{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:5924"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:5924","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"Development of a novel oxide-oxide ceramic matrix composite for high temperature structural applications","abstract":"The introduction of ceramic matrix composites (CMCs) for structural applications in the hot section of a gas turbine provides many potential benefits over conventional alloy materials, including facilitating elevated operating temperatures. The development of an oxide-oxide CMC composed of commercially available Nextel 720 (3M) fibres within a porous alumina matrix was presented. A simple, low cost processing method involving slurry impregnation and subsequent consolidation and densification was developed, facilitating the production of dried pre-impregnated fabric (‘pre-preg’) that can be stored in ambient conditions. Detailed investigation into the effect of three types of PVA binder, the effect of 0-20wt% additions of an alumina precursor (ACH), the influence of a bimodal particle distribution and the effect of sintering at temperatures between 1100 and 1300°C on processing and mechanical properties was completed in order to optimise the material. The optimised composite material, composed of Nextel 720 fibres within a submicron alumina particle matrix with 10wt% ACH sintered at 1200°C, exhibited mean flexural strength >205MPa, short beam shear strength >12MPa and tensile strength >146MPa. These results were comparable to similar oxide CMCs previously reported, validating this material.","abstract_html":"The introduction of ceramic matrix composites (CMCs) for structural applications in the hot section of a gas turbine provides many potential benefits over conventional alloy materials, including facilitating elevated operating temperatures. The development of an oxide-oxide CMC composed of commercially available Nextel 720 (3M) fibres within a porous alumina matrix was presented. A simple, low cost processing method involving slurry impregnation and subsequent consolidation and densification was developed, facilitating the production of dried pre-impregnated fabric (‘pre-preg’) that can be stored in ambient conditions. Detailed investigation into the effect of three types of PVA binder, the effect of 0-20wt% additions of an alumina precursor (ACH), the influence of a bimodal particle distribution and the effect of sintering at temperatures between 1100 and 1300°C on processing and mechanical properties was completed in order to optimise the material. The optimised composite material, composed of Nextel 720 fibres within a submicron alumina particle matrix with 10wt% ACH sintered at 1200°C, exhibited mean flexural strength &gt;205MPa, short beam shear strength &gt;12MPa and tensile strength &gt;146MPa. These results were comparable to similar oxide CMCs previously reported, validating this material.","abstract_has_math":false,"creators":["Dearn, Sophie Clare"],"institution":"University of Birmingham","degree_name":"d_ph","degree_level":"d_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2015,"date_issued":"2015-07","date_published":"2015-07","updated_at":"2026-11-19T09:28:38Z","subjects":["TA Engineering (General). Civil engineering (General)","TN Mining engineering. Metallurgy"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/5924/5/Dearn15PhD.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A5924","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["epsrc"]},{"key":"dc:creator","label":"Author","values":["Dearn, Sophie Clare"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2015-07-08"]},{"key":"dc:date.issued","label":"Date","values":["2015-07"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/5924/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["d_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["d_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TA Engineering (General). Civil engineering (General)","TN Mining engineering. Metallurgy"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/5924/5/Dearn15PhD.pdf","http://etheses.bham.ac.uk//id/eprint/5924/1/Decl_IS_Dearn15PhD.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["The introduction of ceramic matrix composites (CMCs) for structural applications in the hot section of a gas turbine provides many potential benefits over conventional alloy materials, including facilitating elevated operating temperatures. The development of an oxide-oxide CMC composed of commercially available Nextel 720 (3M) fibres within a porous alumina matrix was presented. A simple, low cost processing method involving slurry impregnation and subsequent consolidation and densification was developed, facilitating the production of dried pre-impregnated fabric (‘pre-preg’) that can be stored in ambient conditions. Detailed investigation into the effect of three types of PVA binder, the effect of 0-20wt% additions of an alumina precursor (ACH), the influence of a bimodal particle distribution and the effect of sintering at temperatures between 1100 and 1300°C on processing and mechanical properties was completed in order to optimise the material. The optimised composite material, composed of Nextel 720 fibres within a submicron alumina particle matrix with 10wt% ACH sintered at 1200°C, exhibited mean flexural strength >205MPa, short beam shear strength >12MPa and tensile strength >146MPa. These results were comparable to similar oxide CMCs previously reported, validating this material."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public","staffonly"]},{"key":"dc:title","label":"Title","values":["Development of a novel oxide-oxide ceramic matrix composite for high temperature structural applications"]}]}],"canonical_facts":{"dc:contributor.sponsor":["epsrc"],"dc:creator":["Dearn, Sophie Clare"],"dc:date":["2015-07-08"],"dc:date.issued":["2015-07"],"dc:description.abstract":["The introduction of ceramic matrix composites (CMCs) for structural applications in the hot section of a gas turbine provides many potential benefits over conventional alloy materials, including facilitating elevated operating temperatures. The development of an oxide-oxide CMC composed of commercially available Nextel 720 (3M) fibres within a porous alumina matrix was presented. A simple, low cost processing method involving slurry impregnation and subsequent consolidation and densification was developed, facilitating the production of dried pre-impregnated fabric (‘pre-preg’) that can be stored in ambient conditions. Detailed investigation into the effect of three types of PVA binder, the effect of 0-20wt% additions of an alumina precursor (ACH), the influence of a bimodal particle distribution and the effect of sintering at temperatures between 1100 and 1300°C on processing and mechanical properties was completed in order to optimise the material. The optimised composite material, composed of Nextel 720 fibres within a submicron alumina particle matrix with 10wt% ACH sintered at 1200°C, exhibited mean flexural strength >205MPa, short beam shear strength >12MPa and tensile strength >146MPa. These results were comparable to similar oxide CMCs previously reported, validating this material."],"dc:format":["application/pdf"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/5924/5/Dearn15PhD.pdf","http://etheses.bham.ac.uk//id/eprint/5924/1/Decl_IS_Dearn15PhD.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/5924/"],"dc:subject":["TA Engineering (General). Civil engineering (General)","TN Mining engineering. Metallurgy"],"dcterms:accessrights":["public","staffonly"],"dc:title":["Development of a novel oxide-oxide ceramic matrix composite for high temperature structural applications"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["d_ph"],"dc:type.qualificationname":["d_ph"]},"updated_at":"2026-11-19T09:28:38Z"}