{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:5209"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:5209","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"Study of conventional annealing and laser annealing of vitreloy1b zr-based BMG","abstract":"The machining response of a Zr-based amorphous alloy (Zr44Ti11Cu10Ni10Be25) when subjected to nano-second laser machining is investigated. The surface integrity of laser machined fields in two sets of experiments is studied using scanning electron microscopy (SEM) followed by subsequent X-ray diffraction (XRD) analysis to observe any phase changes. The study shows that the highly attractive short-range atomic ordering of the material can be preserved by optimizing the laser machining conditions. It was demonstrated that the surface roughness achievable after nano-second laser machining was comparable with that attainable in micro milling. This thesis also investigates the effects of an additional annealing stage using two different techniques. Previous research has shown that when certain amorphous alloys are reheated into their supercooled liquid region, surface features can be erased under the action of surface tension forces. This study performs annealing experiments using a hot plate setup as well as an in-situ hot stage microscopy setup. The results reveal that no subsequent erasure of features was seen for the Zr-based amorphous alloy and this is attributed to the fast oxidation rate associated with the alloy preventing a surface smoothening effect from occurring.","abstract_html":"The machining response of a Zr-based amorphous alloy (Zr44Ti11Cu10Ni10Be25) when subjected to nano-second laser machining is investigated. The surface integrity of laser machined fields in two sets of experiments is studied using scanning electron microscopy (SEM) followed by subsequent X-ray diffraction (XRD) analysis to observe any phase changes. The study shows that the highly attractive short-range atomic ordering of the material can be preserved by optimizing the laser machining conditions. It was demonstrated that the surface roughness achievable after nano-second laser machining was comparable with that attainable in micro milling. This thesis also investigates the effects of an additional annealing stage using two different techniques. Previous research has shown that when certain amorphous alloys are reheated into their supercooled liquid region, surface features can be erased under the action of surface tension forces. This study performs annealing experiments using a hot plate setup as well as an in-situ hot stage microscopy setup. The results reveal that no subsequent erasure of features was seen for the Zr-based amorphous alloy and this is attributed to the fast oxidation rate associated with the alloy preventing a surface smoothening effect from occurring.","abstract_has_math":false,"creators":["Pavey, Jonathan Michael"],"institution":"University of Birmingham","degree_name":"m_rs","degree_level":"m_rs","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2014,"date_issued":"2014-07","date_published":"2014-07","updated_at":"2026-11-19T09:28:14Z","subjects":["TN Mining engineering. Metallurgy"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/5209/1/Pavey14MRes.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A5209","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["na"]},{"key":"dc:creator","label":"Author","values":["Pavey, Jonathan Michael"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2014-07"]},{"key":"dc:date.issued","label":"Date","values":["2014-07"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/5209/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["m_rs"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["m_rs"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TN Mining engineering. Metallurgy"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/5209/1/Pavey14MRes.pdf","http://etheses.bham.ac.uk//id/eprint/5209/2/Decl_IS_Pavey14MRes.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["The machining response of a Zr-based amorphous alloy (Zr44Ti11Cu10Ni10Be25) when subjected to nano-second laser machining is investigated. The surface integrity of laser machined fields in two sets of experiments is studied using scanning electron microscopy (SEM) followed by subsequent X-ray diffraction (XRD) analysis to observe any phase changes. The study shows that the highly attractive short-range atomic ordering of the material can be preserved by optimizing the laser machining conditions. It was demonstrated that the surface roughness achievable after nano-second laser machining was comparable with that attainable in micro milling. This thesis also investigates the effects of an additional annealing stage using two different techniques. Previous research has shown that when certain amorphous alloys are reheated into their supercooled liquid region, surface features can be erased under the action of surface tension forces. This study performs annealing experiments using a hot plate setup as well as an in-situ hot stage microscopy setup. The results reveal that no subsequent erasure of features was seen for the Zr-based amorphous alloy and this is attributed to the fast oxidation rate associated with the alloy preventing a surface smoothening effect from occurring."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public","staffonly"]},{"key":"dc:title","label":"Title","values":["Study of conventional annealing and laser annealing of vitreloy1b zr-based BMG"]}]}],"canonical_facts":{"dc:contributor.sponsor":["na"],"dc:creator":["Pavey, Jonathan Michael"],"dc:date":["2014-07"],"dc:date.issued":["2014-07"],"dc:description.abstract":["The machining response of a Zr-based amorphous alloy (Zr44Ti11Cu10Ni10Be25) when subjected to nano-second laser machining is investigated. The surface integrity of laser machined fields in two sets of experiments is studied using scanning electron microscopy (SEM) followed by subsequent X-ray diffraction (XRD) analysis to observe any phase changes. The study shows that the highly attractive short-range atomic ordering of the material can be preserved by optimizing the laser machining conditions. It was demonstrated that the surface roughness achievable after nano-second laser machining was comparable with that attainable in micro milling. This thesis also investigates the effects of an additional annealing stage using two different techniques. Previous research has shown that when certain amorphous alloys are reheated into their supercooled liquid region, surface features can be erased under the action of surface tension forces. This study performs annealing experiments using a hot plate setup as well as an in-situ hot stage microscopy setup. The results reveal that no subsequent erasure of features was seen for the Zr-based amorphous alloy and this is attributed to the fast oxidation rate associated with the alloy preventing a surface smoothening effect from occurring."],"dc:format":["application/pdf"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/5209/1/Pavey14MRes.pdf","http://etheses.bham.ac.uk//id/eprint/5209/2/Decl_IS_Pavey14MRes.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/5209/"],"dc:subject":["TN Mining engineering. Metallurgy"],"dcterms:accessrights":["public","staffonly"],"dc:title":["Study of conventional annealing and laser annealing of vitreloy1b zr-based BMG"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["m_rs"],"dc:type.qualificationname":["m_rs"]},"updated_at":"2026-11-19T09:28:14Z"}