{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:2894"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:2894","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"An investigation into the effect of stress on the formation and stability of carbon s-phase on austenitic stainless steel","abstract":"S-phase can be created in austenitic stainless steels by low-temperature thermochemical treatments, which greatly enhanced their hardness, wear resistance and fatigue properties because of the supersaturation by interstitials. One of the technological challenges associated with S-phase surface engineering is that the maximum layer thickness of the S-phase layers is very thin. The thickness of S-phase is restricted by its metastability and precipitation will occur as a result of prolonged treatment. In this project, the effect of in situ tensile stress on the formation of carbon S-phase on 316L austenitic stainless steel was investigated and it was demonstrated that the tensile stress thickened the S-phase layer by promoting the carbon diffusion in austenitic substrate. However, metastable carbides precipitated when applied tensile stress exceeded 40MPa. The thermo-mechanical stability of carbon S-phase was studied by creeping (tensile stress) and HIPping (compressive stress) tests. The results showed that the compressive stress retard the decomposition of S-phase by impeding the carbon diffusion; on the other hand, tensile stress promoted the carbon diffusion. The residual compressive and shear stresses in carbon S-phase was measured be 2.2 GPa and 132 MPa. The wear behaviour of carbon S-phase was studied by dry and oil lubricated reciprocating wear.","abstract_html":"S-phase can be created in austenitic stainless steels by low-temperature thermochemical treatments, which greatly enhanced their hardness, wear resistance and fatigue properties because of the supersaturation by interstitials. One of the technological challenges associated with S-phase surface engineering is that the maximum layer thickness of the S-phase layers is very thin. The thickness of S-phase is restricted by its metastability and precipitation will occur as a result of prolonged treatment. In this project, the effect of in situ tensile stress on the formation of carbon S-phase on 316L austenitic stainless steel was investigated and it was demonstrated that the tensile stress thickened the S-phase layer by promoting the carbon diffusion in austenitic substrate. However, metastable carbides precipitated when applied tensile stress exceeded 40MPa. The thermo-mechanical stability of carbon S-phase was studied by creeping (tensile stress) and HIPping (compressive stress) tests. The results showed that the compressive stress retard the decomposition of S-phase by impeding the carbon diffusion; on the other hand, tensile stress promoted the carbon diffusion. The residual compressive and shear stresses in carbon S-phase was measured be 2.2 GPa and 132 MPa. The wear behaviour of carbon S-phase was studied by dry and oil lubricated reciprocating wear.","abstract_has_math":false,"creators":["Li, Wei"],"institution":"University of Birmingham","degree_name":"d_ph","degree_level":"d_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2011,"date_issued":"2011-12","date_published":"2011-12","updated_at":"2026-11-19T09:26:53Z","subjects":["TN Mining engineering. Metallurgy"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/2894/1/Decl_IS_Li_11_PhD.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A2894","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["epsrc"]},{"key":"dc:creator","label":"Author","values":["Li, Wei"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2011-12"]},{"key":"dc:date.issued","label":"Date","values":["2011-12"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/2894/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["d_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["d_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TN Mining engineering. Metallurgy"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/2894/1/Decl_IS_Li_11_PhD.pdf","http://etheses.bham.ac.uk//id/eprint/2894/2/Li_11_PhD.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["S-phase can be created in austenitic stainless steels by low-temperature thermochemical treatments, which greatly enhanced their hardness, wear resistance and fatigue properties because of the supersaturation by interstitials. One of the technological challenges associated with S-phase surface engineering is that the maximum layer thickness of the S-phase layers is very thin. The thickness of S-phase is restricted by its metastability and precipitation will occur as a result of prolonged treatment. In this project, the effect of in situ tensile stress on the formation of carbon S-phase on 316L austenitic stainless steel was investigated and it was demonstrated that the tensile stress thickened the S-phase layer by promoting the carbon diffusion in austenitic substrate. However, metastable carbides precipitated when applied tensile stress exceeded 40MPa. The thermo-mechanical stability of carbon S-phase was studied by creeping (tensile stress) and HIPping (compressive stress) tests. The results showed that the compressive stress retard the decomposition of S-phase by impeding the carbon diffusion; on the other hand, tensile stress promoted the carbon diffusion. The residual compressive and shear stresses in carbon S-phase was measured be 2.2 GPa and 132 MPa. The wear behaviour of carbon S-phase was studied by dry and oil lubricated reciprocating wear."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["staffonly","public"]},{"key":"dc:title","label":"Title","values":["An investigation into the effect of stress on the formation and stability of carbon s-phase on austenitic stainless steel"]}]}],"canonical_facts":{"dc:contributor.sponsor":["epsrc"],"dc:creator":["Li, Wei"],"dc:date":["2011-12"],"dc:date.issued":["2011-12"],"dc:description.abstract":["S-phase can be created in austenitic stainless steels by low-temperature thermochemical treatments, which greatly enhanced their hardness, wear resistance and fatigue properties because of the supersaturation by interstitials. One of the technological challenges associated with S-phase surface engineering is that the maximum layer thickness of the S-phase layers is very thin. The thickness of S-phase is restricted by its metastability and precipitation will occur as a result of prolonged treatment. In this project, the effect of in situ tensile stress on the formation of carbon S-phase on 316L austenitic stainless steel was investigated and it was demonstrated that the tensile stress thickened the S-phase layer by promoting the carbon diffusion in austenitic substrate. However, metastable carbides precipitated when applied tensile stress exceeded 40MPa. The thermo-mechanical stability of carbon S-phase was studied by creeping (tensile stress) and HIPping (compressive stress) tests. The results showed that the compressive stress retard the decomposition of S-phase by impeding the carbon diffusion; on the other hand, tensile stress promoted the carbon diffusion. The residual compressive and shear stresses in carbon S-phase was measured be 2.2 GPa and 132 MPa. The wear behaviour of carbon S-phase was studied by dry and oil lubricated reciprocating wear."],"dc:format":["application/pdf"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/2894/1/Decl_IS_Li_11_PhD.pdf","http://etheses.bham.ac.uk//id/eprint/2894/2/Li_11_PhD.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/2894/"],"dc:subject":["TN Mining engineering. Metallurgy"],"dcterms:accessrights":["staffonly","public"],"dc:title":["An investigation into the effect of stress on the formation and stability of carbon s-phase on austenitic stainless steel"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["d_ph"],"dc:type.qualificationname":["d_ph"]},"updated_at":"2026-11-19T09:26:53Z"}