{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:3217"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:3217","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"Applications of perovskite oxide thin films: microcantilevers, superconducting devices and dielectric interconnections","abstract":"The aim of this Phd is to investigate the properties of micro-cantilevers, containing BaTiO\\(_3\\) based capacitors on their top and verify if they can be used as energy harvesting devices. SrRuO\\(_3\\)/BaTiO\\(_3\\) systems behaving as high quality (i.e. with an impedance phase between -80° and -90°) capacitive structures, in the frequency range 6KHz - 50KHz and with a residual polarization equal to 2.5 µC/cm\\(^2\\) have been fabricated on 400 nm thick MgO sacrificial layer. These structures allow to design micro-cantilevers with a minimum resonance frequency of 6KHz. Two piezoelectric modes are generally used in energy harvesting devices, they are the 33 and the 31 piezoelectric mode. X-ray diffraction analysis shows that the polar axis of BaTiO\\(_3\\) is perpendicular to the surface of the film when this layer is grown on SrRuO\\(_3\\) and SrTiO\\(_3\\). This configuration fits the 31 energy harvesting mode. When BaTiO\\(_3\\) is grown on MgO the polar axis is parallel to the surface of the film so this configuration fits the33 energy harvesting mode. Micro-cantilevers employing YBa\\(_2\\)Cu\\(_3\\)O\\(_7\\) and MgO sacrificial layers have been fabricated with a technology developed for the fabrication of Nb/Au/YBa\\(_2\\)Cu\\(_3\\)O\\(_7\\) ramp type Josephson junctions.","abstract_html":"The aim of this Phd is to investigate the properties of micro-cantilevers, containing BaTiO<span class=\"etd-inline-math\"><sub>3</sub></span> based capacitors on their top and verify if they can be used as energy harvesting devices. SrRuO<span class=\"etd-inline-math\"><sub>3</sub></span>/BaTiO<span class=\"etd-inline-math\"><sub>3</sub></span> systems behaving as high quality (i.e. with an impedance phase between -80° and -90°) capacitive structures, in the frequency range 6KHz - 50KHz and with a residual polarization equal to 2.5 µC/cm<span class=\"etd-inline-math\"><sup>2</sup></span> have been fabricated on 400 nm thick MgO sacrificial layer. These structures allow to design micro-cantilevers with a minimum resonance frequency of 6KHz. Two piezoelectric modes are generally used in energy harvesting devices, they are the 33 and the 31 piezoelectric mode. X-ray diffraction analysis shows that the polar axis of BaTiO<span class=\"etd-inline-math\"><sub>3</sub></span> is perpendicular to the surface of the film when this layer is grown on SrRuO<span class=\"etd-inline-math\"><sub>3</sub></span> and SrTiO<span class=\"etd-inline-math\"><sub>3</sub></span>. This configuration fits the 31 energy harvesting mode. When BaTiO<span class=\"etd-inline-math\"><sub>3</sub></span> is grown on MgO the polar axis is parallel to the surface of the film so this configuration fits the33 energy harvesting mode. Micro-cantilevers employing YBa<span class=\"etd-inline-math\"><sub>2</sub></span>Cu<span class=\"etd-inline-math\"><sub>3</sub></span>O<span class=\"etd-inline-math\"><sub>7</sub></span> and MgO sacrificial layers have been fabricated with a technology developed for the fabrication of Nb/Au/YBa<span class=\"etd-inline-math\"><sub>2</sub></span>Cu<span class=\"etd-inline-math\"><sub>3</sub></span>O<span class=\"etd-inline-math\"><sub>7</sub></span> ramp type Josephson junctions.","abstract_has_math":true,"creators":["Vasta, Giuseppe"],"institution":"University of Birmingham","degree_name":"d_ph","degree_level":"d_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2012,"date_issued":"2012-07","date_published":"2012-07","updated_at":"2026-11-19T09:27:05Z","subjects":["TJ Mechanical engineering and machinery","TK Electrical engineering. Electronics Nuclear engineering"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/3217/1/Vasta12PhD.