{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:18256"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:18256","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"The formation of carbon in diffusion flames: with special reference to the effect of additives","abstract":"Previous approaches to the problem of carbon formation in flames have been mainly direct ones, i.e. the correlation of the smoking tendency of hydrocarbons with their structural features, spectroscopic studies of the flame, etc. In the present work an indirect experimental approach to the problem has been used; the effect on the rate of soot formation from hydrocarbon/air diffusion flames, produced by introducing additives into both the fuel and air streams has been studied. In addition an examination has been made of the compounds in the soot from a Buta-gas/air diffusion flame and the nature of these compounds has been compared with those extracted from the soot of an acetylene/air diffusion flame. A circular diffusion burner has been employed and the measurement of the height of the flame and the weight of the soot collected in a given time have been adopted as two criteria of smoking tendency. The main findings are: (a) Halogenated compounds (CCI\\(_4\\), CHCI\\(_3\\), CH\\(_2\\)Cl\\(_2\\)j CH\\(_2\\)Br\\(2\\), CH\\(_3\\)I, C\\(_2\\)H\\(_4\\)Br\\(_2\\) and POCI\\(_3\\)) increase the rate of soot formation from hydrocarbon/air diffusion flames. (b) (CH\\(_3\\))\\(_3\\) PO\\(_4\\) increases the rate of soot formation from flames and (CH\\(_3\\))\\(_2\\)S causes a reduction in the flame's luminosity whilst CH\\(_3\\)NO\\(_2\\) has no apparent effect. (c) The effectiveness of halogen compounds in increasing the rate of soot formation from the flames employed suggests that these compounds when introduced into a flame remove hydrogen and thus increase the rate of soot formation by causing more extensive dehydrogenation. The increase in the rate of soot formation caused by the addition of halogenated compounds is accompanied by a parallel production of halogen acids and a reduction in the CO\\(_2\\) content of the combustion gases. (d) There are minimum additive concentrations in the fuel and in the airs below which no effect on the rate of soot formation can be observed. The ratio of the minimum additive concentration (mol./mol.) in the fuel to make the flame just smoky to its corresponding concentration in the air stream is a constant and is independent of the nature of the additive. This ratio is very close to the stoichiometric air/fuel ratio for the fuel. (e) The compounds extracted from the soot of Buta-gas/air and acetylene/air flame are similar and the presence of polynuclear aromatic hydrocarbons has been detected. It is concluded from the results and the work of others that the formation of carbon in hydrocarbon flames takes place via preliminary cracking of the hydrocarbons as far as acetylene. The acetylene thus formed may undergo a simultaneous condensation and dehydrogenation (Porter’s theory) in high temperature flames, but in lower temperature flames polymerization and cyclization occur, giving polynuclear aromatic hydrocarbons (and possibly fulvenic compounds). These complex compounds then undergo a further condensation, possibly droplet formation occurs, and finally dehydrogenation and nucleation with graphite formation probably occurs, as suggested by several authors.","abstract_html":"Previous approaches to the problem of carbon formation in flames have been mainly direct ones, i.e. the correlation of the smoking tendency of hydrocarbons with their structural features, spectroscopic studies of the flame, etc. In the present work an indirect experimental approach to the problem has been used; the effect on the rate of soot formation from hydrocarbon/air diffusion flames, produced by introducing additives into both the fuel and air streams has been studied. In addition an examination has been made of the compounds in the soot from a Buta-gas/air diffusion flame and the nature of these compounds has been compared with those extracted from the soot of an acetylene/air diffusion flame. A circular diffusion burner has been employed and the measurement of the height of the flame and the weight of the soot collected in a given time have been adopted as two criteria of smoking tendency. The main findings are: (a) Halogenated compounds (CCI<span class=\"etd-inline-math\"><sub>4</sub></span>, CHCI<span class=\"etd-inline-math\"><sub>3</sub></span>, CH<span class=\"etd-inline-math\"><sub>2</sub></span>Cl<span class=\"etd-inline-math\"><sub>2</sub></span>j CH<span class=\"etd-inline-math\"><sub>2</sub></span>Br\\(2\\), CH<span class=\"etd-inline-math\"><sub>3</sub></span>I, C<span class=\"etd-inline-math\"><sub>2</sub></span>H<span class=\"etd-inline-math\"><sub>4</sub></span>Br<span class=\"etd-inline-math\"><sub>2</sub></span> and POCI<span class=\"etd-inline-math\"><sub>3</sub></span>) increase the rate of soot formation from hydrocarbon/air diffusion flames. (b) (CH<span class=\"etd-inline-math\"><sub>3</sub></span>)<span class=\"etd-inline-math\"><sub>3</sub></span> PO<span class=\"etd-inline-math\"><sub>4</sub></span> increases the rate of soot formation from flames and (CH<span class=\"etd-inline-math\"><sub>3</sub></span>)<span