{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:4853"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:4853","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"Joining behaviour of crystalline and amorphous Zr-based alloy using Cu-based braze","abstract":"The objective of this research was to understand the melting and wetting behaviour of braze alloys and mechanical properties of brazed joints for pure zirconium plates and the Zr-based bulk metallic glass (BMG), Vitreloy 105 (Zr\\(_5\\)\\(_2\\)\\(_.\\)\\(_5\\)Cu\\(_1\\)\\(_7\\).\\(_9\\)Ni\\(_1\\)\\(_4\\)\\(_.\\)\\(_6\\)Al\\(_1\\)\\(_0\\)Ti\\(_5\\)). Active brazing alloy, Cusil ABA (Ag\\(_6\\)\\(_3\\)Cu\\(_3\\)\\(_5\\)\\(_.\\)\\(_2\\)\\(_3\\)Ti\\(_1\\)\\(_.\\)\\(_7\\)\\(_5\\)), has been used to braze Zr plates in the Gleeble 3500 thermo- mechanical simulator under vacuum at 3 temperatures (840, 940 and 1000 \\(^o\\)C) and with Vitreloy105 at 780 \\(^o\\)C. The shear strength of the brazed Zr-plate increased at lower brazing temperatures; brazing of Vitreloy 105 plates was not successful as the brazing temperature, (Cusil ABA liquidus temperature) exceeded its crystallisation temperature Tx=440 \\(^o\\)C leading to crystallization and embrittlement during to brazing. As a result, three BMG compositions (Mg\\(_6\\)\\(_5\\)Cu\\(_1\\)\\(_5\\)Ag\\(_1\\)\\(_0\\)Tb\\(_1\\)\\(_0\\)\\(_,\\)Zn\\(_4\\)\\(_0\\)Mg\\(_1\\)\\(_1\\)Ca\\(_3\\)\\(_1\\)Yb\\(_1\\)\\(_8\\) and Ca\\(_6\\)\\(_5\\)Mg\\(_1\\)\\(_5\\)Zn\\(_2\\)\\(_0\\)) as potential brazes for Vitreloy 105 with liquidus temperatures below the crystallisation temperature and high values of fracture strength have been selected to predict (using Thermo- Calc) the equilibrium reaction between substrate and braze prior to manufacture in order to estimate likely wettability and joint strength.","abstract_html":"The objective of this research was to understand the melting and wetting behaviour of braze alloys and mechanical properties of brazed joints for pure zirconium plates and the Zr-based bulk metallic glass (BMG), Vitreloy 105 (Zr<span class=\"etd-inline-math\"><sub>5</sub></span><span class=\"etd-inline-math\"><sub>2</sub></span><span class=\"etd-inline-math\"><sub>.</sub></span><span class=\"etd-inline-math\"><sub>5</sub></span>Cu<span class=\"etd-inline-math\"><sub>1</sub></span><span class=\"etd-inline-math\"><sub>7</sub></span>.<span class=\"etd-inline-math\"><sub>9</sub></span>Ni<span class=\"etd-inline-math\"><sub>1</sub></span><span class=\"etd-inline-math\"><sub>4</sub></span><span class=\"etd-inline-math\"><sub>.</sub></span><span class=\"etd-inline-math\"><sub>6</sub></span>Al<span class=\"etd-inline-math\"><sub>1</sub></span><span class=\"etd-inline-math\"><sub>0</sub></span>Ti<span class=\"etd-inline-math\"><sub>5</sub></span>). Active brazing alloy, Cusil ABA (Ag<span class=\"etd-inline-math\"><sub>6</sub></span><span class=\"etd-inline-math\"><sub>3</sub></span>Cu<span class=\"etd-inline-math\"><sub>3</sub></span><span class=\"etd-inline-math\"><sub>5</sub></span><span class=\"etd-inline-math\"><sub>.</sub></span><span class=\"etd-inline-math\"><sub>2</sub></span><span class=\"etd-inline-math\"><sub>3</sub></span>Ti<span class=\"etd-inline-math\"><sub>1</sub></span><span class=\"etd-inline-math\"><sub>.