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A3217","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["na"]},{"key":"dc:creator","label":"Author","values":["Vasta, Giuseppe"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2012-07"]},{"key":"dc:date.issued","label":"Date","values":["2012-07"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Engineering, Department of Electronic, Electrical and Systems Engineering"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/3217/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["d_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["d_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TJ Mechanical engineering and machinery","TK Electrical engineering. Electronics Nuclear engineering"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/3217/1/Vasta12PhD.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["The aim of this Phd is to investigate the properties of micro-cantilevers, containing BaTiO\\(_3\\) based capacitors on their top and verify if they can be used as energy harvesting devices. SrRuO\\(_3\\)/BaTiO\\(_3\\) systems behaving as high quality (i.e. with an impedance phase between -80° and -90°) capacitive structures, in the frequency range 6KHz - 50KHz and with a residual polarization equal to 2.5 µC/cm\\(^2\\) have been fabricated on 400 nm thick MgO sacrificial layer. These structures allow to design micro-cantilevers with a minimum resonance frequency of 6KHz. Two piezoelectric modes are generally used in energy harvesting devices, they are the 33 and the 31 piezoelectric mode. X-ray diffraction analysis shows that the polar axis of BaTiO\\(_3\\) is perpendicular to the surface of the film when this layer is grown on SrRuO\\(_3\\) and SrTiO\\(_3\\). This configuration fits the 31 energy harvesting mode. When BaTiO\\(_3\\) is grown on MgO the polar axis is parallel to the surface of the film so this configuration fits the33 energy harvesting mode. Micro-cantilevers employing YBa\\(_2\\)Cu\\(_3\\)O\\(_7\\) and MgO sacrificial layers have been fabricated with a technology developed for the fabrication of Nb/Au/YBa\\(_2\\)Cu\\(_3\\)O\\(_7\\) ramp type Josephson junctions."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public"]},{"key":"dc:title","label":"Title","values":["Applications of perovskite oxide thin films: microcantilevers, superconducting devices and dielectric interconnections"]}]}],"canonical_facts":{"dc:contributor.sponsor":["na"],"dc:creator":["Vasta, Giuseppe"],"dc:date":["2012-07"],"dc:date.issued":["2012-07"],"dc:description.abstract":["The aim of this Phd is to investigate the properties of micro-cantilevers, containing BaTiO\\(_3\\) based capacitors on their top and verify if they can be used as energy harvesting devices. SrRuO\\(_3\\)/BaTiO\\(_3\\) systems behaving as high quality (i.e. with an impedance phase between -80° and -90°) capacitive structures, in the frequency range 6KHz - 50KHz and with a residual polarization equal to 2.5 µC/cm\\(^2\\) have been fabricated on 400 nm thick MgO sacrificial layer. These structures allow to design micro-cantilevers with a minimum resonance frequency of 6KHz. Two piezoelectric modes are generally used in energy harvesting devices, they are the 33 and the 31 piezoelectric mode. X-ray diffraction analysis shows that the polar axis of BaTiO\\(_3\\) is perpendicular to the surface of the film when this layer is grown on SrRuO\\(_3\\) and SrTiO\\(_3\\). This configuration fits the 31 energy harvesting mode. When BaTiO\\(_3\\) is grown on MgO the polar axis is parallel to the surface of the film so this configuration fits the33 energy harvesting mode. Micro-cantilevers employing YBa\\(_2\\)Cu\\(_3\\)O\\(_7\\) and MgO sacrificial layers have been fabricated with a technology developed for the fabrication of Nb/Au/YBa\\(_2\\)Cu\\(_3\\)O\\(_7\\) ramp type Josephson junctions."],"dc:format":["application/pdf"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/3217/1/Vasta12PhD.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Engineering, Department of Electronic, Electrical and Systems Engineering"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/3217/"],"dc:subject":["TJ Mechanical engineering and machinery","TK Electrical engineering. Electronics Nuclear engineering"],"dcterms:accessrights":["public"],"dc:title":["Applications of perovskite oxide thin films: microcantilevers, superconducting devices and dielectric interconnections"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["d_ph"],"dc:type.qualificationname":["d_ph"]},"updated_at":"2026-11-19T09:27:05Z"}