class=\"etd-inline-math\"><sub>2</sub></span>S causes a reduction in the flame&#x27;s luminosity whilst CH<span class=\"etd-inline-math\"><sub>3</sub></span>NO<span class=\"etd-inline-math\"><sub>2</sub></span> has no apparent effect. (c) The effectiveness of halogen compounds in increasing the rate of soot formation from the flames employed suggests that these compounds when introduced into a flame remove hydrogen and thus increase the rate of soot formation by causing more extensive dehydrogenation. The increase in the rate of soot formation caused by the addition of halogenated compounds is accompanied by a parallel production of halogen acids and a reduction in the CO<span class=\"etd-inline-math\"><sub>2</sub></span> content of the combustion gases. (d) There are minimum additive concentrations in the fuel and in the airs below which no effect on the rate of soot formation can be observed. The ratio of the minimum additive concentration (mol./mol.) in the fuel to make the flame just smoky to its corresponding concentration in the air stream is a constant and is independent of the nature of the additive. This ratio is very close to the stoichiometric air/fuel ratio for the fuel. (e) The compounds extracted from the soot of Buta-gas/air and acetylene/air flame are similar and the presence of polynuclear aromatic hydrocarbons has been detected. It is concluded from the results and the work of others that the formation of carbon in hydrocarbon flames takes place via preliminary cracking of the hydrocarbons as far as acetylene. The acetylene thus formed may undergo a simultaneous condensation and dehydrogenation (Porter’s theory) in high temperature flames, but in lower temperature flames polymerization and cyclization occur, giving polynuclear aromatic hydrocarbons (and possibly fulvenic compounds). These complex compounds then undergo a further condensation, possibly droplet formation occurs, and finally dehydrogenation and nucleation with graphite formation probably occurs, as suggested by several authors.","abstract_has_math":true,"creators":["Badakhshan, Amir"],"institution":"University of Birmingham","degree_name":"d_ph","degree_level":"d_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":1957,"date_issued":"1957","date_published":"1957","updated_at":"2026-11-19T09:33:16Z","subjects":["QD Chemistry","TP Chemical technology"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/18256/1/Badakhshan1957PhD_04195892_18256.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A18256","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["other"]},{"key":"dc:creator","label":"Author","values":["Badakhshan, Amir"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["1957"]},{"key":"dc:date.issued","label":"Date","values":["1957"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["Faculty of Science","Department of Chemical Engineering"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/18256/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["d_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["d_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["QD Chemistry","TP Chemical technology"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/18256/1/Badakhshan1957PhD_04195892_18256.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Previous approaches to the problem of carbon formation in flames have been mainly direct ones, i.e. the correlation of the smoking tendency of hydrocarbons with their structural features, spectroscopic studies of the flame, etc. In the present work an indirect experimental approach to the problem has been used; the effect on the rate of soot formation from hydrocarbon/air diffusion flames, produced by introducing additives into both the fuel and air streams has been studied. In addition an examination has been made of the compounds in the soot from a Buta-gas/air diffusion flame and the nature of these compounds has been compared with those extracted from the soot of an acetylene/air diffusion flame. A circular diffusion burner has been employed and the measurement of the height of the flame and the weight of the soot collected in a given time have been adopted as two criteria of smoking tendency. The main findings are: (a) Halogenated compounds (CCI\\(_4\\), CHCI\\(_3\\), CH\\(_2\\)Cl\\(_2\\)j CH\\(_2\\)Br\\(2\\), CH\\(_3\\)I, C\\(_2\\)H\\(_4\\)Br\\(_2\\) and POCI\\(_3\\)) increase the rate of soot formation from hydrocarbon/air diffusion flames. (b) (CH\\(_3\\))\\(_3\\) PO\\(_4\\) increases the rate of soot formation from flames and (CH\\(_3\\))\\(_2\\)S causes a reduction in the flame's luminosity whilst CH\\(_3\\)NO\\(_2\\) has no apparent effect. (c) The effectiveness of halogen compounds in increasing the rate of soot formation from the flames employed suggests that these compounds when introduced into a flame remove hydrogen and thus increase the rate of soot formation by causing more extensive dehydrogenation. The increase in the rate of soot formation caused by the addition of halogenated compounds is accompanied by a parallel production of halogen acids and a reduction in the CO\\(_2\\) content of the combustion gases. (d) There are minimum additive concentrations in the fuel and in the airs below which no effect on the rate of soot formation can be observed. The ratio