</sub></span><span class=\"etd-inline-math\"><sub>7</sub></span><span class=\"etd-inline-math\"><sub>5</sub></span>), has been used to braze Zr plates in the Gleeble 3500 thermo- mechanical simulator under vacuum at 3 temperatures (840, 940 and 1000 <span class=\"etd-inline-math\"><sup>o</sup></span>C) and with Vitreloy105 at 780 <span class=\"etd-inline-math\"><sup>o</sup></span>C. The shear strength of the brazed Zr-plate increased at lower brazing temperatures; brazing of Vitreloy 105 plates was not successful as the brazing temperature, (Cusil ABA liquidus temperature) exceeded its crystallisation temperature Tx=440 <span class=\"etd-inline-math\"><sup>o</sup></span>C leading to crystallization and embrittlement during to brazing. As a result, three BMG compositions (Mg<span class=\"etd-inline-math\"><sub>6</sub></span><span class=\"etd-inline-math\"><sub>5</sub></span>Cu<span class=\"etd-inline-math\"><sub>1</sub></span><span class=\"etd-inline-math\"><sub>5</sub></span>Ag<span class=\"etd-inline-math\"><sub>1</sub></span><span class=\"etd-inline-math\"><sub>0</sub></span>Tb<span class=\"etd-inline-math\"><sub>1</sub></span><span class=\"etd-inline-math\"><sub>0</sub></span><span class=\"etd-inline-math\"><sub>,</sub></span>Zn<span class=\"etd-inline-math\"><sub>4</sub></span><span class=\"etd-inline-math\"><sub>0</sub></span>Mg<span class=\"etd-inline-math\"><sub>1</sub></span><span class=\"etd-inline-math\"><sub>1</sub></span>Ca<span class=\"etd-inline-math\"><sub>3</sub></span><span class=\"etd-inline-math\"><sub>1</sub></span>Yb<span class=\"etd-inline-math\"><sub>1</sub></span><span class=\"etd-inline-math\"><sub>8</sub></span> and Ca<span class=\"etd-inline-math\"><sub>6</sub></span><span class=\"etd-inline-math\"><sub>5</sub></span>Mg<span class=\"etd-inline-math\"><sub>1</sub></span><span class=\"etd-inline-math\"><sub>5</sub></span>Zn<span class=\"etd-inline-math\"><sub>2</sub></span><span class=\"etd-inline-math\"><sub>0</sub></span>) as potential brazes for Vitreloy 105 with liquidus temperatures below the crystallisation temperature and high values of fracture strength have been selected to predict (using Thermo- Calc) the equilibrium reaction between substrate and braze prior to manufacture in order to estimate likely wettability and joint strength.","abstract_has_math":true,"creators":["Chiu, Yen-Lin"],"institution":"University of Birmingham","degree_name":"m_ph","degree_level":"m_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2014,"date_issued":"2014-07","date_published":"2014-07","updated_at":"2026-11-19T09:27:55Z","subjects":["TA Engineering (General). Civil engineering (General)"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/4853/1/Decl_IS_Chiu13M.Phil.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A4853","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["na"]},{"key":"dc:creator","label":"Author","values":["Chiu, Yen-Lin"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2014-07"]},{"key":"dc:date.issued","label":"Date","values":["2014-07"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/4853/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["m_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["m_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TA Engineering (General). Civil engineering (General)"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/4853/1/Decl_IS_Chiu13M.Phil.pdf","http://etheses.bham.ac.uk//id/eprint/4853/2/Chiu14M.Phil.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["The objective of this research was to understand the melting and wetting behaviour of braze alloys and mechanical properties of brazed joints for pure zirconium plates and the Zr-based bulk metallic glass (BMG), Vitreloy 105 (Zr\\(_5\\)\\(_2\\)\\(_.\\)\\(_5\\)Cu\\(_1\\)\\(_7\\).\\(_9\\)Ni\\(_1\\)\\(_4\\)\\(_.\\)\\(_6\\)Al\\(_1\\)\\(_0\\)Ti\\(_5\\)). Active brazing alloy, Cusil ABA (Ag\\(_6\\)\\(_3\\)Cu\\(_3\\)\\(_5\\)\\(_.\\)\\(_2\\)\\(_3\\)Ti\\(_1\\)\\(_.