{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:12268"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:12268","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"Stable and metastable solidification of cast iron","abstract":"The stable to metastable eutectic transition was studied in three cast •irons with carbon equivalents of 4.0 and silicon contents of 1.00$, 2.04$ and 2.43$. Castings were produced in sand moulds containing a solid steel chill as well as in heated and unheated ceramic moulds* cooled at one end by a water cooled copper chill. Structural variations obtained were analysed with reference to physical conditions of cooling within the castings and compositional differences between the alloys. Transformations in white and mottled structures during freezing or near the freezing temperature were studied by rapid solidification and isothermal treatments in heated metal moulds. Castings produced in a polished copper chill mould had plane surfaces enabling study of nucleation and growth processes under chill conditions. The 2.04$ Si alloy was used as a base for the addition of a range of pure elements to study structural variations in heated ceramic mould castings. Thermal analysis, macrostructures and microstructural examinations indicate that metastable eutectic may partly or fully decompose during the cooling of a casting. Microstructural examinations by optical and scanning electron microscopes provide evidence of such decomposition. Etching in alkaline sodium picrate or bromine solution was found valuable for this purpose. Amounts of carbide decomposition increased with increasing silicon content and transformation temperature, and decreased as post-solidification cooling rates increased. Solidification of hypoeutectic alloys at chill surfaces may produce areas containing primary cementite needles.","abstract_html":"The stable to metastable eutectic transition was studied in three cast •irons with carbon equivalents of 4.0 and silicon contents of 1.00$, 2.04$ and 2.43$. Castings were produced in sand moulds containing a solid steel chill as well as in heated and unheated ceramic moulds* cooled at one end by a water cooled copper chill. Structural variations obtained were analysed with reference to physical conditions of cooling within the castings and compositional differences between the alloys. Transformations in white and mottled structures during freezing or near the freezing temperature were studied by rapid solidification and isothermal treatments in heated metal moulds. Castings produced in a polished copper chill mould had plane surfaces enabling study of nucleation and growth processes under chill conditions. The 2.04$ Si alloy was used as a base for the addition of a range of pure elements to study structural variations in heated ceramic mould castings. Thermal analysis, macrostructures and microstructural examinations indicate that metastable eutectic may partly or fully decompose during the cooling of a casting. Microstructural examinations by optical and scanning electron microscopes provide evidence of such decomposition. Etching in alkaline sodium picrate or bromine solution was found valuable for this purpose. Amounts of carbide decomposition increased with increasing silicon content and transformation temperature, and decreased as post-solidification cooling rates increased. Solidification of hypoeutectic alloys at chill surfaces may produce areas containing primary cementite needles.","abstract_has_math":true,"creators":["Jones, Stephen Bruce"],"institution":"University of Birmingham","degree_name":"d_ph","degree_level":"d_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":1971,"date_issued":"1971","date_published":"1971","updated_at":"2026-11-19T09:31:41Z","subjects":["TN Mining engineering. Metallurgy"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/12268/1/Jones1971PhD.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A12268","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["other"]},{"key":"dc:creator","label":"Author","values":["Jones, Stephen Bruce"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["1971"]},{"key":"dc:date.issued","label":"Date","values":["1971"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["Faculty of Engineering","Department of Industrial Metallurgy"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/12268/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["d_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["d_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TN Mining engineering. Metallurgy"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/12268/1/Jones1971PhD.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["The stable to metastable eutectic transition was studied in three cast •irons with carbon equivalents of 4.0 and silicon contents of 1.00$, 2.04$ and 2.43$. Castings were produced in sand moulds containing a solid steel chill as well as in heated and unheated ceramic moulds* cooled at one end by a water cooled copper chill. Structural variations obtained were analysed with reference to physical conditions of cooling within the castings and compositional differences between the alloys. Transformations in white and mottled structures during freezing or near the freezing temperature were studied by rapid solidification and isothermal treatments in heated metal moulds. Castings produced in a polished copper chill mould had plane surfaces enabling study of nucleation and growth processes under chill conditions. The 2.04$ Si alloy was used as a base for the addition of a range of pure elements to study structural variations in heated ceramic mould castings. Thermal analysis, macrostructures and microstructural examinations indicate that metastable eutectic may partly or fully decompose during the cooling of a casting. Microstructural examinations by optical and scanning electron microscopes provide evidence of such decomposition. Etching in alkaline sodium picrate or bromine solution was found valuable for this purpose. Amounts of carbide decomposition increased with increasing silicon content and transformation temperature, and decreased as post-solidification cooling rates increased. Solidification of hypoeutectic alloys at chill surfaces may produce areas containing primary cementite needles."]},{"key":"dc:format","label":"Dc Format","values":["text"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public"]},{"key":"dc:title","label":"Title","values":["Stable and metastable solidification of cast iron"]}]}],"canonical_facts":{"dc:contributor.sponsor":["other"],"dc:creator":["Jones, Stephen Bruce"],"dc:date":["1971"],"dc:date.issued":["1971"],"dc:description.abstract":["The stable to metastable eutectic transition was studied in three cast •irons with carbon equivalents of 4.0 and silicon contents of 1.00$, 2.04$ and 2.43$. Castings were produced in sand moulds containing a solid steel chill as well as in heated and unheated ceramic moulds* cooled at one end by a water cooled copper chill. Structural variations obtained were analysed with reference to physical conditions of cooling within the castings and compositional differences between the alloys. Transformations in white and mottled structures during freezing or near the freezing temperature were studied by rapid solidification and isothermal treatments in heated metal moulds. Castings produced in a polished copper chill mould had plane surfaces enabling study of nucleation and growth processes under chill conditions. The 2.04$ Si alloy was used as a base for the addition of a range of pure elements to study structural variations in heated ceramic mould castings. Thermal analysis, macrostructures and microstructural examinations indicate that metastable eutectic may partly or fully decompose during the cooling of a casting. Microstructural examinations by optical and scanning electron microscopes provide evidence of such decomposition. Etching in alkaline sodium picrate or bromine solution was found valuable for this purpose. Amounts of carbide decomposition increased with increasing silicon content and transformation temperature, and decreased as post-solidification cooling rates increased. Solidification of hypoeutectic alloys at chill surfaces may produce areas containing primary cementite needles."],"dc:format":["text"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/12268/1/Jones1971PhD.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["Faculty of Engineering","Department of Industrial Metallurgy"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/12268/"],"dc:subject":["TN Mining engineering. Metallurgy"],"dcterms:accessrights":["public"],"dc:title":["Stable and metastable solidification of cast iron"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["d_ph"],"dc:type.qualificationname":["d_ph"]},"updated_at":"2026-11-19T09:31:41Z"}