{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:5063"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:5063","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"Equal channel angular pressing of elemental & alloyed P/M aluminium systems","abstract":"Aluminium powder metallurgy provides lightweight automobile components for reduced energy consumption. Conventional press-and-sinter methods can leave porosity in final parts, which reduces strength of the alloy. Equal Channel Angular Pressing (ECAP) can be used to increase density of powder compacts after sintering via severe plastic deformation. Solid state sintering of pure aluminium and liquid phase sintering of a commercial Al-Sn bearing alloy were analysed with industrial collaborative support. The use of room temperature ECAP to these sintered materials was investigated. Cold compaction produced a porous region on the outside of all samples due to increased friction at the die wall. The application of ECAP to pure aluminium and bearing alloys caused elongation in the longitudinal section and a relatively equiaxed microstructure in the transverse section. Sintering at 500°C for 1 and lOhours and 550°C for lh was ineffective as liquid tin did not wet the aluminium effectively. After ECAP, density and hardness increased with refined grain sizes and formed two distinct regions; a denser, deformed core and a non-deformed skin, which resulted from non-uniform densification after cold compaction.","abstract_html":"Aluminium powder metallurgy provides lightweight automobile components for reduced energy consumption. Conventional press-and-sinter methods can leave porosity in final parts, which reduces strength of the alloy. Equal Channel Angular Pressing (ECAP) can be used to increase density of powder compacts after sintering via severe plastic deformation. Solid state sintering of pure aluminium and liquid phase sintering of a commercial Al-Sn bearing alloy were analysed with industrial collaborative support. The use of room temperature ECAP to these sintered materials was investigated. Cold compaction produced a porous region on the outside of all samples due to increased friction at the die wall. The application of ECAP to pure aluminium and bearing alloys caused elongation in the longitudinal section and a relatively equiaxed microstructure in the transverse section. Sintering at 500°C for 1 and lOhours and 550°C for lh was ineffective as liquid tin did not wet the aluminium effectively. After ECAP, density and hardness increased with refined grain sizes and formed two distinct regions; a denser, deformed core and a non-deformed skin, which resulted from non-uniform densification after cold compaction.","abstract_has_math":false,"creators":["Harrison, Nicholas"],"institution":"University of Birmingham","degree_name":"d_ph","degree_level":"d_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2014,"date_issued":"2014-07","date_published":"2014-07","updated_at":"2026-11-19T09:27:58Z","subjects":["T Technology (General)","TN Mining engineering. Metallurgy","TS Manufactures"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/5063/1/Harrison14PhD.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A5063","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["epsrc"]},{"key":"dc:creator","label":"Author","values":["Harrison, Nicholas"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2014-07"]},{"key":"dc:date.issued","label":"Date","values":["2014-07"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/5063/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["d_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["d_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["T Technology (General)","TN Mining engineering. Metallurgy","TS Manufactures"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/5063/1/Harrison14PhD.pdf","http://etheses.bham.ac.uk//id/eprint/5063/2/Decl_IS_Harrison14PhD.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Aluminium powder metallurgy provides lightweight automobile components for reduced energy consumption. Conventional press-and-sinter methods can leave porosity in final parts, which reduces strength of the alloy. Equal Channel Angular Pressing (ECAP) can be used to increase density of powder compacts after sintering via severe plastic deformation. Solid state sintering of pure aluminium and liquid phase sintering of a commercial Al-Sn bearing alloy were analysed with industrial collaborative support. The use of room temperature ECAP to these sintered materials was investigated. Cold compaction produced a porous region on the outside of all samples due to increased friction at the die wall. The application of ECAP to pure aluminium and bearing alloys caused elongation in the longitudinal section and a relatively equiaxed microstructure in the transverse section. Sintering at 500°C for 1 and lOhours and 550°C for lh was ineffective as liquid tin did not wet the aluminium effectively. After ECAP, density and hardness increased with refined grain sizes and formed two distinct regions; a denser, deformed core and a non-deformed skin, which resulted from non-uniform densification after cold compaction."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public","staffonly"]},{"key":"dc:title","label":"Title","values":["Equal channel angular pressing of elemental & alloyed P/M aluminium systems"]}]}],"canonical_facts":{"dc:contributor.sponsor":["epsrc"],"dc:creator":["Harrison, Nicholas"],"dc:date":["2014-07"],"dc:date.issued":["2014-07"],"dc:description.abstract":["Aluminium powder metallurgy provides lightweight automobile components for reduced energy consumption. Conventional press-and-sinter methods can leave porosity in final parts, which reduces strength of the alloy. Equal Channel Angular Pressing (ECAP) can be used to increase density of powder compacts after sintering via severe plastic deformation. Solid state sintering of pure aluminium and liquid phase sintering of a commercial Al-Sn bearing alloy were analysed with industrial collaborative support. The use of room temperature ECAP to these sintered materials was investigated. Cold compaction produced a porous region on the outside of all samples due to increased friction at the die wall. The application of ECAP to pure aluminium and bearing alloys caused elongation in the longitudinal section and a relatively equiaxed microstructure in the transverse section. Sintering at 500°C for 1 and lOhours and 550°C for lh was ineffective as liquid tin did not wet the aluminium effectively. After ECAP, density and hardness increased with refined grain sizes and formed two distinct regions; a denser, deformed core and a non-deformed skin, which resulted from non-uniform densification after cold compaction."],"dc:format":["application/pdf"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/5063/1/Harrison14PhD.pdf","http://etheses.bham.ac.uk//id/eprint/5063/2/Decl_IS_Harrison14PhD.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/5063/"],"dc:subject":["T Technology (General)","TN Mining engineering. Metallurgy","TS Manufactures"],"dcterms:accessrights":["public","staffonly"],"dc:title":["Equal channel angular pressing of elemental & alloyed P/M aluminium systems"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["d_ph"],"dc:type.qualificationname":["d_ph"]},"updated_at":"2026-11-19T09:27:58Z"}