{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:5662"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:5662","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"Process and structural health monitoring of advanced fibre reinforced composites using optical fibre sensors","abstract":"The focus of this research was to design, optimise and deploy a practical multi-measurand sensor (MMS) for process monitoring of glass and carbon fibre preforms in an autoclave. The MMS design was based on the optical fibre-based extrinsic Fabry-Perot interferometric (EFPI) strain sensor. The EFPI sensor consisted of a pair of cleaved optical fibres, with a defined gap that were housed in a precision bore capillary. Interferometric interrogation was used to measure the cavity length hence, permitting the strain to be determined. The basic EFPI sensor design was modified in the following manner to enable multi-measurand monitoring. Firstly, a fibre Bragg grating (FBG) was inscribed on one of the optical fibres that were destined to be housed in the capillary; the end-face of this cleaved optical fibre was sputter coated with Au/Pd to produce a reflective surface. This FBG is in a relatively strain-free condition and only responds to temperature. Secondly, a technique was developed to manufacture optical-quality end-faces of the capillary and this too was sputter coated with Au/Pd. Thirdly, secondary cleaved optical fibres were packed around the lead-in optical fibre of the EFPI sensor with a defined (secondary) cavity thus, permitting transmission/reflection FTNIR spectroscopy. Finally, cleaved secondary optical fibres were also secured to the lead-in fibre and these served as Fresnel reflection sensors. The interrogation of the MMS was carried out using a conventional fibre-coupled multi-channel FTNIR spectrometer. The feasibility of monitoring strain, temperature, cross-linking kinetics and refractive index simultaneously during the processing of glass and carbon fibre preforms was demonstrated.","abstract_html":"The focus of this research was to design, optimise and deploy a practical multi-measurand sensor (MMS) for process monitoring of glass and carbon fibre preforms in an autoclave. The MMS design was based on the optical fibre-based extrinsic Fabry-Perot interferometric (EFPI) strain sensor. The EFPI sensor consisted of a pair of cleaved optical fibres, with a defined gap that were housed in a precision bore capillary. Interferometric interrogation was used to measure the cavity length hence, permitting the strain to be determined. The basic EFPI sensor design was modified in the following manner to enable multi-measurand monitoring. Firstly, a fibre Bragg grating (FBG) was inscribed on one of the optical fibres that were destined to be housed in the capillary; the end-face of this cleaved optical fibre was sputter coated with Au/Pd to produce a reflective surface. This FBG is in a relatively strain-free condition and only responds to temperature. Secondly, a technique was developed to manufacture optical-quality end-faces of the capillary and this too was sputter coated with Au/Pd. Thirdly, secondary cleaved optical fibres were packed around the lead-in optical fibre of the EFPI sensor with a defined (secondary) cavity thus, permitting transmission/reflection FTNIR spectroscopy. Finally, cleaved secondary optical fibres were also secured to the lead-in fibre and these served as Fresnel reflection sensors. The interrogation of the MMS was carried out using a conventional fibre-coupled multi-channel FTNIR spectrometer. The feasibility of monitoring strain, temperature, cross-linking kinetics and refractive index simultaneously during the processing of glass and carbon fibre preforms was demonstrated.","abstract_has_math":false,"creators":["Nair, Abilash Kumar Kochumulappon Raghavan"],"institution":"University of Birmingham","degree_name":"d_ph","degree_level":"d_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2015,"date_issued":"2015-07","date_published":"2015-07","updated_at":"2026-11-19T09:28:31Z","subjects":["TN Mining engineering. Metallurgy"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/5662/1/Nair15PhD.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A5662","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["other"]},{"key":"dc:creator","label":"Author","values":["Nair, Abilash Kumar Kochumulappon Raghavan"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2015-07"]},{"key":"dc:date.issued","label":"Date","values":["2015-07"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/5662/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["d_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["d_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TN Mining engineering. Metallurgy"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/5662/1/Nair15PhD.pdf","http://etheses.bham.ac.uk//id/eprint/5662/2/Decl_IS_Nair15PhD.