{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:4752"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:4752","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"Processing of organic waste by catalytic supercritical water gasification","abstract":"The results of the degradation of glycerol in supercritical water show that conversion of pure glycerol (58 % at 550 \\(^0\\)C) without a catalyst can be achieved, but complete conversion of pure glycerol over Fe\\(_2\\)O\\(_3\\)+Cr\\(_2\\)O\\(_3\\) or Fe\\(_3\\)O\\(_4\\) catalysts (at 550\\(^0\\)C, 250 barg, <15 wt% feed concentration, 10.1 g and 4 mm catalyst particles) can be reached. Crude glycerol conversion decreases from 100 to 67 mole% and 100 to 74 mole% over the same catalysts and conditions. Hydrogen yield was as high as 61 mole% and 49 mole % when crude glycerol was gasified over Fe\\(_3\\)O\\(_4\\) and Fe\\(_2\\)O\\(_3\\)+Cr\\(_2\\)O\\(_3\\), respectively. 64 mole% of syngas was obtained with minimum 4:1 mole ratio of H\\(_2\\):CO. Hydrocarbon yields (69 mole% for ethylene and 22 mole% for methane) were obtained and this decreased with temperature as resulted of thermal cracking. Small amounts of char (<3.1 wt%) and carbon deposition on the catalyst surface and inside the reactor wall was observed. Prolonged exposure of Fe\\(_2\\)O\\(_3\\)+Cr\\(_2\\)O\\(_3\\) to 172 h on-stream under supercritical conditions resulted in fragmentation of the surface from metal sintering, which reduced activity for H\\(_2\\) production. 42 mole% of hydrogen was obtained from 2 wt% digestate gasification at the same conditions.","abstract_html":"The results of the degradation of glycerol in supercritical water show that conversion of pure glycerol (58 % at 550 <span class=\"etd-inline-math\"><sup>0</sup></span>C) without a catalyst can be achieved, but complete conversion of pure glycerol over Fe<span class=\"etd-inline-math\"><sub>2</sub></span>O<span class=\"etd-inline-math\"><sub>3</sub></span>+Cr<span class=\"etd-inline-math\"><sub>2</sub></span>O<span class=\"etd-inline-math\"><sub>3</sub></span> or Fe<span class=\"etd-inline-math\"><sub>3</sub></span>O<span class=\"etd-inline-math\"><sub>4</sub></span> catalysts (at 550<span class=\"etd-inline-math\"><sup>0</sup></span>C, 250 barg, &lt;15 wt% feed concentration, 10.1 g and 4 mm catalyst particles) can be reached. Crude glycerol conversion decreases from 100 to 67 mole% and 100 to 74 mole% over the same catalysts and conditions. Hydrogen yield was as high as 61 mole% and 49 mole % when crude glycerol was gasified over Fe<span class=\"etd-inline-math\"><sub>3</sub></span>O<span class=\"etd-inline-math\"><sub>4</sub></span> and Fe<span class=\"etd-inline-math\"><sub>2</sub></span>O<span class=\"etd-inline-math\"><sub>3</sub></span>+Cr<span class=\"etd-inline-math\"><sub>2</sub></span>O<span class=\"etd-inline-math\"><sub>3</sub></span>, respectively. 64 mole% of syngas was obtained with minimum 4:1 mole ratio of H<span class=\"etd-inline-math\"><sub>2</sub></span>:CO. Hydrocarbon yields (69 mole% for ethylene and 22 mole% for methane) were obtained and this decreased with temperature as resulted of thermal cracking. Small amounts of char (&lt;3.1 wt%) and carbon deposition on the catalyst surface and inside the reactor wall was observed. Prolonged exposure of Fe<span class=\"etd-inline-math\"><sub>2</sub></span>O<span class=\"etd-inline-math\"><sub>3</sub></span>+Cr<span class=\"etd-inline-math\"><sub>2</sub></span>O<span class=\"etd-inline-math\"><sub>3</sub></span> to 172 h on-stream under supercritical conditions resulted in fragmentation of the surface from metal sintering, which reduced activity for H<span class=\"etd-inline-math\"><sub>2</sub></span> production. 42 mole% of hydrogen was obtained from 2 wt% digestate gasification at the same conditions.","abstract_has_math":true,"creators":["Tapah, Boris Fotso"],"institution":"University of Birmingham","degree_name":"d_ph","degree_level":"d_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2014,"date_issued":"2014-07","date_published":"2014-07","updated_at":"2026-11-19T09:27:51Z","subjects":["TD Environmental technology. Sanitary engineering"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/4752/1/Tapah14PhD.