{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:4705"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:4705","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"Production of aligned short-fibre composites","abstract":"This study investigated a manufacturing process to align short-fibres using a custom-made fibre chopper system. With this technique, continuous waste fibres are chopped, aligned and deposited onto an adhesive substrate to produce aligned short-fibre prepregs. Experimental methods were developed to address issues associated with calibration, a blade inspection criteria and the optimisation of producing parameters to achieve at least 60% fibre alignment in the prepreg. In order to ensure that the quality and the consistency of the chopped fibre ends were maintained, a criteria was developed to specify when the blade or the fibre chopper should be replaced. This production technique was used to manufacture 8-ply composites using the aligned short-fibre prepregs. Continuous fibre prepregs were also used to manufacture reference composites for comparison purposes. Non-destructive testing via visual inspection and ultrasonic c-scanning was used to determine the quality of the composites. The physical and mechanical properties of the composite were established using conventional test methods. The main conclusions reached were: (i) The fibre-chopper-based technique developed in this study was capable of producing aligned glass and carbon short-fibre prepregs. (ii) The degree of fibre alignment was approximately 70%. (iii) The fibre volume fraction was found to be approximately 60%. (iv) The Young's Modulus of the aligned glass short-fibre composite was 33 GPa ; in comparison, the corresponding value for the continuous fibre composite was 39 GPa.","abstract_html":"This study investigated a manufacturing process to align short-fibres using a custom-made fibre chopper system. With this technique, continuous waste fibres are chopped, aligned and deposited onto an adhesive substrate to produce aligned short-fibre prepregs. Experimental methods were developed to address issues associated with calibration, a blade inspection criteria and the optimisation of producing parameters to achieve at least 60% fibre alignment in the prepreg. In order to ensure that the quality and the consistency of the chopped fibre ends were maintained, a criteria was developed to specify when the blade or the fibre chopper should be replaced. This production technique was used to manufacture 8-ply composites using the aligned short-fibre prepregs. Continuous fibre prepregs were also used to manufacture reference composites for comparison purposes. Non-destructive testing via visual inspection and ultrasonic c-scanning was used to determine the quality of the composites. The physical and mechanical properties of the composite were established using conventional test methods. The main conclusions reached were: (i) The fibre-chopper-based technique developed in this study was capable of producing aligned glass and carbon short-fibre prepregs. (ii) The degree of fibre alignment was approximately 70%. (iii) The fibre volume fraction was found to be approximately 60%. (iv) The Young&#x27;s Modulus of the aligned glass short-fibre composite was 33 GPa ; in comparison, the corresponding value for the continuous fibre composite was 39 GPa.","abstract_has_math":false,"creators":["Jameson, Nicola"],"institution":"University of Birmingham","degree_name":"m_rs","degree_level":"m_rs","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2014,"date_issued":"2014-12","date_published":"2014-12","updated_at":"2026-11-19T09:27:48Z","subjects":["TN Mining engineering. Metallurgy"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/4705/1/Jameson14MRes.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A4705","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["na"]},{"key":"dc:creator","label":"Author","values":["Jameson, Nicola"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2014-12"]},{"key":"dc:date.issued","label":"Date","values":["2014-12"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/4705/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["m_rs"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["m_rs"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TN Mining engineering. Metallurgy"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/4705/1/Jameson14MRes.pdf","http://etheses.bham.ac.uk//id/eprint/4705/2/Decl_IS_Jameson14MRes.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["This study investigated a manufacturing process to align short-fibres using a custom-made fibre chopper system. With this technique, continuous waste fibres are chopped, aligned and deposited onto an adhesive substrate to produce aligned short-fibre prepregs. Experimental methods were developed to address issues associated with calibration, a blade inspection criteria and the optimisation of producing parameters to achieve at least 60% fibre alignment in the prepreg. In order to ensure that the quality and the consistency of the chopped fibre ends were maintained, a criteria was developed to specify when the blade or the fibre chopper should be replaced. This production technique was used to manufacture 8-ply composites using the aligned short-fibre prepregs. Continuous fibre prepregs were also used to manufacture reference composites for comparison purposes. Non-destructive testing via visual inspection and ultrasonic c-scanning was used to determine the quality of the composites. The physical and mechanical properties of the composite were established using conventional test methods. The main conclusions reached were: (i) The fibre-chopper-based technique developed in this study was capable of producing aligned glass and carbon short-fibre prepregs. (ii) The degree of fibre alignment was approximately 70%. (iii) The fibre volume fraction was found to be approximately 60%. (iv) The Young's Modulus of the aligned glass short-fibre composite was 33 GPa ; in comparison, the corresponding value for the continuous fibre composite was 39 GPa."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public","staffonly"]},{"key":"dc:title","label":"Title","values":["Production of aligned short-fibre composites"]}]}],"canonical_facts":{"dc:contributor.sponsor":["na"],"dc:creator":["Jameson, Nicola"],"dc:date":["2014-12"],"dc:date.issued":["2014-12"],"dc:description.abstract":["This study investigated a manufacturing process to align short-fibres using a custom-made fibre chopper system. With this technique, continuous waste fibres are chopped, aligned and deposited onto an adhesive substrate to produce aligned short-fibre prepregs. Experimental methods were developed to address issues associated with calibration, a blade inspection criteria and the optimisation of producing parameters to achieve at least 60% fibre alignment in the prepreg. In order to ensure that the quality and the consistency of the chopped fibre ends were maintained, a criteria was developed to specify when the blade or the fibre chopper should be replaced. This production technique was used to manufacture 8-ply composites using the aligned short-fibre prepregs. Continuous fibre prepregs were also used to manufacture reference composites for comparison purposes. Non-destructive testing via visual inspection and ultrasonic c-scanning was used to determine the quality of the composites. The physical and mechanical properties of the composite were established using conventional test methods. The main conclusions reached were: (i) The fibre-chopper-based technique developed in this study was capable of producing aligned glass and carbon short-fibre prepregs. (ii) The degree of fibre alignment was approximately 70%. (iii) The fibre volume fraction was found to be approximately 60%. (iv) The Young's Modulus of the aligned glass short-fibre composite was 33 GPa ; in comparison, the corresponding value for the continuous fibre composite was 39 GPa."],"dc:format":["application/pdf"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/4705/1/Jameson14MRes.pdf","http://etheses.bham.ac.uk//id/eprint/4705/2/Decl_IS_Jameson14MRes.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/4705/"],"dc:subject":["TN Mining engineering. Metallurgy"],"dcterms:accessrights":["public","staffonly"],"dc:title":["Production of aligned short-fibre composites"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["m_rs"],"dc:type.qualificationname":["m_rs"]},"updated_at":"2026-11-19T09:27:48Z"}