{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:4699"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:4699","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"Spray, combustion and emission characteristics of dieseline fuel","abstract":"The spray, combustion and emissions characteristics of diesel and gasoline blends (dieseline) were studied. Experimental results showed that the dieseline fuel spray had tip penetration length similar as diesel. With an increase of the gasoline/diesel blending ratio, the fuel droplets size decreased. When operating with dieseline, the engine's PM emissions were much lower than diesel. With advanced injection timing and large amounts of EGR, both the NOx and PM emissions of dieseline combustion were reduced significantly at part loads. Using split injection strategies gave even more flexibility for the control of mixing strength and combustion phasing. However, the power density of dieseline fuelled PPCI operation was limited. A novel concept, Stoichiometric Dual-fuel Compression Ignition (SDCI) was investigated. The diesel and gasoline were blended internally through direct injection and port fuel injection respectively. Stoichiometric condition was maintained through adjusting the EGR ratio, which thus allows for a three-way-catalyst to handle gaseous emissions. Experimental results showed that the SDCI combustion can achieve better thermal efficiency and lower PM emissions than conventional diesel combustion. Overall, the SDCI concept was proved to be a promising technique for optimising a CI engine's efficiency, emissions and noise without compromise of cost and power density.","abstract_html":"The spray, combustion and emissions characteristics of diesel and gasoline blends (dieseline) were studied. Experimental results showed that the dieseline fuel spray had tip penetration length similar as diesel. With an increase of the gasoline/diesel blending ratio, the fuel droplets size decreased. When operating with dieseline, the engine&#x27;s PM emissions were much lower than diesel. With advanced injection timing and large amounts of EGR, both the NOx and PM emissions of dieseline combustion were reduced significantly at part loads. Using split injection strategies gave even more flexibility for the control of mixing strength and combustion phasing. However, the power density of dieseline fuelled PPCI operation was limited. A novel concept, Stoichiometric Dual-fuel Compression Ignition (SDCI) was investigated. The diesel and gasoline were blended internally through direct injection and port fuel injection respectively. Stoichiometric condition was maintained through adjusting the EGR ratio, which thus allows for a three-way-catalyst to handle gaseous emissions. Experimental results showed that the SDCI combustion can achieve better thermal efficiency and lower PM emissions than conventional diesel combustion. Overall, the SDCI concept was proved to be a promising technique for optimising a CI engine&#x27;s efficiency, emissions and noise without compromise of cost and power density.","abstract_has_math":false,"creators":["Zhang, Fan"],"institution":"University of Birmingham","degree_name":"d_ph","degree_level":"d_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2013,"date_issued":"2013-12","date_published":"2013-12","updated_at":"2026-11-19T09:27:48Z","subjects":["TA Engineering (General). Civil engineering (General)"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/4699/1/Zhang13PhD.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A4699","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["na"]},{"key":"dc:creator","label":"Author","values":["Zhang, Fan"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2013-12"]},{"key":"dc:date.issued","label":"Date","values":["2013-12"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Engineering"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/4699/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["d_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["d_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TA Engineering (General). Civil engineering (General)"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/4699/1/Zhang13PhD.pdf","http://etheses.bham.ac.uk//id/eprint/4699/2/Decl_IS_Zhang13PhD.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["The spray, combustion and emissions characteristics of diesel and gasoline blends (dieseline) were studied. Experimental results showed that the dieseline fuel spray had tip penetration length similar as diesel. With an increase of the gasoline/diesel blending ratio, the fuel droplets size decreased. When operating with dieseline, the engine's PM emissions were much lower than diesel. With advanced injection timing and large amounts of EGR, both the NOx and PM emissions of dieseline combustion were reduced significantly at part loads. Using split injection strategies gave even more flexibility for the control of mixing strength and combustion phasing. However, the power density of dieseline fuelled PPCI operation was limited. A novel concept, Stoichiometric Dual-fuel Compression Ignition (SDCI) was investigated. The diesel and gasoline were blended internally through direct injection and port fuel injection respectively. Stoichiometric condition was maintained through adjusting the EGR ratio, which thus allows for a three-way-catalyst to handle gaseous emissions. Experimental results showed that the SDCI combustion can achieve better thermal efficiency and lower PM emissions than conventional diesel combustion. Overall, the SDCI concept was proved to be a promising technique for optimising a CI engine's efficiency, emissions and noise without compromise of cost and power density."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public","staffonly"]},{"key":"dc:title","label":"Title","values":["Spray, combustion and emission characteristics of dieseline fuel"]}]}],"canonical_facts":{"dc:contributor.sponsor":["na"],"dc:creator":["Zhang, Fan"],"dc:date":["2013-12"],"dc:date.issued":["2013-12"],"dc:description.abstract":["The spray, combustion and emissions characteristics of diesel and gasoline blends (dieseline) were studied. Experimental results showed that the dieseline fuel spray had tip penetration length similar as diesel. With an increase of the gasoline/diesel blending ratio, the fuel droplets size decreased. When operating with dieseline, the engine's PM emissions were much lower than diesel. With advanced injection timing and large amounts of EGR, both the NOx and PM emissions of dieseline combustion were reduced significantly at part loads. Using split injection strategies gave even more flexibility for the control of mixing strength and combustion phasing. However, the power density of dieseline fuelled PPCI operation was limited. A novel concept, Stoichiometric Dual-fuel Compression Ignition (SDCI) was investigated. The diesel and gasoline were blended internally through direct injection and port fuel injection respectively. Stoichiometric condition was maintained through adjusting the EGR ratio, which thus allows for a three-way-catalyst to handle gaseous emissions. Experimental results showed that the SDCI combustion can achieve better thermal efficiency and lower PM emissions than conventional diesel combustion. Overall, the SDCI concept was proved to be a promising technique for optimising a CI engine's efficiency, emissions and noise without compromise of cost and power density."],"dc:format":["application/pdf"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/4699/1/Zhang13PhD.pdf","http://etheses.bham.ac.uk//id/eprint/4699/2/Decl_IS_Zhang13PhD.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Engineering"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/4699/"],"dc:subject":["TA Engineering (General). Civil engineering (General)"],"dcterms:accessrights":["public","staffonly"],"dc:title":["Spray, combustion and emission characteristics of dieseline fuel"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["d_ph"],"dc:type.qualificationname":["d_ph"]},"updated_at":"2026-11-19T09:27:48Z"}