{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:6456"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:6456","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"Clean filament winding: industrial site trials and product evaluation","abstract":"During wet-filament winding, fibre bundles are impregnated using a drum-based resin bath. The impregnated bundles are then directed to a traversing-arm prior to being over-wound onto a rotating mandrel. Once the required number of layers of the impregnated fibres has been deposited on the mandrel, the assembly is transferred to an oven to cure the thermosetting resin. After this, the composite is cooled to ambient temperature and extracted from the mandrel. There are a number of issues with the conventional manufacturing method including the generation of waste resin, utilisation of significant volumes of solvent for cleaning the equipment at the end of each shift, contamination of the factory floor due to resin drips from the impregnated tows and the cost of waste disposal. This thesis reports on the integration of a modified wet-filament winding process, which is referred to as \"clean fi lament winding\", into an industrial filament winding manufacturing operation. It was demonstrated that the clean filament can be utilised to address the above-mentioned issues associated with the conventional wet-filament winding. For example, an 88.12% and 87.5% reduction in solvent consumption and the generation of waste resin respectively was verified when compared to conventional wet-filament winding. Hence, it can be concluded that the clean filament winding technique is capable of producing industrially relevant filament wound composites with marginally superior or equivalent properties when compared to conventional wet-filament winding. However, the environmental benefits of the clean filament winding technique are significant.","abstract_html":"During wet-filament winding, fibre bundles are impregnated using a drum-based resin bath. The impregnated bundles are then directed to a traversing-arm prior to being over-wound onto a rotating mandrel. Once the required number of layers of the impregnated fibres has been deposited on the mandrel, the assembly is transferred to an oven to cure the thermosetting resin. After this, the composite is cooled to ambient temperature and extracted from the mandrel. There are a number of issues with the conventional manufacturing method including the generation of waste resin, utilisation of significant volumes of solvent for cleaning the equipment at the end of each shift, contamination of the factory floor due to resin drips from the impregnated tows and the cost of waste disposal. This thesis reports on the integration of a modified wet-filament winding process, which is referred to as &quot;clean fi lament winding&quot;, into an industrial filament winding manufacturing operation. It was demonstrated that the clean filament can be utilised to address the above-mentioned issues associated with the conventional wet-filament winding. For example, an 88.12% and 87.5% reduction in solvent consumption and the generation of waste resin respectively was verified when compared to conventional wet-filament winding. Hence, it can be concluded that the clean filament winding technique is capable of producing industrially relevant filament wound composites with marginally superior or equivalent properties when compared to conventional wet-filament winding. However, the environmental benefits of the clean filament winding technique are significant.","abstract_has_math":false,"creators":["Wait, Claire Fiona"],"institution":"University of Birmingham","degree_name":"d_ph","degree_level":"d_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2016,"date_issued":"2016-07","date_published":"2016-07","updated_at":"2026-11-19T09:28:51Z","subjects":["TN Mining engineering. Metallurgy"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/6456/1/Wait16PhD.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A6456","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["epsrc","other"]},{"key":"dc:creator","label":"Author","values":["Wait, Claire Fiona"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2016-07"]},{"key":"dc:date.issued","label":"Date","values":["2016-07"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/6456/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["d_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["d_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TN Mining engineering. Metallurgy"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/6456/1/Wait16PhD.pdf","http://etheses.bham.ac.uk//id/eprint/6456/2/Decl_IS_Wait16PhD.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["During wet-filament winding, fibre bundles are impregnated using a drum-based resin bath. The impregnated bundles are then directed to a traversing-arm prior to being over-wound onto a rotating mandrel. Once the required number of layers of the impregnated fibres has been deposited on the mandrel, the assembly is transferred to an oven to cure the thermosetting resin. After this, the composite is cooled to ambient temperature and extracted from the mandrel. There are a number of issues with the conventional manufacturing method including the generation of waste resin, utilisation of significant volumes of solvent for cleaning the equipment at the end of each shift, contamination of the factory floor due to resin drips from the impregnated tows and the cost of waste disposal. This thesis reports on the integration of a modified wet-filament winding process, which is referred to as \"clean fi lament winding\", into an industrial filament winding manufacturing operation. It was demonstrated that the clean filament can be utilised to address the above-mentioned issues associated with the conventional wet-filament winding. For example, an 88.12% and 87.5% reduction in solvent consumption and the generation of waste resin respectively was verified when compared to conventional wet-filament winding. Hence, it can be concluded that the clean filament winding technique is capable of producing industrially relevant filament wound composites with marginally superior or equivalent properties when compared to conventional wet-filament winding. However, the environmental benefits of the clean filament winding technique are significant."]},{"key":"dc:format","label":"Dc Format","values":["application/pdf"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public","staffonly"]},{"key":"dc:title","label":"Title","values":["Clean filament winding: industrial site trials and product evaluation"]}]}],"canonical_facts":{"dc:contributor.sponsor":["epsrc","other"],"dc:creator":["Wait, Claire Fiona"],"dc:date":["2016-07"],"dc:date.issued":["2016-07"],"dc:description.abstract":["During wet-filament winding, fibre bundles are impregnated using a drum-based resin bath. The impregnated bundles are then directed to a traversing-arm prior to being over-wound onto a rotating mandrel. Once the required number of layers of the impregnated fibres has been deposited on the mandrel, the assembly is transferred to an oven to cure the thermosetting resin. After this, the composite is cooled to ambient temperature and extracted from the mandrel. There are a number of issues with the conventional manufacturing method including the generation of waste resin, utilisation of significant volumes of solvent for cleaning the equipment at the end of each shift, contamination of the factory floor due to resin drips from the impregnated tows and the cost of waste disposal. This thesis reports on the integration of a modified wet-filament winding process, which is referred to as \"clean fi lament winding\", into an industrial filament winding manufacturing operation. It was demonstrated that the clean filament can be utilised to address the above-mentioned issues associated with the conventional wet-filament winding. For example, an 88.12% and 87.5% reduction in solvent consumption and the generation of waste resin respectively was verified when compared to conventional wet-filament winding. Hence, it can be concluded that the clean filament winding technique is capable of producing industrially relevant filament wound composites with marginally superior or equivalent properties when compared to conventional wet-filament winding. However, the environmental benefits of the clean filament winding technique are significant."],"dc:format":["application/pdf"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/6456/1/Wait16PhD.pdf","http://etheses.bham.ac.uk//id/eprint/6456/2/Decl_IS_Wait16PhD.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Metallurgy and Materials"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/6456/"],"dc:subject":["TN Mining engineering. Metallurgy"],"dcterms:accessrights":["public","staffonly"],"dc:title":["Clean filament winding: industrial site trials and product evaluation"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["d_ph"],"dc:type.qualificationname":["d_ph"]},"updated_at":"2026-11-19T09:28:51Z"}