{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:4842"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:4842","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"Microstructural characterisation of pearlitic and complex phase steels using image analysis methods","abstract":"The measurement of properties is very important for both material design and quality control. As materials’ properties are determined by the microstructure of the materials such as grain size or the volume fraction of the present phases, microstructural characterisation is a powerful tool for property prediction. Unfortunately, microstructural characterisation has not been widely applied with all steels such as pearlitic steels or complex multi-phase steels due to their complex microstructures. These microstructures may contain features that cannot be resolved by optical microscopy, and in which important information is contained in their texture rather than simply their grey level. These microstructures were investigated in this study using image texture analysis. Fourier transform-based analysis was applied to pearlitic microstructures to extract the image orientation information. The orientation information as well as the grey value of low pass filtered image was used as predicates in a split-merge algorithm to segment the pearlitic colonies. A supervised classification method based on various statistical measures including a number of 2-point statistics (Grey Level Co-occurrence Matrix measures) was developed to distinguish the bainite (upper bainite and lower bainite), martensite and ferrite phases in steels. The influence of etching on the analysis results was also investigated.","abstract_html":"The measurement of properties is very important for both material design and quality control. As materials’ properties are determined by the microstructure of the materials such as grain size or the volume fraction of the present phases, microstructural characterisation is a powerful tool for property prediction. Unfortunately, microstructural characterisation has not been widely applied with all steels such as pearlitic steels or complex multi-phase steels due to their complex microstructures. These microstructures may contain features that cannot be resolved by optical microscopy, and in which important information is contained in their texture rather than simply their grey level. These microstructures were investigated in this study using image texture analysis. Fourier transform-based analysis was applied to pearlitic microstructures to extract the image orientation information. The orientation information as well as the grey value of low pass filtered image was used as predicates in a split-merge algorithm to segment the pearlitic colonies. A supervised classification method based on various statistical measures including a number of 2-point statistics (Grey Level Co-occurrence Matrix measures) was developed to distinguish the bainite (upper bainite and lower bainite), martensite and ferrite phases in steels. The influence of etching on the analysis results was also investigated.","abstract_has_math":false,"creators":["Liu, Xi"],"institution":"University of Birmingham","degree_name":"d_ph","degree_level":"d_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2014,"date_issued":"2014-07","date_published":"2014-07","updated_at":"2026-11-19T09:27:51Z","subjects":["TN Mining engineering. Metallurgy"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/4842/1/Liu14PhD.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A4842","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["na"]},{"key":"dc:creator","label":"Author","values":["Liu, Xi"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2014-07"]},{"key":"dc:date.issued","label":"Date","values":["2014-07"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/4842/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["d_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["d_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TN Mining engineering. Metallurgy"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/4842/1/Liu14PhD.pdf","http://etheses.bham.ac.uk//id/eprint/4842/5/Decl_IS_Liu14PhD.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["The measurement of properties is very important for both material design and quality control. As materials’ properties are determined by the microstructure of the materials such as grain size or the volume fraction of the present phases, microstructural characterisation is a powerful tool for property prediction. Unfortunately, microstructural characterisation has not been widely applied with all steels such as pearlitic steels or complex multi-phase steels due to their complex microstructures. These microstructures may contain features that cannot be resolved by optical microscopy, and in which important information is contained in their texture rather than simply their grey level. These microstructures were investigated in this study using image texture analysis. Fourier transform-based analysis was applied to pearlitic microstructures to extract the image orientation information. The orientation information as well as the grey value of low pass filtered image was used as predicates in a split-merge algorithm to segment the pearlitic colonies. A supervised classification method based on various statistical measures including a number of 2-point statistics (Grey Level Co-occurrence Matrix measures) was developed to distinguish the bainite (upper bainite and lower bainite), martensite and ferrite phases in steels. The influence of etching on the analysis results was also investigated."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public","staffonly"]},{"key":"dc:title","label":"Title","values":["Microstructural characterisation of pearlitic and complex phase steels using image analysis methods"]}]}],"canonical_facts":{"dc:contributor.sponsor":["na"],"dc:creator":["Liu, Xi"],"dc:date":["2014-07"],"dc:date.issued":["2014-07"],"dc:description.abstract":["The measurement of properties is very important for both material design and quality control. As materials’ properties are determined by the microstructure of the materials such as grain size or the volume fraction of the present phases, microstructural characterisation is a powerful tool for property prediction. Unfortunately, microstructural characterisation has not been widely applied with all steels such as pearlitic steels or complex multi-phase steels due to their complex microstructures. These microstructures may contain features that cannot be resolved by optical microscopy, and in which important information is contained in their texture rather than simply their grey level. These microstructures were investigated in this study using image texture analysis. Fourier transform-based analysis was applied to pearlitic microstructures to extract the image orientation information. The orientation information as well as the grey value of low pass filtered image was used as predicates in a split-merge algorithm to segment the pearlitic colonies. A supervised classification method based on various statistical measures including a number of 2-point statistics (Grey Level Co-occurrence Matrix measures) was developed to distinguish the bainite (upper bainite and lower bainite), martensite and ferrite phases in steels. The influence of etching on the analysis results was also investigated."],"dc:format":["application/pdf"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/4842/1/Liu14PhD.pdf","http://etheses.bham.ac.uk//id/eprint/4842/5/Decl_IS_Liu14PhD.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/4842/"],"dc:subject":["TN Mining engineering. Metallurgy"],"dcterms:accessrights":["public","staffonly"],"dc:title":["Microstructural characterisation of pearlitic and complex phase steels using image analysis methods"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["d_ph"],"dc:type.qualificationname":["d_ph"]},"updated_at":"2026-11-19T09:27:51Z"}