of the minimum additive concentration (mol./mol.) in the fuel to make the flame just smoky to its corresponding concentration in the air stream is a constant and is independent of the nature of the additive. This ratio is very close to the stoichiometric air/fuel ratio for the fuel. (e) The compounds extracted from the soot of Buta-gas/air and acetylene/air flame are similar and the presence of polynuclear aromatic hydrocarbons has been detected. It is concluded from the results and the work of others that the formation of carbon in hydrocarbon flames takes place via preliminary cracking of the hydrocarbons as far as acetylene. The acetylene thus formed may undergo a simultaneous condensation and dehydrogenation (Porter’s theory) in high temperature flames, but in lower temperature flames polymerization and cyclization occur, giving polynuclear aromatic hydrocarbons (and possibly fulvenic compounds). These complex compounds then undergo a further condensation, possibly droplet formation occurs, and finally dehydrogenation and nucleation with graphite formation probably occurs, as suggested by several authors."]},{"key":"dc:format","label":"Dc Format","values":["text"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public"]},{"key":"dc:title","label":"Title","values":["The formation of carbon in diffusion flames: with special reference to the effect of additives"]}]}],"canonical_facts":{"dc:contributor.sponsor":["other"],"dc:creator":["Badakhshan, Amir"],"dc:date":["1957"],"dc:date.issued":["1957"],"dc:description.abstract":["Previous approaches to the problem of carbon formation in flames have been mainly direct ones, i.e. the correlation of the smoking tendency of hydrocarbons with their structural features, spectroscopic studies of the flame, etc. In the present work an indirect experimental approach to the problem has been used; the effect on the rate of soot formation from hydrocarbon/air diffusion flames, produced by introducing additives into both the fuel and air streams has been studied. In addition an examination has been made of the compounds in the soot from a Buta-gas/air diffusion flame and the nature of these compounds has been compared with those extracted from the soot of an acetylene/air diffusion flame. A circular diffusion burner has been employed and the measurement of the height of the flame and the weight of the soot collected in a given time have been adopted as two criteria of smoking tendency. The main findings are: (a) Halogenated compounds (CCI\\(_4\\), CHCI\\(_3\\), CH\\(_2\\)Cl\\(_2\\)j CH\\(_2\\)Br\\(2\\), CH\\(_3\\)I, C\\(_2\\)H\\(_4\\)Br\\(_2\\) and POCI\\(_3\\)) increase the rate of soot formation from hydrocarbon/air diffusion flames. (b) (CH\\(_3\\))\\(_3\\) PO\\(_4\\) increases the rate of soot formation from flames and (CH\\(_3\\))\\(_2\\)S causes a reduction in the flame's luminosity whilst CH\\(_3\\)NO\\(_2\\) has no apparent effect. (c) The effectiveness of halogen compounds in increasing the rate of soot formation from the flames employed suggests that these compounds when introduced into a flame remove hydrogen and thus increase the rate of soot formation by causing more extensive dehydrogenation. The increase in the rate of soot formation caused by the addition of halogenated compounds is accompanied by a parallel production of halogen acids and a reduction in the CO\\(_2\\) content of the combustion gases. (d) There are minimum additive concentrations in the fuel and in the airs below which no effect on the rate of soot formation can be observed. The ratio of the minimum additive concentration (mol./mol.) in the fuel to make the flame just smoky to its corresponding concentration in the air stream is a constant and is independent of the nature of the additive. This ratio is very close to the stoichiometric air/fuel ratio for the fuel. (e) The compounds extracted from the soot of Buta-gas/air and acetylene/air flame are similar and the presence of polynuclear aromatic hydrocarbons has been detected. It is concluded from the results and the work of others that the formation of carbon in hydrocarbon flames takes place via preliminary cracking of the hydrocarbons as far as acetylene. The acetylene thus formed may undergo a simultaneous condensation and dehydrogenation (Porter’s theory) in high temperature flames, but in lower temperature flames polymerization and cyclization occur, giving polynuclear aromatic hydrocarbons (and possibly fulvenic compounds). These complex compounds then undergo a further condensation, possibly droplet formation occurs, and finally dehydrogenation and nucleation with graphite formation probably occurs, as suggested by several authors."],"dc:format":["text"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/18256/1/Badakhshan1957PhD_04195892_18256.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["Faculty of Science","Department of Chemical Engineering"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/18256/"],"dc:subject":["QD Chemistry","TP Chemical technology"],"dcterms:accessrights":["public"],"dc:title":["The formation of carbon in diffusion flames: with special reference to the effect of additives"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["d_ph"],"dc:type.qualificationname":["d_ph"]},"updated_at":"2026-11-19T09:33:16Z"}