{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:16602"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:16602","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"Modelling thermodynamic and kinetic reactions between ceramic oxides and ti-alloy melt","abstract":"Casting titanium alloys presents significant challenges due to the high reactivity of titanium in its molten state. This reactivity renders ceramic mould oxides highly susceptible to chemical reactions, leading to premature mould failure and contamination of the liquid metal by ceramic inclusions. Developing robust oxide systems is therefore crucial to mitigating mould degradation and ensuring the homogeneity, precision and geometric accuracy of the final cast. While numerous experimental studies have examined the behaviour of oxides in contact with liquid titanium alloys, there is limited understanding of how to select and design new oxide systems. Furthermore, modelling efforts in this field remain scarce, often constrained by the lack of reliable thermodynamic data, insufficient insight into metal-mould interactions and an over reliance on simplified binary system models. This study introduces a combined thermodynamic and kinetic framework to analyse metal-mould reactions. CALPHAD-based thermodynamic data was used to evaluate the interactions between titanium and mould oxides, providing inputs for a kinetic model based on the Frozen Gradient Approximation (FGA). The FGA was extended to incorporate multi-component and multi-phase interactions, enabling a more comprehensive analysis of oxide behaviour. The results demonstrate that all mould oxides dissolve to some extent and none studied remain completely stable in contact with the TiAl alloy. However, several strategies were identified to minimize reaction rates and improve oxide stability. Among these, multi-phase oxide systems, such as Al2O3- Mullite and YAG-YAP demonstrated enhanced stability when combined, compared to their performance as individual oxides. This is attributed to the potential of multiphase oxides with shared ions to serve as more durable mould materials. Notably, Al2O3-Mullite proved effective in suppressing alpha-case formation, further enhancing oxide stability in titanium casting applications. In existing literature, Y2O3 is widely regarded as the most stable oxide for titanium casting, with CaO typically ranked as the second most stable. However, the sequential oxide selection method employed in this study reveals additional oxides and oxide combinations with stability levels that fall between those of yttria and calcia. These include, systems such as YAM, CaYAlO4 and YAM-YAP. These demonstrate significant potential as alternative mould materials, offering intermediate stability.","abstract_html":"Casting titanium alloys presents significant challenges due to the high reactivity of titanium in its molten state. This reactivity renders ceramic mould oxides highly susceptible to chemical reactions, leading to premature mould failure and contamination of the liquid metal by ceramic inclusions. Developing robust oxide systems is therefore crucial to mitigating mould degradation and ensuring the homogeneity, precision and geometric accuracy of the final cast. While numerous experimental studies have examined the behaviour of oxides in contact with liquid titanium alloys, there is limited understanding of how to select and design new oxide systems. Furthermore, modelling efforts in this field remain scarce, often constrained by the lack of reliable thermodynamic data, insufficient insight into metal-mould interactions and an over reliance on simplified binary system models. This study introduces a combined thermodynamic and kinetic framework to analyse metal-mould reactions. CALPHAD-based thermodynamic data was used to evaluate the interactions between titanium and mould oxides, providing inputs for a kinetic model based on the Frozen Gradient Approximation (FGA). The FGA was extended to incorporate multi-component and multi-phase interactions, enabling a more comprehensive analysis of oxide behaviour. The results demonstrate that all mould oxides dissolve to some extent and none studied remain completely stable in contact with the TiAl alloy. However, several strategies were identified to minimize reaction rates and improve oxide stability. Among these, multi-phase oxide systems, such as Al2O3- Mullite and YAG-YAP demonstrated enhanced stability when combined, compared to their performance as individual oxides. This is attributed to the potential of multiphase oxides with shared ions to serve as more durable mould materials. Notably, Al2O3-Mullite proved effective in suppressing alpha-case formation, further enhancing oxide stability in titanium casting applications. In existing literature, Y2O3 is widely regarded as the most stable oxide for titanium casting, with CaO typically ranked as the second most stable. However, the sequential oxide selection method employed in this study reveals additional oxides and oxide combinations with stability levels that fall between those of yttria and calcia. These include, systems such as YAM, CaYAlO4 and YAM-YAP. These demonstrate significant potential as alternative mould materials, offering intermediate stability.","abstract_has_math":false,"creators":["Moses, Joseph"],"institution":"University of Birmingham","degree_name":"d_ph","degree_level":"d_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2025,"date_issued":"2025-12","date_published":"2025-12","updated_at":"2026-11-19T09:33:16Z","subjects":["Q Science (General)","QD Chemistry"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/16602/1/Moses2025PhD.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A16602","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["other"]},{"key":"dc:creator","label":"Author","values":["Moses, Joseph"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2025-12-16"]},{"key":"dc:date.issued","label":"Date","values":["2025-12"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/16602/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["d_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["d_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["Q Science (General)","QD Chemistry"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/16602/1/Moses2025PhD.