{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:4254"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:4254","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"Development and characterisation of nano-multilayer CrAlSiN coating systems for cutting tools","abstract":"Two types of CrAlSiN nano-multilayer coating were designed and synthesised on AISI M2 high speed steel. Selected coatings were also deposited on pre-nitrided M2 substrate to investigate the effect of duplex treatment. A series of type I CrAlSiN coatings, which have sharp interfaces between individual nano-layers, were designed with varying bilayer thickness. An fcc and an hcp phase were identified for all type I coatings, and it has been found that the bilayer thickness has a significant influence on the orientation of both phases, which in turn affects their mechanical properties. Type II CrAlSiN coatings, with blurred interfaces, were synthesised with a medium bilayer thickness. Due to the insignificant difference in composition between neighbouring nano-layers, only one fcc phase was found in type II CrAlSiN coating. The wear resistance of the new nano-multilayer CrAlSiN coating is about 10 times higher than CrN when tested at room and elevated temperatures. This could be attributed to high H/E ratio and good oxidation resistance conferred by the nano-multilayer structure and multi-component composition. It is also found that duplex treatment can improve the wear resistance of nano-multilayer coating by two orders of magnitude due to the improved load bearing capacity of the coating system.","abstract_html":"Two types of CrAlSiN nano-multilayer coating were designed and synthesised on AISI M2 high speed steel. Selected coatings were also deposited on pre-nitrided M2 substrate to investigate the effect of duplex treatment. A series of type I CrAlSiN coatings, which have sharp interfaces between individual nano-layers, were designed with varying bilayer thickness. An fcc and an hcp phase were identified for all type I coatings, and it has been found that the bilayer thickness has a significant influence on the orientation of both phases, which in turn affects their mechanical properties. Type II CrAlSiN coatings, with blurred interfaces, were synthesised with a medium bilayer thickness. Due to the insignificant difference in composition between neighbouring nano-layers, only one fcc phase was found in type II CrAlSiN coating. The wear resistance of the new nano-multilayer CrAlSiN coating is about 10 times higher than CrN when tested at room and elevated temperatures. This could be attributed to high H/E ratio and good oxidation resistance conferred by the nano-multilayer structure and multi-component composition. It is also found that duplex treatment can improve the wear resistance of nano-multilayer coating by two orders of magnitude due to the improved load bearing capacity of the coating system.","abstract_has_math":false,"creators":["Ji, Ran"],"institution":"University of Birmingham","degree_name":"d_ph","degree_level":"d_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2013,"date_issued":"2013-07","date_published":"2013-07","updated_at":"2026-11-19T09:27:36Z","subjects":["T Technology (General)","TJ Mechanical engineering and machinery"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/4254/1/Ji13Phd.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A4254","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["european_commission"]},{"key":"dc:creator","label":"Author","values":["Ji, Ran"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2013-07"]},{"key":"dc:date.issued","label":"Date","values":["2013-07"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/4254/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["d_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["d_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["T Technology (General)","TJ Mechanical engineering and machinery"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/4254/1/Ji13Phd.pdf","http://etheses.bham.ac.uk//id/eprint/4254/2/Decl_IS_Ji13PhD.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Two types of CrAlSiN nano-multilayer coating were designed and synthesised on AISI M2 high speed steel. Selected coatings were also deposited on pre-nitrided M2 substrate to investigate the effect of duplex treatment. A series of type I CrAlSiN coatings, which have sharp interfaces between individual nano-layers, were designed with varying bilayer thickness. An fcc and an hcp phase were identified for all type I coatings, and it has been found that the bilayer thickness has a significant influence on the orientation of both phases, which in turn affects their mechanical properties. Type II CrAlSiN coatings, with blurred interfaces, were synthesised with a medium bilayer thickness. Due to the insignificant difference in composition between neighbouring nano-layers, only one fcc phase was found in type II CrAlSiN coating. The wear resistance of the new nano-multilayer CrAlSiN coating is about 10 times higher than CrN when tested at room and elevated temperatures. This could be attributed to high H/E ratio and good oxidation resistance conferred by the nano-multilayer structure and multi-component composition. It is also found that duplex treatment can improve the wear resistance of nano-multilayer coating by two orders of magnitude due to the improved load bearing capacity of the coating system."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public","staffonly"]},{"key":"dc:title","label":"Title","values":["Development and characterisation of nano-multilayer CrAlSiN coating systems for cutting tools"]}]}],"canonical_facts":{"dc:contributor.sponsor":["european_commission"],"dc:creator":["Ji, Ran"],"dc:date":["2013-07"],"dc:date.issued":["2013-07"],"dc:description.abstract":["Two types of CrAlSiN nano-multilayer coating were designed and synthesised on AISI M2 high speed steel. Selected coatings were also deposited on pre-nitrided M2 substrate to investigate the effect of duplex treatment. A series of type I CrAlSiN coatings, which have sharp interfaces between individual nano-layers, were designed with varying bilayer thickness. An fcc and an hcp phase were identified for all type I coatings, and it has been found that the bilayer thickness has a significant influence on the orientation of both phases, which in turn affects their mechanical properties. Type II CrAlSiN coatings, with blurred interfaces, were synthesised with a medium bilayer thickness. Due to the insignificant difference in composition between neighbouring nano-layers, only one fcc phase was found in type II CrAlSiN coating. The wear resistance of the new nano-multilayer CrAlSiN coating is about 10 times higher than CrN when tested at room and elevated temperatures. This could be attributed to high H/E ratio and good oxidation resistance conferred by the nano-multilayer structure and multi-component composition. It is also found that duplex treatment can improve the wear resistance of nano-multilayer coating by two orders of magnitude due to the improved load bearing capacity of the coating system."],"dc:format":["application/pdf"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/4254/1/Ji13Phd.pdf","http://etheses.bham.ac.uk//id/eprint/4254/2/Decl_IS_Ji13PhD.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/4254/"],"dc:subject":["T Technology (General)","TJ Mechanical engineering and machinery"],"dcterms:accessrights":["public","staffonly"],"dc:title":["Development and characterisation of nano-multilayer CrAlSiN coating systems for cutting tools"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["d_ph"],"dc:type.qualificationname":["d_ph"]},"updated_at":"2026-11-19T09:27:36Z"}