile perception, and knowledge of average tooth lengths and/or dental radiography whether digital or conventional is …
-
In vitro evaluation of bone plate strain following fracture repair using different screw configurations
… fracture configurations. The effect of plate working length, plate contact, fracture length and position on strain was evaluated using bone surrogates subjected to “load controlled”, non-destructive conditions. We hypothesized that under load-controlled conditions, plates with a long working …
-
Comparison of the obturation density of gutta percha using cold lateral condensation and varying continuous wave of condensation techniques
… by advancing the plugger to 3 mm short of the working length at 100°C, 200°C, and 300°C, respectively, and then backfilled. In groups 5-7 the plugger was advanced to 5 mm short of working length. The blocks were weighed again after obturation. Data were analyzed using a one-way ANOVA and …
-
Comparison of the sealing ability of two different types of root canal obturation: Cold lateral compaction and the continuous wave compaction technique.
… NaOCL irrigant. Two groups were instrumented to working length with 0.06 ProFiles. Two groups were instrumented to within 1.0mm of the working length with 0.06 ProFiles and the last mm was prepared with a hand file. Two groups, one with hand filing and one without, were obturated using cold …
-
Comparison of the obturation density of Resilon using cold lateral condensation and varying continuous wave of condensation techniques.
… the plugger taken to a depth of 3 mm short of working length, and then backfilled. Groups 5, 6, and 7 were obturated in the same manner; however, the plugger was only taken to 5 mm short of working length. Data were analyzed using a one-way ANOVA and Tukey’s HSD tests. Results indicated a …
-
Auswirkung der Schwingstrecke und des Platten-Winkels einer Doppelplatten-Osteosynthese in einem ovinen Tibia-Defektmodell - eine Finite-Elemente-Analyse
… torsion at 25 Nm. The models differed by plate length, plate-to-bone distance, number of screws and plate working length. Results Single-plate osteosynthesis in a CSD resulted in implant failure within the first loading cycles. In the DPO, the 120° configuration resulted in an 12.9 times higher …
-
In Vitro Evaluation of the Solubility of EndoSequence BC Sealer in Acidic Solutions
… size F4. The canals were obturated 2 mm short of working length with gutta-percha (GP) and BCS using a single cone. The teeth were randomly assigned into 3 groups (N = 5/group) based on solution: chloroform, 5% acetic acid, or 37% phosphoric acid. GP was removed using ProTaper Universal Retreament …
-
CanalPro EAL Accuracy compared to the Root ZX EAL
… are an effective instrument in measuring the working length of a canal. The Root ZX is considered the gold standard by many. The aim of this research is to compare the accuracy of the CanalPro EAL to the Root ZX. Methods: The actual length of 43 single rooted extracted teeth were measured with …
-
Pilot study evaluating the EZ Guide endodontic sensor holder: feasibility and radiographic performance for canal separation in mandibular molars
… periapical radiograph using the EZ Guide during working length determination. Outcomes were assessed in two domains. The first was radiographic coverage quality, assessed using five binary parameters (working-length diagnostic acceptability, cone cut, apical cut-off, periapical area missing, and …
-
In Vitro Accuracy of the E-PEX Electronic Apex Locator Compared to the Root ZX II in the Presence of Various Irrigation Solutions
… (NSRCT). This reference point determines the working length, and is commonly calculated with the aid of an electronic apex locator (EAL), which accurately identifies the apical foramen which in turn determines the working length. Throughout endodontic procedures, clinicians utilize a range of …
-
In Vitro Accuracy of the E-PEX Electronic Apex Locator Compared to the Root ZX II
… root canal treatment (NSRCT) is determining the working length of the canal which indicates the exact end point of root canal preparation and obturation. The development of the Electronic Apex Locator (EAL) has helped the clinician to determine the location of the apical foramen, and hence the …
-
Clinical Significance of Gutta Percha Variability
… two gutta percha brands’ abilities to reach the working length after instrumentation and fill. The alternative hypothesis is that variability in the manufacturing process leads to gutta percha points failing to be within an acceptable range of working length at cone try in. Materials and Methods. …
-
In Vitro Precision of the E-PEX Electronic Apex Locator Compared to the Root ZX II in Various Embedding Media
… root canal treatment (NSRCT) is determining the working length of the canal which indicates the end point of root canal preparation and obturation. The development of the Electronic Apex Locator (EAL) has helped the clinician to determine the location of the apical foramen, and hence the working …
-
Standardisierung der Schwingstrecke in einer winkelstabilen Plattenosteosynthese
… has been demonstrated in numerous studies. Plate working length (PWL) has been identified as an essential discriminator of healing success. Insufficient control and inconsistent reporting of mechanical boundary conditions have hampered the development of a more comprehensive fracture fixation …
-
Cleaning Efficiency of Nickel Titanium GT and .04 Rotary Files when used in a Torque Controlled Rotary Handpiece
… Profile NiTi files until a size 35 advanced to working length. Samples were sectioned, the apical 6 mm of the canal was photographed (x20) and projected onto a 3 x 4 foot grid with squares measuring 0.5 inches each. Total debris was the percentage of the number of squares containing debris …
-
Evaluation and Analysis of the Apically Extruded Gutta Percha Using Thermoplasticized Technique as Sole Obturation Method (Squirting)
… it was visible at the portal of exit, with the working length being determined by subtracting 1 mm from this measurement. At this measurement, the first file to bind (FFTB) was determined for each tooth. After determination of the FFTB, a glide path equal to size 20 handfile was created. The …
Page 1 of 3