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Casting titanium alloys presents significant challenges due to the high reactivity of titanium in its molten state. This reactivity renders ceramic mould oxides highly susceptible to chemical reactions, leading to premature mould failure and contamination of the liquid metal by ceramic inclusions. Developing robust oxide systems is therefore crucial to mitigating mould degradation and ensuring the homogeneity, precision and geometric accuracy of the final cast. While numerous experimental studies have examined the behaviour of oxides in contact with liquid titanium alloys, there is limited understanding of how to select and design new oxide systems. Furthermore, modelling efforts in this field remain scarce, often constrained by the lack of reliable thermodynamic data, insufficient insight into metal-mould interactions and an over reliance on simplified binary system models. This study introduces a combined thermodynamic and kinetic framework to analyse metal-mould reactions. CALPHAD-based thermodynamic data was used to evaluate the interactions between titanium and mould oxides, providing inputs for a kinetic model based on the Frozen Gradient Approximation (FGA). The FGA was extended to incorporate multi-component and multi-phase interactions, enabling a more comprehensive analysis of oxide behaviour. The results demonstrate that all mould oxides dissolve to some extent and none studied remain completely stable in contact with the TiAl alloy. However, several strategies were identified to minimize reaction rates and improve oxide stability. Among these, multi-phase oxide systems, such as Al2O3- Mullite and YAG-YAP demonstrated enhanced stability when combined, compared to their performance as individual oxides. This is attributed to the potential of multiphase oxides with shared ions to serve as more durable mould materials. Notably, Al2O3-Mullite proved effective in suppressing alpha-case formation, further enhancing oxide stability in titanium casting applications. In existing literature, Y2O3 is widely regarded as the most stable oxide for titanium casting, with CaO typically ranked as the second most stable. However, the sequential oxide selection method employed in this study reveals additional oxides and oxide combinations with stability levels that fall between those of yttria and calcia. These include, systems such as YAM, CaYAlO4 and YAM-YAP. These demonstrate significant potential as alternative mould materials, offering intermediate stability."]},{"key":"dc:format","label":"Dc Format","values":["text"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public"]},{"key":"dc:title","label":"Title","values":["Modelling thermodynamic and kinetic reactions between ceramic oxides and ti-alloy melt"]}]}],"canonical_facts":{"dc:contributor.sponsor":["other"],"dc:creator":["Moses, Joseph"],"dc:date":["2025-12-16"],"dc:date.issued":["2025-12"],"dc:description.abstract":["Casting titanium alloys presents significant challenges due to the high reactivity of titanium in its molten state. This reactivity renders ceramic mould oxides highly susceptible to chemical reactions, leading to premature mould failure and contamination of the liquid metal by ceramic inclusions. Developing robust oxide systems is therefore crucial to mitigating mould degradation and ensuring the homogeneity, precision and geometric accuracy of the final cast. While numerous experimental studies have examined the behaviour of oxides in contact with liquid titanium alloys, there is limited understanding of how to select and design new oxide systems. Furthermore, modelling efforts in this field remain scarce, often constrained by the lack of reliable thermodynamic data, insufficient insight into metal-mould interactions and an over reliance on simplified binary system models. This study introduces a combined thermodynamic and kinetic framework to analyse metal-mould reactions. CALPHAD-based thermodynamic data was used to evaluate the interactions between titanium and mould oxides, providing inputs for a kinetic model based on the Frozen Gradient Approximation (FGA). The FGA was extended to incorporate multi-component and multi-phase interactions, enabling a more comprehensive analysis of oxide behaviour. The results demonstrate that all mould oxides dissolve to some extent and none studied remain completely stable in contact with the TiAl alloy. However, several strategies were identified to minimize reaction rates and improve oxide stability. Among these, multi-phase oxide systems, such as Al2O3- Mullite and YAG-YAP demonstrated enhanced stability when combined, compared to their performance as individual oxides. This is attributed to the potential of multiphase oxides with shared ions to serve as more durable mould materials. Notably, Al2O3-Mullite proved effective in suppressing alpha-case formation, further enhancing oxide stability in titanium casting applications. In existing literature, Y2O3 is widely regarded as the most stable oxide for titanium casting, with CaO typically ranked as the second most stable. However, the sequential oxide selection method employed in this study reveals additional oxides and oxide combinations with stability levels that fall between those of yttria and calcia. These include, systems such as YAM, CaYAlO4 and YAM-YAP. These demonstrate significant potential as alternative mould materials, offering intermediate stability."],"dc:format":["text"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/16602/1/Moses2025PhD.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/16602/"],"dc:subject":["Q Science (General)","QD Chemistry"],"dcterms:accessrights":["public"],"dc:title":["Modelling thermodynamic and kinetic reactions between ceramic oxides and ti-alloy melt"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["d_ph"],"dc:type.qualificationname":["d_ph"]},"updated_at":"2026-11-19T09:33:16Z"}