{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:4410"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:4410","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"Selective laser melting of nickel superalloys for high temperature applications","abstract":"Selective Laser Melting (SLM) as a method of netshape manufacture is of growing interest within the aerospace industry. There is currently a lack of understanding of the influence of process variables on the integrity and properties of the as fabricated material. The research presented investigates the SLM fabrication of three nickel superalloys: Primarily CM247LC and CMSX486/IN625 as secondary alloys. CM247LC is Ni-base superalloy hardenable by the precipitation of the coherent \\(\\gamma\\)'phase. It presents a particular challenge due to weld-crack susceptibility. This research aims to establish a processing route for CM247LC components via SLM: Parametric studies are presented to quantitatively assess the cracking behaviour based on microstructural observations; Hot Isostatic Pressing HIPping) has been investigated as a retro-fix solution to cracking; Electron BackScatter Diffraction (EBSD), MicroCT Tomography and microscopy have been used to characterise the SLM microstructure. The \\(\\gamma\\)' evolution through the manufacturing stages (SLM & Heat Treatment) has been examined. Mechanical testing creep/tensile) was performed for comparison against cast material. Research was extended to two additional alloys: CMSX486 and IN625. Statistical design of experiments methodology was used to rapidly establish process parameters for these two alloys and assess them by mechanical testing. In conclusion a processing route capable of yielding fully dense material with a satisfactory \\(\\gamma\\)' structure is presented; however, it involves significant post-fabrication processing which reduces the attractiveness of SLM. Further research is suggested, specifically into modelling and thermal measurement of SLM","abstract_html":"Selective Laser Melting (SLM) as a method of netshape manufacture is of growing interest within the aerospace industry. There is currently a lack of understanding of the influence of process variables on the integrity and properties of the as fabricated material. The research presented investigates the SLM fabrication of three nickel superalloys: Primarily CM247LC and CMSX486/IN625 as secondary alloys. CM247LC is Ni-base superalloy hardenable by the precipitation of the coherent <span class=\"etd-inline-math\">&gamma;</span>&#x27;phase. It presents a particular challenge due to weld-crack susceptibility. This research aims to establish a processing route for CM247LC components via SLM: Parametric studies are presented to quantitatively assess the cracking behaviour based on microstructural observations; Hot Isostatic Pressing HIPping) has been investigated as a retro-fix solution to cracking; Electron BackScatter Diffraction (EBSD), MicroCT Tomography and microscopy have been used to characterise the SLM microstructure. The <span class=\"etd-inline-math\">&gamma;</span>&#x27; evolution through the manufacturing stages (SLM &amp; Heat Treatment) has been examined. Mechanical testing creep/tensile) was performed for comparison against cast material. Research was extended to two additional alloys: CMSX486 and IN625. Statistical design of experiments methodology was used to rapidly establish process parameters for these two alloys and assess them by mechanical testing. In conclusion a processing route capable of yielding fully dense material with a satisfactory <span class=\"etd-inline-math\">&gamma;</span>&#x27; structure is presented; however, it involves significant post-fabrication processing which reduces the attractiveness of SLM. Further research is suggested, specifically into modelling and thermal measurement of SLM","abstract_has_math":true,"creators":["Carter, Luke Nelson"],"institution":"University of Birmingham","degree_name":"d_ph","degree_level":"d_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2013,"date_issued":"2013-12","date_published":"2013-12","updated_at":"2026-11-19T09:27:39Z","subjects":["TJ Mechanical engineering and machinery"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/4410/2/Carter13PhD.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A4410","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["na"]},{"key":"dc:creator","label":"Author","values":["Carter, Luke Nelson"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2013-12-01"]},{"key":"dc:date.issued","label":"Date","values":["2013-12"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/4410/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["d_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["d_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TJ Mechanical engineering and machinery"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/4410/2/Carter13PhD.pdf","http://etheses.bham.ac.uk//id/eprint/4410/1/Decl_IS_Carter13PhD.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Selective Laser Melting (SLM) as a method of netshape manufacture is of growing interest within the aerospace industry. There is currently a lack of understanding of the influence of process variables on the integrity and properties of the as fabricated material. The research presented investigates the SLM fabrication of three nickel superalloys: Primarily CM247LC and CMSX486/IN625 as secondary alloys. CM247LC is Ni-base superalloy hardenable by the precipitation of the coherent \\(\\gamma\\)'phase. It presents a particular challenge due to weld-crack susceptibility. This research aims to establish a processing route for CM247LC components via SLM: Parametric studies are presented to quantitatively assess the cracking behaviour based on microstructural observations; Hot Isostatic Pressing HIPping) has been investigated as a retro-fix solution to cracking; Electron BackScatter Diffraction (EBSD), MicroCT Tomography and microscopy have been used to characterise the SLM microstructure. The \\(\\gamma\\)' evolution through the manufacturing stages (SLM & Heat Treatment) has been examined. Mechanical testing creep/tensile) was performed for comparison against cast material. Research was extended to two additional alloys: CMSX486 and IN625. Statistical design of experiments methodology was used to rapidly establish process parameters for these two alloys and assess them by mechanical testing. In conclusion a processing route capable of yielding fully dense material with a satisfactory \\(\\gamma\\)' structure is presented; however, it involves significant post-fabrication processing which reduces the attractiveness of SLM. Further research is suggested, specifically into modelling and thermal measurement of SLM"]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public","staffonly"]},{"key":"dc:title","label":"Title","values":["Selective laser melting of nickel superalloys for high temperature applications"]}]}],"canonical_facts":{"dc:contributor.sponsor":["na"],"dc:creator":["Carter, Luke Nelson"],"dc:date":["2013-12-01"],"dc:date.issued":["2013-12"],"dc:description.abstract":["Selective Laser Melting (SLM) as a method of netshape manufacture is of growing interest within the aerospace industry. There is currently a lack of understanding of the influence of process variables on the integrity and properties of the as fabricated material. The research presented investigates the SLM fabrication of three nickel superalloys: Primarily CM247LC and CMSX486/IN625 as secondary alloys. CM247LC is Ni-base superalloy hardenable by the precipitation of the coherent \\(\\gamma\\)'phase. It presents a particular challenge due to weld-crack susceptibility. This research aims to establish a processing route for CM247LC components via SLM: Parametric studies are presented to quantitatively assess the cracking behaviour based on microstructural observations; Hot Isostatic Pressing HIPping) has been investigated as a retro-fix solution to cracking; Electron BackScatter Diffraction (EBSD), MicroCT Tomography and microscopy have been used to characterise the SLM microstructure. The \\(\\gamma\\)' evolution through the manufacturing stages (SLM & Heat Treatment) has been examined. Mechanical testing creep/tensile) was performed for comparison against cast material. Research was extended to two additional alloys: CMSX486 and IN625. Statistical design of experiments methodology was used to rapidly establish process parameters for these two alloys and assess them by mechanical testing. In conclusion a processing route capable of yielding fully dense material with a satisfactory \\(\\gamma\\)' structure is presented; however, it involves significant post-fabrication processing which reduces the attractiveness of SLM. Further research is suggested, specifically into modelling and thermal measurement of SLM"],"dc:format":["application/pdf"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/4410/2/Carter13PhD.pdf","http://etheses.bham.ac.uk//id/eprint/4410/1/Decl_IS_Carter13PhD.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/4410/"],"dc:subject":["TJ Mechanical engineering and machinery"],"dcterms:accessrights":["public","staffonly"],"dc:title":["Selective laser melting of nickel superalloys for high temperature applications"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["d_ph"],"dc:type.qualificationname":["d_ph"]},"updated_at":"2026-11-19T09:27:39Z"}