{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:5167"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:5167","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"The fabrication of aluminium: carbon nanotube metal matrix composites","abstract":"A range of multi-walled carbon nanotubes of various purities were used to produce aluminium-carbon nanotube metal matrix composite specimens. Composite preform powders were prepared by multi-axial mixing, known as turbula mixing, for 8 hours and high energy ball milling for I hour and for 4 hours. Composite specimens were then prepared using numerous techniques: cold compaction, sintering and casting. Equal Channel Angular Pressing (ECAP) was also used to fabricate composite specimens. Specimens from all methods were tested for density and hardness. They were also examined using scanning electron microscopy. It was found that high grade carbon nanotubes produced the best density and hardness properties, and that high energy ball milling was superior to turbula mixing for preparation of composite preforms. Ball milling for 4 hours produced the most consistent composite properties. Equal Channel Angular Pressing (ECAP) was found to produce a consistent improvement in both hardness and density of composite samples compared to cold compaction. Results from sintered specimens showed further improvement and these specimens showed the highest hardness and most densification of all samples investigated in this report. An attempt was made to produce cast composite specimens. Composite castings did not achieve comparable properties to other processing techniques.","abstract_html":"A range of multi-walled carbon nanotubes of various purities were used to produce aluminium-carbon nanotube metal matrix composite specimens. Composite preform powders were prepared by multi-axial mixing, known as turbula mixing, for 8 hours and high energy ball milling for I hour and for 4 hours. Composite specimens were then prepared using numerous techniques: cold compaction, sintering and casting. Equal Channel Angular Pressing (ECAP) was also used to fabricate composite specimens. Specimens from all methods were tested for density and hardness. They were also examined using scanning electron microscopy. It was found that high grade carbon nanotubes produced the best density and hardness properties, and that high energy ball milling was superior to turbula mixing for preparation of composite preforms. Ball milling for 4 hours produced the most consistent composite properties. Equal Channel Angular Pressing (ECAP) was found to produce a consistent improvement in both hardness and density of composite samples compared to cold compaction. Results from sintered specimens showed further improvement and these specimens showed the highest hardness and most densification of all samples investigated in this report. An attempt was made to produce cast composite specimens. Composite castings did not achieve comparable properties to other processing techniques.","abstract_has_math":false,"creators":["Powell, Adam R"],"institution":"University of Birmingham","degree_name":"m_ph","degree_level":"m_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2014,"date_issued":"2014-07","date_published":"2014-07","updated_at":"2026-11-19T09:28:08Z","subjects":["TN Mining engineering. Metallurgy"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/5167/1/Powell14MPhil.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A5167","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["na"]},{"key":"dc:creator","label":"Author","values":["Powell, Adam R"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2014-07"]},{"key":"dc:date.issued","label":"Date","values":["2014-07"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/5167/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["m_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["m_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TN Mining engineering. Metallurgy"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/5167/1/Powell14MPhil.pdf","http://etheses.bham.ac.uk//id/eprint/5167/2/Decl_IS_Powell14MPhil.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["A range of multi-walled carbon nanotubes of various purities were used to produce aluminium-carbon nanotube metal matrix composite specimens. Composite preform powders were prepared by multi-axial mixing, known as turbula mixing, for 8 hours and high energy ball milling for I hour and for 4 hours. Composite specimens were then prepared using numerous techniques: cold compaction, sintering and casting. Equal Channel Angular Pressing (ECAP) was also used to fabricate composite specimens. Specimens from all methods were tested for density and hardness. They were also examined using scanning electron microscopy. It was found that high grade carbon nanotubes produced the best density and hardness properties, and that high energy ball milling was superior to turbula mixing for preparation of composite preforms. Ball milling for 4 hours produced the most consistent composite properties. Equal Channel Angular Pressing (ECAP) was found to produce a consistent improvement in both hardness and density of composite samples compared to cold compaction. Results from sintered specimens showed further improvement and these specimens showed the highest hardness and most densification of all samples investigated in this report. An attempt was made to produce cast composite specimens. Composite castings did not achieve comparable properties to other processing techniques."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public","staffonly"]},{"key":"dc:title","label":"Title","values":["The fabrication of aluminium: carbon nanotube metal matrix composites"]}]}],"canonical_facts":{"dc:contributor.sponsor":["na"],"dc:creator":["Powell, Adam R"],"dc:date":["2014-07"],"dc:date.issued":["2014-07"],"dc:description.abstract":["A range of multi-walled carbon nanotubes of various purities were used to produce aluminium-carbon nanotube metal matrix composite specimens. Composite preform powders were prepared by multi-axial mixing, known as turbula mixing, for 8 hours and high energy ball milling for I hour and for 4 hours. Composite specimens were then prepared using numerous techniques: cold compaction, sintering and casting. Equal Channel Angular Pressing (ECAP) was also used to fabricate composite specimens. Specimens from all methods were tested for density and hardness. They were also examined using scanning electron microscopy. It was found that high grade carbon nanotubes produced the best density and hardness properties, and that high energy ball milling was superior to turbula mixing for preparation of composite preforms. Ball milling for 4 hours produced the most consistent composite properties. Equal Channel Angular Pressing (ECAP) was found to produce a consistent improvement in both hardness and density of composite samples compared to cold compaction. Results from sintered specimens showed further improvement and these specimens showed the highest hardness and most densification of all samples investigated in this report. An attempt was made to produce cast composite specimens. Composite castings did not achieve comparable properties to other processing techniques."],"dc:format":["application/pdf"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/5167/1/Powell14MPhil.pdf","http://etheses.bham.ac.uk//id/eprint/5167/2/Decl_IS_Powell14MPhil.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/5167/"],"dc:subject":["TN Mining engineering. Metallurgy"],"dcterms:accessrights":["public","staffonly"],"dc:title":["The fabrication of aluminium: carbon nanotube metal matrix composites"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["m_ph"],"dc:type.qualificationname":["m_ph"]},"updated_at":"2026-11-19T09:28:08Z"}