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["The focus of this research was to design, optimise and deploy a practical multi-measurand sensor (MMS) for process monitoring of glass and carbon fibre preforms in an autoclave. The MMS design was based on the optical fibre-based extrinsic Fabry-Perot interferometric (EFPI) strain sensor. The EFPI sensor consisted of a pair of cleaved optical fibres, with a defined gap that were housed in a precision bore capillary. Interferometric interrogation was used to measure the cavity length hence, permitting the strain to be determined. The basic EFPI sensor design was modified in the following manner to enable multi-measurand monitoring. Firstly, a fibre Bragg grating (FBG) was inscribed on one of the optical fibres that were destined to be housed in the capillary; the end-face of this cleaved optical fibre was sputter coated with Au/Pd to produce a reflective surface. This FBG is in a relatively strain-free condition and only responds to temperature. Secondly, a technique was developed to manufacture optical-quality end-faces of the capillary and this too was sputter coated with Au/Pd. Thirdly, secondary cleaved optical fibres were packed around the lead-in optical fibre of the EFPI sensor with a defined (secondary) cavity thus, permitting transmission/reflection FTNIR spectroscopy. Finally, cleaved secondary optical fibres were also secured to the lead-in fibre and these served as Fresnel reflection sensors. The interrogation of the MMS was carried out using a conventional fibre-coupled multi-channel FTNIR spectrometer. The feasibility of monitoring strain, temperature, cross-linking kinetics and refractive index simultaneously during the processing of glass and carbon fibre preforms was demonstrated."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public","staffonly"]},{"key":"dc:title","label":"Title","values":["Process and structural health monitoring of advanced fibre reinforced composites using optical fibre sensors"]}]}],"canonical_facts":{"dc:contributor.sponsor":["other"],"dc:creator":["Nair, Abilash Kumar Kochumulappon Raghavan"],"dc:date":["2015-07"],"dc:date.issued":["2015-07"],"dc:description.abstract":["The focus of this research was to design, optimise and deploy a practical multi-measurand sensor (MMS) for process monitoring of glass and carbon fibre preforms in an autoclave. The MMS design was based on the optical fibre-based extrinsic Fabry-Perot interferometric (EFPI) strain sensor. The EFPI sensor consisted of a pair of cleaved optical fibres, with a defined gap that were housed in a precision bore capillary. Interferometric interrogation was used to measure the cavity length hence, permitting the strain to be determined. The basic EFPI sensor design was modified in the following manner to enable multi-measurand monitoring. Firstly, a fibre Bragg grating (FBG) was inscribed on one of the optical fibres that were destined to be housed in the capillary; the end-face of this cleaved optical fibre was sputter coated with Au/Pd to produce a reflective surface. This FBG is in a relatively strain-free condition and only responds to temperature. Secondly, a technique was developed to manufacture optical-quality end-faces of the capillary and this too was sputter coated with Au/Pd. Thirdly, secondary cleaved optical fibres were packed around the lead-in optical fibre of the EFPI sensor with a defined (secondary) cavity thus, permitting transmission/reflection FTNIR spectroscopy. Finally, cleaved secondary optical fibres were also secured to the lead-in fibre and these served as Fresnel reflection sensors. The interrogation of the MMS was carried out using a conventional fibre-coupled multi-channel FTNIR spectrometer. The feasibility of monitoring strain, temperature, cross-linking kinetics and refractive index simultaneously during the processing of glass and carbon fibre preforms was demonstrated."],"dc:format":["application/pdf"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/5662/1/Nair15PhD.pdf","http://etheses.bham.ac.uk//id/eprint/5662/2/Decl_IS_Nair15PhD.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/5662/"],"dc:subject":["TN Mining engineering. Metallurgy"],"dcterms:accessrights":["public","staffonly"],"dc:title":["Process and structural health monitoring of advanced fibre reinforced composites using optical fibre sensors"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["d_ph"],"dc:type.qualificationname":["d_ph"]},"updated_at":"2026-11-19T09:28:31Z"}