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A4752","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["na"]},{"key":"dc:creator","label":"Author","values":["Tapah, Boris Fotso"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2014-07"]},{"key":"dc:date.issued","label":"Date","values":["2014-07"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Chemical Engineering"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/4752/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["d_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["d_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TD Environmental technology. Sanitary engineering"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/4752/1/Tapah14PhD.pdf","http://etheses.bham.ac.uk//id/eprint/4752/5/Decl_IS_Tapah14PhD.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["The results of the degradation of glycerol in supercritical water show that conversion of pure glycerol (58 % at 550 \\(^0\\)C) without a catalyst can be achieved, but complete conversion of pure glycerol over Fe\\(_2\\)O\\(_3\\)+Cr\\(_2\\)O\\(_3\\) or Fe\\(_3\\)O\\(_4\\) catalysts (at 550\\(^0\\)C, 250 barg, <15 wt% feed concentration, 10.1 g and 4 mm catalyst particles) can be reached. Crude glycerol conversion decreases from 100 to 67 mole% and 100 to 74 mole% over the same catalysts and conditions. Hydrogen yield was as high as 61 mole% and 49 mole % when crude glycerol was gasified over Fe\\(_3\\)O\\(_4\\) and Fe\\(_2\\)O\\(_3\\)+Cr\\(_2\\)O\\(_3\\), respectively. 64 mole% of syngas was obtained with minimum 4:1 mole ratio of H\\(_2\\):CO. Hydrocarbon yields (69 mole% for ethylene and 22 mole% for methane) were obtained and this decreased with temperature as resulted of thermal cracking. Small amounts of char (<3.1 wt%) and carbon deposition on the catalyst surface and inside the reactor wall was observed. Prolonged exposure of Fe\\(_2\\)O\\(_3\\)+Cr\\(_2\\)O\\(_3\\) to 172 h on-stream under supercritical conditions resulted in fragmentation of the surface from metal sintering, which reduced activity for H\\(_2\\) production. 42 mole% of hydrogen was obtained from 2 wt% digestate gasification at the same conditions."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public","staffonly"]},{"key":"dc:title","label":"Title","values":["Processing of organic waste by catalytic supercritical water gasification"]}]}],"canonical_facts":{"dc:contributor.sponsor":["na"],"dc:creator":["Tapah, Boris Fotso"],"dc:date":["2014-07"],"dc:date.issued":["2014-07"],"dc:description.abstract":["The results of the degradation of glycerol in supercritical water show that conversion of pure glycerol (58 % at 550 \\(^0\\)C) without a catalyst can be achieved, but complete conversion of pure glycerol over Fe\\(_2\\)O\\(_3\\)+Cr\\(_2\\)O\\(_3\\) or Fe\\(_3\\)O\\(_4\\) catalysts (at 550\\(^0\\)C, 250 barg, <15 wt% feed concentration, 10.1 g and 4 mm catalyst particles) can be reached. Crude glycerol conversion decreases from 100 to 67 mole% and 100 to 74 mole% over the same catalysts and conditions. Hydrogen yield was as high as 61 mole% and 49 mole % when crude glycerol was gasified over Fe\\(_3\\)O\\(_4\\) and Fe\\(_2\\)O\\(_3\\)+Cr\\(_2\\)O\\(_3\\), respectively. 64 mole% of syngas was obtained with minimum 4:1 mole ratio of H\\(_2\\):CO. Hydrocarbon yields (69 mole% for ethylene and 22 mole% for methane) were obtained and this decreased with temperature as resulted of thermal cracking. Small amounts of char (<3.1 wt%) and carbon deposition on the catalyst surface and inside the reactor wall was observed. Prolonged exposure of Fe\\(_2\\)O\\(_3\\)+Cr\\(_2\\)O\\(_3\\) to 172 h on-stream under supercritical conditions resulted in fragmentation of the surface from metal sintering, which reduced activity for H\\(_2\\) production. 42 mole% of hydrogen was obtained from 2 wt% digestate gasification at the same conditions."],"dc:format":["application/pdf"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/4752/1/Tapah14PhD.pdf","http://etheses.bham.ac.uk//id/eprint/4752/5/Decl_IS_Tapah14PhD.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Chemical Engineering"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/4752/"],"dc:subject":["TD Environmental technology. Sanitary engineering"],"dcterms:accessrights":["public","staffonly"],"dc:title":["Processing of organic waste by catalytic supercritical water gasification"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["d_ph"],"dc:type.qualificationname":["d_ph"]},"updated_at":"2026-11-19T09:27:51Z"}