{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:10929"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:10929","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"Modelling, characterisation and optimisation of deep geothermal energy in the Cheshire basin","abstract":"Despite the significant geothermal resource in the UK, only one small scale scheme in Southampton is presently operating. Few wells have been drilled to target deep resources, particularly in the Cheshire Basin where only two wells have penetrated depths approaching 3 km. As a result, the knowledge of aquifer quality in the more central parts of the basin is limited, meaning there is a high geological risk associated to any geothermal development. To investigate this, a single well model was designed to simulate the extraction of fluid from the Collyhurst Sandstone Formation. Simulations of a range of geological and engineering parameters highlighted hydraulic conductivity could be the most significant obstacle to production, however, it could be minimised by altering engineering parameters (i.e., production rate, length and position of the well screen). A key issue with conventional extraction only methods is the disposal of waste water. To circumvent this issue, innovative deep borehole heat exchangers and standing column wells were modelled. Results indicated that both methods can produce heat loads up to 3.7 MW for short periods. Further analysis was also undertaken on heat exchangers, highlighting significant savings could be made from switching to a geothermal run heat network (>£49 million).","abstract_html":"Despite the significant geothermal resource in the UK, only one small scale scheme in Southampton is presently operating. Few wells have been drilled to target deep resources, particularly in the Cheshire Basin where only two wells have penetrated depths approaching 3 km. As a result, the knowledge of aquifer quality in the more central parts of the basin is limited, meaning there is a high geological risk associated to any geothermal development. To investigate this, a single well model was designed to simulate the extraction of fluid from the Collyhurst Sandstone Formation. Simulations of a range of geological and engineering parameters highlighted hydraulic conductivity could be the most significant obstacle to production, however, it could be minimised by altering engineering parameters (i.e., production rate, length and position of the well screen). A key issue with conventional extraction only methods is the disposal of waste water. To circumvent this issue, innovative deep borehole heat exchangers and standing column wells were modelled. Results indicated that both methods can produce heat loads up to 3.7 MW for short periods. Further analysis was also undertaken on heat exchangers, highlighting significant savings could be made from switching to a geothermal run heat network (&gt;£49 million).","abstract_has_math":false,"creators":["Brown, Christopher Simon"],"institution":"University of Birmingham","degree_name":"d_ph","degree_level":"d_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2020,"date_issued":"2020-11","date_published":"2020-11","updated_at":"2026-11-19T09:31:15Z","subjects":["QA Mathematics","QA75 Electronic computers. Computer science","QE Geology"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[{"key":"dc:identifier.grantnumber","label":"Dc Identifier Grantnumber","values":["NE/M00998X/1"],"render_values":[{"text":"NE/M00998X/1","href":null,"code":true}]}],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/10929/7/Brown2020PhD.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A10929","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["nerc"]},{"key":"dc:creator","label":"Author","values":["Brown, Christopher Simon"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2020-11-25"]},{"key":"dc:date.issued","label":"Date","values":["2020-11"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Engineering, Department of Civil Engineering"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/10929/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["d_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["d_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["QA Mathematics","QA75 Electronic computers. Computer science","QE Geology"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.grantnumber","label":"Dc Identifier Grantnumber","values":["NE/M00998X/1"]},{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/10929/7/Brown2020PhD.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Despite the significant geothermal resource in the UK, only one small scale scheme in Southampton is presently operating. Few wells have been drilled to target deep resources, particularly in the Cheshire Basin where only two wells have penetrated depths approaching 3 km. As a result, the knowledge of aquifer quality in the more central parts of the basin is limited, meaning there is a high geological risk associated to any geothermal development. To investigate this, a single well model was designed to simulate the extraction of fluid from the Collyhurst Sandstone Formation. Simulations of a range of geological and engineering parameters highlighted hydraulic conductivity could be the most significant obstacle to production, however, it could be minimised by altering engineering parameters (i.e., production rate, length and position of the well screen). A key issue with conventional extraction only methods is the disposal of waste water. To circumvent this issue, innovative deep borehole heat exchangers and standing column wells were modelled. Results indicated that both methods can produce heat loads up to 3.7 MW for short periods. Further analysis was also undertaken on heat exchangers, highlighting significant savings could be made from switching to a geothermal run heat network (>£49 million)."]},{"key":"dc:format","label":"Dc Format","values":["text"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public"]},{"key":"dc:title","label":"Title","values":["Modelling, characterisation and optimisation of deep geothermal energy in the Cheshire basin"]}]}],"canonical_facts":{"dc:contributor.sponsor":["nerc"],"dc:creator":["Brown, Christopher Simon"],"dc:date":["2020-11-25"],"dc:date.issued":["2020-11"],"dc:description.abstract":["Despite the significant geothermal resource in the UK, only one small scale scheme in Southampton is presently operating. Few wells have been drilled to target deep resources, particularly in the Cheshire Basin where only two wells have penetrated depths approaching 3 km. As a result, the knowledge of aquifer quality in the more central parts of the basin is limited, meaning there is a high geological risk associated to any geothermal development. To investigate this, a single well model was designed to simulate the extraction of fluid from the Collyhurst Sandstone Formation. Simulations of a range of geological and engineering parameters highlighted hydraulic conductivity could be the most significant obstacle to production, however, it could be minimised by altering engineering parameters (i.e., production rate, length and position of the well screen). A key issue with conventional extraction only methods is the disposal of waste water. To circumvent this issue, innovative deep borehole heat exchangers and standing column wells were modelled. Results indicated that both methods can produce heat loads up to 3.7 MW for short periods. Further analysis was also undertaken on heat exchangers, highlighting significant savings could be made from switching to a geothermal run heat network (>£49 million)."],"dc:format":["text"],"dc:identifier.grantnumber":["NE/M00998X/1"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/10929/7/Brown2020PhD.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Engineering, Department of Civil Engineering"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/10929/"],"dc:subject":["QA Mathematics","QA75 Electronic computers. Computer science","QE Geology"],"dcterms:accessrights":["public"],"dc:title":["Modelling, characterisation and optimisation of deep geothermal energy in the Cheshire basin"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["d_ph"],"dc:type.qualificationname":["d_ph"]},"updated_at":"2026-11-19T09:31:15Z"}