{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:5699"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:5699","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"Coupled superconducting microwave resonators for studies of electro-mechanical interaction","abstract":"The motivation behind the work described in this thesis is to study the coupling between a nanobar and a pair of identical, coupled, superconducting microwave resonators, where the splitting frequency at their avoided crossing is close to the nanobar resonant frequency. The splitting frequency as a function of the coupling between the microwave resonators has been thoroughly investigated by theoretical simulations in COMSOL and AIM Spice, and experimentally verified by low temperature measurements. Deviations of the measured splitting from the theoretical values and reflection measurements showed that the resonators required to be tuned in order to reach the avoided crossing. A novel tuning mechanism was devised and implemented in-situ in the experiments. Tuning of resonators was successfully achieved and there was excellent agreement of the measured splitting with the predicted values. A wide frequency tuning range of 50 MHz was obtained, more than required for our experiments, without degrading the high resonator quality factors (~10\\(^5\\)). This enabled the measurement of the inherent splitting of the coupled resonator frequencies at the avoided crossing, and more importantly, paves the way for studies of electro-mechanical interaction. In the absence of nanobars, an analogous experiment that varied the resonator inductance instead of its capacitance was devised. The resonant frequency of one of the resonators was perturbed using a small amplitude magnetic field using a coil placed underneath the sample, a case that has not been previously explored. The results obtained from these preliminary experiments have shown a good agreement with the theoretical predictions.","abstract_html":"The motivation behind the work described in this thesis is to study the coupling between a nanobar and a pair of identical, coupled, superconducting microwave resonators, where the splitting frequency at their avoided crossing is close to the nanobar resonant frequency. The splitting frequency as a function of the coupling between the microwave resonators has been thoroughly investigated by theoretical simulations in COMSOL and AIM Spice, and experimentally verified by low temperature measurements. Deviations of the measured splitting from the theoretical values and reflection measurements showed that the resonators required to be tuned in order to reach the avoided crossing. A novel tuning mechanism was devised and implemented in-situ in the experiments. Tuning of resonators was successfully achieved and there was excellent agreement of the measured splitting with the predicted values. A wide frequency tuning range of 50 MHz was obtained, more than required for our experiments, without degrading the high resonator quality factors (~10<span class=\"etd-inline-math\"><sup>5</sup></span>). This enabled the measurement of the inherent splitting of the coupled resonator frequencies at the avoided crossing, and more importantly, paves the way for studies of electro-mechanical interaction. In the absence of nanobars, an analogous experiment that varied the resonator inductance instead of its capacitance was devised. The resonant frequency of one of the resonators was perturbed using a small amplitude magnetic field using a coil placed underneath the sample, a case that has not been previously explored. The results obtained from these preliminary experiments have shown a good agreement with the theoretical predictions.","abstract_has_math":true,"creators":["Gunupudi, Bindu"],"institution":"University of Birmingham","degree_name":"d_ph","degree_level":"d_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2015,"date_issued":"2015-07","date_published":"2015-07","updated_at":"2026-11-19T09:28:31Z","subjects":["QC Physics","TK Electrical engineering. Electronics Nuclear engineering"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/5699/1/Gunupudi15PhD.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A5699","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["na"]},{"key":"dc:creator","label":"Author","values":["Gunupudi, Bindu"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2015-07"]},{"key":"dc:date.issued","label":"Date","values":["2015-07"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Physics and Astronomy"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/5699/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["d_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["d_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["QC Physics","TK Electrical engineering. Electronics Nuclear engineering"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/5699/1/Gunupudi15PhD.pdf","http://etheses.bham.ac.uk//id/eprint/5699/2/Decl_IS_Gunupudi15PhD.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["The motivation behind the work described in this thesis is to study the coupling between a nanobar and a pair of identical, coupled, superconducting microwave resonators, where the splitting frequency at their avoided crossing is close to the nanobar resonant frequency. The splitting frequency as a function of the coupling between the microwave resonators has been thoroughly investigated by theoretical simulations in COMSOL and AIM Spice, and experimentally verified by low temperature measurements. Deviations of the measured splitting from the theoretical values and reflection measurements showed that the resonators required to be tuned in order to reach the avoided crossing. A novel tuning mechanism was devised and implemented in-situ in the experiments. Tuning of resonators was successfully achieved and there was excellent agreement of the measured splitting with the predicted values. A wide frequency tuning range of 50 MHz was obtained, more than required for our experiments, without degrading the high resonator quality factors (~10\\(^5\\)). This enabled the measurement of the inherent splitting of the coupled resonator frequencies at the avoided crossing, and more importantly, paves the way for studies of electro-mechanical interaction. In the absence of nanobars, an analogous experiment that varied the resonator inductance instead of its capacitance was devised. The resonant frequency of one of the resonators was perturbed using a small amplitude magnetic field using a coil placed underneath the sample, a case that has not been previously explored. The results obtained from these preliminary experiments have shown a good agreement with the theoretical predictions."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public","staffonly"]},{"key":"dc:title","label":"Title","values":["Coupled superconducting microwave resonators for studies of electro-mechanical interaction"]}]}],"canonical_facts":{"dc:contributor.sponsor":["na"],"dc:creator":["Gunupudi, Bindu"],"dc:date":["2015-07"],"dc:date.issued":["2015-07"],"dc:description.abstract":["The motivation behind the work described in this thesis is to study the coupling between a nanobar and a pair of identical, coupled, superconducting microwave resonators, where the splitting frequency at their avoided crossing is close to the nanobar resonant frequency. The splitting frequency as a function of the coupling between the microwave resonators has been thoroughly investigated by theoretical simulations in COMSOL and AIM Spice, and experimentally verified by low temperature measurements. Deviations of the measured splitting from the theoretical values and reflection measurements showed that the resonators required to be tuned in order to reach the avoided crossing. A novel tuning mechanism was devised and implemented in-situ in the experiments. Tuning of resonators was successfully achieved and there was excellent agreement of the measured splitting with the predicted values. A wide frequency tuning range of 50 MHz was obtained, more than required for our experiments, without degrading the high resonator quality factors (~10\\(^5\\)). This enabled the measurement of the inherent splitting of the coupled resonator frequencies at the avoided crossing, and more importantly, paves the way for studies of electro-mechanical interaction. In the absence of nanobars, an analogous experiment that varied the resonator inductance instead of its capacitance was devised. The resonant frequency of one of the resonators was perturbed using a small amplitude magnetic field using a coil placed underneath the sample, a case that has not been previously explored. The results obtained from these preliminary experiments have shown a good agreement with the theoretical predictions."],"dc:format":["application/pdf"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/5699/1/Gunupudi15PhD.pdf","http://etheses.bham.ac.uk//id/eprint/5699/2/Decl_IS_Gunupudi15PhD.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Physics and Astronomy"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/5699/"],"dc:subject":["QC Physics","TK Electrical engineering. Electronics Nuclear engineering"],"dcterms:accessrights":["public","staffonly"],"dc:title":["Coupled superconducting microwave resonators for studies of electro-mechanical interaction"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["d_ph"],"dc:type.qualificationname":["d_ph"]},"updated_at":"2026-11-19T09:28:31Z"}