{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:3716"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:3716","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"Stiffness variation in hockey sticks and the impact on stick performance","abstract":"Multiple sectioned shafts of carbon fibre composite were modelled using Composite Design Analysis software in order to replicate the range of flexural rigidities shown across the current field hockey stick market. The shafts were then manufactured using hand lay-up and hot-pressing techniques, tested under static and dynamic conditions and the goodness of their relationship with the modelled behaviour was assessed. The shafts were also analysed microscopically for volume fraction, ply-orientation and the interaction between the varied lay-up sections. The modelling gave a good understanding of the trend of behaviour that was to be expected, but was not accurate enough to predict experimental values. It is possible to create multiple sectioned CFRP shafts that can be controlled for overall flexural rigidity and also strain distribution or “kick-point”. The hand lay-up and hot pressing technique produces consistent volume fraction and accurate fibre orientation, however the seams at which the sections join requires further investigation and development. The relationship between stick stiffness and ball speed validated previous research, stiffer shafts produced a higher CoR in the drop ball test. There is scope to introduce this stiffness control of the bending behaviour into hockey sticks, by either material properties or section moment of area.","abstract_html":"Multiple sectioned shafts of carbon fibre composite were modelled using Composite Design Analysis software in order to replicate the range of flexural rigidities shown across the current field hockey stick market. The shafts were then manufactured using hand lay-up and hot-pressing techniques, tested under static and dynamic conditions and the goodness of their relationship with the modelled behaviour was assessed. The shafts were also analysed microscopically for volume fraction, ply-orientation and the interaction between the varied lay-up sections. The modelling gave a good understanding of the trend of behaviour that was to be expected, but was not accurate enough to predict experimental values. It is possible to create multiple sectioned CFRP shafts that can be controlled for overall flexural rigidity and also strain distribution or “kick-point”. The hand lay-up and hot pressing technique produces consistent volume fraction and accurate fibre orientation, however the seams at which the sections join requires further investigation and development. The relationship between stick stiffness and ball speed validated previous research, stiffer shafts produced a higher CoR in the drop ball test. There is scope to introduce this stiffness control of the bending behaviour into hockey sticks, by either material properties or section moment of area.","abstract_has_math":false,"creators":["Carlisle, Graeme Nigel"],"institution":"University of Birmingham","degree_name":"m_ph","degree_level":"m_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2012,"date_issued":"2012-12","date_published":"2012-12","updated_at":"2026-11-19T09:27:20Z","subjects":["TJ Mechanical engineering and machinery","TS Manufactures"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/3716/1/Carlisle12MRes.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A3716","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["na"]},{"key":"dc:creator","label":"Author","values":["Carlisle, Graeme Nigel"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2012-12-01"]},{"key":"dc:date.issued","label":"Date","values":["2012-12"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/3716/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["m_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["m_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TJ Mechanical engineering and machinery","TS Manufactures"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/3716/1/Carlisle12MRes.pdf","http://etheses.bham.ac.uk//id/eprint/3716/2/Decl_IS_Carisle12MRes.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Multiple sectioned shafts of carbon fibre composite were modelled using Composite Design Analysis software in order to replicate the range of flexural rigidities shown across the current field hockey stick market. The shafts were then manufactured using hand lay-up and hot-pressing techniques, tested under static and dynamic conditions and the goodness of their relationship with the modelled behaviour was assessed. The shafts were also analysed microscopically for volume fraction, ply-orientation and the interaction between the varied lay-up sections. The modelling gave a good understanding of the trend of behaviour that was to be expected, but was not accurate enough to predict experimental values. It is possible to create multiple sectioned CFRP shafts that can be controlled for overall flexural rigidity and also strain distribution or “kick-point”. The hand lay-up and hot pressing technique produces consistent volume fraction and accurate fibre orientation, however the seams at which the sections join requires further investigation and development. The relationship between stick stiffness and ball speed validated previous research, stiffer shafts produced a higher CoR in the drop ball test. There is scope to introduce this stiffness control of the bending behaviour into hockey sticks, by either material properties or section moment of area."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public","staffonly"]},{"key":"dc:title","label":"Title","values":["Stiffness variation in hockey sticks and the impact on stick performance"]}]}],"canonical_facts":{"dc:contributor.sponsor":["na"],"dc:creator":["Carlisle, Graeme Nigel"],"dc:date":["2012-12-01"],"dc:date.issued":["2012-12"],"dc:description.abstract":["Multiple sectioned shafts of carbon fibre composite were modelled using Composite Design Analysis software in order to replicate the range of flexural rigidities shown across the current field hockey stick market. The shafts were then manufactured using hand lay-up and hot-pressing techniques, tested under static and dynamic conditions and the goodness of their relationship with the modelled behaviour was assessed. The shafts were also analysed microscopically for volume fraction, ply-orientation and the interaction between the varied lay-up sections. The modelling gave a good understanding of the trend of behaviour that was to be expected, but was not accurate enough to predict experimental values. It is possible to create multiple sectioned CFRP shafts that can be controlled for overall flexural rigidity and also strain distribution or “kick-point”. The hand lay-up and hot pressing technique produces consistent volume fraction and accurate fibre orientation, however the seams at which the sections join requires further investigation and development. The relationship between stick stiffness and ball speed validated previous research, stiffer shafts produced a higher CoR in the drop ball test. There is scope to introduce this stiffness control of the bending behaviour into hockey sticks, by either material properties or section moment of area."],"dc:format":["application/pdf"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/3716/1/Carlisle12MRes.pdf","http://etheses.bham.ac.uk//id/eprint/3716/2/Decl_IS_Carisle12MRes.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/3716/"],"dc:subject":["TJ Mechanical engineering and machinery","TS Manufactures"],"dcterms:accessrights":["public","staffonly"],"dc:title":["Stiffness variation in hockey sticks and the impact on stick performance"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["m_ph"],"dc:type.qualificationname":["m_ph"]},"updated_at":"2026-11-19T09:27:20Z"}