\\)\\(_7\\)\\(_5\\)), has been used to braze Zr plates in the Gleeble 3500 thermo- mechanical simulator under vacuum at 3 temperatures (840, 940 and 1000 \\(^o\\)C) and with Vitreloy105 at 780 \\(^o\\)C. The shear strength of the brazed Zr-plate increased at lower brazing temperatures; brazing of Vitreloy 105 plates was not successful as the brazing temperature, (Cusil ABA liquidus temperature) exceeded its crystallisation temperature Tx=440 \\(^o\\)C leading to crystallization and embrittlement during to brazing. As a result, three BMG compositions (Mg\\(_6\\)\\(_5\\)Cu\\(_1\\)\\(_5\\)Ag\\(_1\\)\\(_0\\)Tb\\(_1\\)\\(_0\\)\\(_,\\)Zn\\(_4\\)\\(_0\\)Mg\\(_1\\)\\(_1\\)Ca\\(_3\\)\\(_1\\)Yb\\(_1\\)\\(_8\\) and Ca\\(_6\\)\\(_5\\)Mg\\(_1\\)\\(_5\\)Zn\\(_2\\)\\(_0\\)) as potential brazes for Vitreloy 105 with liquidus temperatures below the crystallisation temperature and high values of fracture strength have been selected to predict (using Thermo- Calc) the equilibrium reaction between substrate and braze prior to manufacture in order to estimate likely wettability and joint strength."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["staffonly","public"]},{"key":"dc:title","label":"Title","values":["Joining behaviour of crystalline and amorphous Zr-based alloy using Cu-based braze"]}]}],"canonical_facts":{"dc:contributor.sponsor":["na"],"dc:creator":["Chiu, Yen-Lin"],"dc:date":["2014-07"],"dc:date.issued":["2014-07"],"dc:description.abstract":["The objective of this research was to understand the melting and wetting behaviour of braze alloys and mechanical properties of brazed joints for pure zirconium plates and the Zr-based bulk metallic glass (BMG), Vitreloy 105 (Zr\\(_5\\)\\(_2\\)\\(_.\\)\\(_5\\)Cu\\(_1\\)\\(_7\\).\\(_9\\)Ni\\(_1\\)\\(_4\\)\\(_.\\)\\(_6\\)Al\\(_1\\)\\(_0\\)Ti\\(_5\\)). Active brazing alloy, Cusil ABA (Ag\\(_6\\)\\(_3\\)Cu\\(_3\\)\\(_5\\)\\(_.\\)\\(_2\\)\\(_3\\)Ti\\(_1\\)\\(_.\\)\\(_7\\)\\(_5\\)), has been used to braze Zr plates in the Gleeble 3500 thermo- mechanical simulator under vacuum at 3 temperatures (840, 940 and 1000 \\(^o\\)C) and with Vitreloy105 at 780 \\(^o\\)C. The shear strength of the brazed Zr-plate increased at lower brazing temperatures; brazing of Vitreloy 105 plates was not successful as the brazing temperature, (Cusil ABA liquidus temperature) exceeded its crystallisation temperature Tx=440 \\(^o\\)C leading to crystallization and embrittlement during to brazing. As a result, three BMG compositions (Mg\\(_6\\)\\(_5\\)Cu\\(_1\\)\\(_5\\)Ag\\(_1\\)\\(_0\\)Tb\\(_1\\)\\(_0\\)\\(_,\\)Zn\\(_4\\)\\(_0\\)Mg\\(_1\\)\\(_1\\)Ca\\(_3\\)\\(_1\\)Yb\\(_1\\)\\(_8\\) and Ca\\(_6\\)\\(_5\\)Mg\\(_1\\)\\(_5\\)Zn\\(_2\\)\\(_0\\)) as potential brazes for Vitreloy 105 with liquidus temperatures below the crystallisation temperature and high values of fracture strength have been selected to predict (using Thermo- Calc) the equilibrium reaction between substrate and braze prior to manufacture in order to estimate likely wettability and joint strength."],"dc:format":["application/pdf"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/4853/1/Decl_IS_Chiu13M.Phil.pdf","http://etheses.bham.ac.uk//id/eprint/4853/2/Chiu14M.Phil.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/4853/"],"dc:subject":["TA Engineering (General). Civil engineering (General)"],"dcterms:accessrights":["staffonly","public"],"dc:title":["Joining behaviour of crystalline and amorphous Zr-based alloy using Cu-based braze"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["m_ph"],"dc:type.qualificationname":["m_ph"]},"updated_at":"2026-11-19T09:27:55Z"}