{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:6028"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:6028","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"Effects of palladium thin films on the hydrogen permeability of Pd-Cu alloy membranes","abstract":"The hydrogen permeability of surface modified Pd\\(_6\\)\\(_0\\) Cu\\(_4\\)\\(_0\\) wt% (Pd\\(_4\\)\\(_7\\)\\(.\\)\\(_3\\)Cu\\(_5\\)\\(_2\\)\\(_.\\)\\(_7\\)at%) membranes have been determined for the first time. Surface modification was accomplished through the deposition of Pd thin films of three different thicknesses (95.5 ± 0.1, 797.4 ± 0.2 and 1,409.6 ± 0.2 nm) on to one side of a range of as-received Pd\\(_6\\)\\(_0\\) Cu\\(_4\\)\\(_0\\) wt% membrane coated with a 1,409.6 ± 0.2 nm thick Pd thin film positioned on the feed side (445 kPa of hydrogen pressure) and cycled between 50 and 450 °C achieved the highest hydrogen permeability of 1.09 x 10\\(^-\\)\\(^8\\) mol m\\(^-\\)\\(^1\\) s\\(^-\\)\\(^1\\) Pa\\(^-\\)\\(^0\\)\\(^.\\)\\(^5\\) at 450 °C during the third cycle. This is a 58% increase on the value measured for the as-received Pd\\(_6\\)\\(_0\\) Cu\\(_4\\)\\(_0\\) wt% under the same conditions. This improvement can be attributed to a Pd-rich Pd-Cu face centred cubic (FCC) phase forming through interdiffusion between the Pd thin film and bulk Pd-Cu membrane as a result of the test conditions used during hydrogen permeability measurements. This introduces a larger hydrogen concentration gradient across the membrane due to the relatively high hydrogen solubility of the Pd-rich Pd-Cu FCC phase resulting in the observed increase in permeability.","abstract_html":"The hydrogen permeability of surface modified Pd<span class=\"etd-inline-math\"><sub>6</sub></span><span class=\"etd-inline-math\"><sub>0</sub></span> Cu<span class=\"etd-inline-math\"><sub>4</sub></span><span class=\"etd-inline-math\"><sub>0</sub></span> wt% (Pd<span class=\"etd-inline-math\"><sub>4</sub></span><span class=\"etd-inline-math\"><sub>7</sub></span>\\(.\\)<span class=\"etd-inline-math\"><sub>3</sub></span>Cu<span class=\"etd-inline-math\"><sub>5</sub></span><span class=\"etd-inline-math\"><sub>2</sub></span><span class=\"etd-inline-math\"><sub>.</sub></span><span class=\"etd-inline-math\"><sub>7</sub></span>at%) membranes have been determined for the first time. Surface modification was accomplished through the deposition of Pd thin films of three different thicknesses (95.5 ± 0.1, 797.4 ± 0.2 and 1,409.6 ± 0.2 nm) on to one side of a range of as-received Pd<span class=\"etd-inline-math\"><sub>6</sub></span><span class=\"etd-inline-math\"><sub>0</sub></span> Cu<span class=\"etd-inline-math\"><sub>4</sub></span><span class=\"etd-inline-math\"><sub>0</sub></span> wt% membrane coated with a 1,409.6 ± 0.2 nm thick Pd thin film positioned on the feed side (445 kPa of hydrogen pressure) and cycled between 50 and 450 °C achieved the highest hydrogen permeability of 1.09 x 10<span class=\"etd-inline-math\"><sup>-</sup></span><span class=\"etd-inline-math\"><sup>8</sup></span> mol m<span class=\"etd-inline-math\"><sup>-</sup></span><span class=\"etd-inline-math\"><sup>1</sup></span> s<span class=\"etd-inline-math\"><sup>-</sup></span><span class=\"etd-inline-math\"><sup>1</sup></span> Pa<span class=\"etd-inline-math\"><sup>-</sup></span><span class=\"etd-inline-math\"><sup>0</sup></span><span class=\"etd-inline-math\"><sup>.</sup></span><span class=\"etd-inline-math\"><sup>5</sup></span> at 450 °C during the third cycle. This is a 58% increase on the value measured for the as-received Pd<span class=\"etd-inline-math\"><sub>6</sub></span><span class=\"etd-inline-math\"><sub>0</sub></span> Cu<span class=\"etd-inline-math\"><sub>4</sub></span><span class=\"etd-inline-math\"><sub>0</sub></span> wt% under the same conditions. This improvement can be attributed to a Pd-rich Pd-Cu face centred cubic (FCC) phase forming through interdiffusion between the Pd thin film and bulk Pd-Cu membrane as a result of the test conditions used during hydrogen permeability measurements. This introduces a larger hydrogen concentration gradient across the membrane due to the relatively high hydrogen solubility of the Pd-rich Pd-Cu FCC phase resulting in the observed increase in permeability.","abstract_has_math":true,"creators":["Al-Mufachi, Naser Azzat"],"institution":"University of Birmingham","degree_name":"d_ph","degree_level":"d_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2015,"date_issued":"2015-07","date_published":"2015-07","updated_at":"2026-11-19T09:28:41Z","subjects":["TP Chemical technology"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/6028/1/Al-Mufachi15PhD.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A6028","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["epsrc"]},{"key":"dc:creator","label":"Author","values":["Al-Mufachi, Naser Azzat"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2015-07"]},{"key":"dc:date.issued","label":"Date","values":["2015-07"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Chemical Engineering"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/6028/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["d_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["d_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TP Chemical technology"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/6028/1/Al-Mufachi15PhD.pdf","http://etheses.bham.ac.uk//id/eprint/6028/2/Decl_IS_Al-Mufachi15PhD.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["The hydrogen permeability of surface modified Pd\\(_6\\)\\(_0\\) Cu\\(_4\\)\\(_0\\) wt% (Pd\\(_4\\)\\(_7\\)\\(.\\)\\(_3\\)Cu\\(_5\\)\\(_2\\)\\(_.\\)\\(_7\\)at%) membranes have been determined for the first time. Surface modification was accomplished through the deposition of Pd thin films of three different thicknesses (95.5 ± 0.1, 797.4 ± 0.2 and 1,409.6 ± 0.2 nm) on to one side of a range of as-received Pd\\(_6\\)\\(_0\\) Cu\\(_4\\)\\(_0\\) wt% membrane coated with a 1,409.6 ± 0.2 nm thick Pd thin film positioned on the feed side (445 kPa of hydrogen pressure) and cycled between 50 and 450 °C achieved the highest hydrogen permeability of 1.09 x 10\\(^-\\)\\(^8\\) mol m\\(^-\\)\\(^1\\) s\\(^-\\)\\(^1\\) Pa\\(^-\\)\\(^0\\)\\(^.\\)\\(^5\\) at 450 °C during the third cycle. This is a 58% increase on the value measured for the as-received Pd\\(_6\\)\\(_0\\) Cu\\(_4\\)\\(_0\\) wt% under the same conditions. This improvement can be attributed to a Pd-rich Pd-Cu face centred cubic (FCC) phase forming through interdiffusion between the Pd thin film and bulk Pd-Cu membrane as a result of the test conditions used during hydrogen permeability measurements. This introduces a larger hydrogen concentration gradient across the membrane due to the relatively high hydrogen solubility of the Pd-rich Pd-Cu FCC phase resulting in the observed increase in permeability."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public","staffonly"]},{"key":"dc:title","label":"Title","values":["Effects of palladium thin films on the hydrogen permeability of Pd-Cu alloy membranes"]}]}],"canonical_facts":{"dc:contributor.sponsor":["epsrc"],"dc:creator":["Al-Mufachi, Naser Azzat"],"dc:date":["2015-07"],"dc:date.issued":["2015-07"],"dc:description.abstract":["The hydrogen permeability of surface modified Pd\\(_6\\)\\(_0\\) Cu\\(_4\\)\\(_0\\) wt% (Pd\\(_4\\)\\(_7\\)\\(.\\)\\(_3\\)Cu\\(_5\\)\\(_2\\)\\(_.\\)\\(_7\\)at%) membranes have been determined for the first time. Surface modification was accomplished through the deposition of Pd thin films of three different thicknesses (95.5 ± 0.1, 797.4 ± 0.2 and 1,409.6 ± 0.2 nm) on to one side of a range of as-received Pd\\(_6\\)\\(_0\\) Cu\\(_4\\)\\(_0\\) wt% membrane coated with a 1,409.6 ± 0.2 nm thick Pd thin film positioned on the feed side (445 kPa of hydrogen pressure) and cycled between 50 and 450 °C achieved the highest hydrogen permeability of 1.09 x 10\\(^-\\)\\(^8\\) mol m\\(^-\\)\\(^1\\) s\\(^-\\)\\(^1\\) Pa\\(^-\\)\\(^0\\)\\(^.\\)\\(^5\\) at 450 °C during the third cycle. This is a 58% increase on the value measured for the as-received Pd\\(_6\\)\\(_0\\) Cu\\(_4\\)\\(_0\\) wt% under the same conditions. This improvement can be attributed to a Pd-rich Pd-Cu face centred cubic (FCC) phase forming through interdiffusion between the Pd thin film and bulk Pd-Cu membrane as a result of the test conditions used during hydrogen permeability measurements. This introduces a larger hydrogen concentration gradient across the membrane due to the relatively high hydrogen solubility of the Pd-rich Pd-Cu FCC phase resulting in the observed increase in permeability."],"dc:format":["application/pdf"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/6028/1/Al-Mufachi15PhD.pdf","http://etheses.bham.ac.uk//id/eprint/6028/2/Decl_IS_Al-Mufachi15PhD.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Chemical Engineering"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/6028/"],"dc:subject":["TP Chemical technology"],"dcterms:accessrights":["public","staffonly"],"dc:title":["Effects of palladium thin films on the hydrogen permeability of Pd-Cu alloy membranes"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["d_ph"],"dc:type.qualificationname":["d_ph"]},"updated_at":"2026-11-19T09:28:41Z"}