{"id":{"repo_id":"birmingham","oai_identifier":"oai:etheses.bham.ac.uk:7037"},"canonical_url":"https://search.ndltd.org/etd/birmingham/oai:etheses.bham.ac.uk:7037","repository":{"repo_id":"birmingham","name":"University of Birmingham","base_url":"https://etheses.bham.ac.uk/cgi/oai2"},"display":{"title":"Experimental investigation of a premixed compression ignition engine","abstract":"Premixed compression-ignition (PCI) combustion techniques using low-cetane fuels, including Dieseline (mixture of diesel-gasoline) and naphtha, were investigated in a light-duty multi-cylinder CI-engine focusing mainly on reducing emissions while maintaining or improving the brake-thermal-efficiency. Different fuel-injection and intake/exhaust handling strategies were investigated in a wide engine operating load range from 1.4 to 17.3 bar BMEP. Moreover, an out-cylinder emission reduction technique through using a diesel-oxidation-catalyst (DOC) was investigated. Hot (uncooled) exhaust-gas-recirculation (EGR) combined with low fuel-injection-pressure (as low as 150 bar) significantly enhanced combustion-performance (COV<5%) and reduced carbon-monoxide and hydrocarbon emissions at lower loads, when using low-cetane fuelled PCI techniques. At 1.4 to 6 bar BMEP, particulate emissions were reduced by >99% with respect to the diesel-CI baseline, in terms of number and mass, while maintaining brake-specific-NOx below 0.4 g/kWh. At loads more than 6 bar BMEP, double-injection strategy advanced combustion-phasing, where the first injection-event was shown to be significantly influential. Due to narrower boiling-range of naphtha compared to Dieseline, naphtha PCI resulted in high-COV at low loads, while it resulted in rapid-combustion at medium/high loads. Utilisation of the hot-EGR is a “win-win” strategy to enhance the combustion-process of the PCI-engine and reduction of the volatile/semi-volatile compounds using the DOC.","abstract_html":"Premixed compression-ignition (PCI) combustion techniques using low-cetane fuels, including Dieseline (mixture of diesel-gasoline) and naphtha, were investigated in a light-duty multi-cylinder CI-engine focusing mainly on reducing emissions while maintaining or improving the brake-thermal-efficiency. Different fuel-injection and intake/exhaust handling strategies were investigated in a wide engine operating load range from 1.4 to 17.3 bar BMEP. Moreover, an out-cylinder emission reduction technique through using a diesel-oxidation-catalyst (DOC) was investigated. Hot (uncooled) exhaust-gas-recirculation (EGR) combined with low fuel-injection-pressure (as low as 150 bar) significantly enhanced combustion-performance (COV&lt;5%) and reduced carbon-monoxide and hydrocarbon emissions at lower loads, when using low-cetane fuelled PCI techniques. At 1.4 to 6 bar BMEP, particulate emissions were reduced by &gt;99% with respect to the diesel-CI baseline, in terms of number and mass, while maintaining brake-specific-NOx below 0.4 g/kWh. At loads more than 6 bar BMEP, double-injection strategy advanced combustion-phasing, where the first injection-event was shown to be significantly influential. Due to narrower boiling-range of naphtha compared to Dieseline, naphtha PCI resulted in high-COV at low loads, while it resulted in rapid-combustion at medium/high loads. Utilisation of the hot-EGR is a “win-win” strategy to enhance the combustion-process of the PCI-engine and reduction of the volatile/semi-volatile compounds using the DOC.","abstract_has_math":false,"creators":["Zeraati Rezaei, Soheil"],"institution":"University of Birmingham","degree_name":"d_ph","degree_level":"d_ph","degree_discipline":null,"degree_department":null,"school":null,"contributors":[],"advisors":[],"committee_chairs":[],"committee_members":[],"year":2016,"date_issued":"2016-12","date_published":"2016-12","updated_at":"2026-11-19T09:29:11Z","subjects":["TJ Mechanical engineering and machinery","TL Motor vehicles. Aeronautics. Astronautics"],"languages":["eng"],"rights":[],"rights_urls":[],"identifier_entries":[],"person_identifier_entries":[]},"links":{"outbound_url":null,"outbound_label":null,"outbound_source":null,"record_url":null,"record_label":null,"record_kind":null,"record_source":null,"download_url":"http://etheses.bham.ac.uk//id/eprint/7037/1/ZeraatiRezaei16PhD.pdf","download_label":"Download PDF","download_source":"dc:identifier.uri","access_status":null,"embargo_until":null,"access_note":null},"source_record":{"url":"https://etheses.bham.ac.uk/cgi/oai2?verb=GetRecord&metadataPrefix=uketd_dc&identifier=oai%3Aetheses.bham.ac.uk%3A7037","prefix":"uketd_dc"},"metadata_groups":[{"id":"people","label":"People","entries":[{"key":"dc:contributor.sponsor","label":"Sponsor","values":["european_commission","other"]},{"key":"dc:creator","label":"Author","values":["Zeraati Rezaei, Soheil"]}]},{"id":"academic_context","label":"Academic Context","entries":[{"key":"dc:date","label":"Dc Date","values":["2016-12"]},{"key":"dc:date.issued","label":"Date","values":["2016-12"]},{"key":"dc:publisher.department","label":"Dc Publisher Department","values":["College of Engineering & Physical Sciences","School of Engineering, Department of Mechanical Engineering"]},{"key":"dc:publisher.institution","label":"Dc Publisher Institution","values":["University of Birmingham"]},{"key":"dc:relation.isreferencedby","label":"Dc Relation Isreferencedby","values":["http://etheses.bham.ac.uk//id/eprint/7037/"]},{"key":"dc:type","label":"Dc Type","values":["Thesis"]},{"key":"dc:type.qualificationlevel","label":"Dc Type Qualificationlevel","values":["d_ph"]},{"key":"dc:type.qualificationname","label":"Dc Type Qualificationname","values":["d_ph"]}]},{"id":"subjects_keywords","label":"Subjects and Keywords","entries":[{"key":"dc:subject","label":"Dc Subject","values":["TJ Mechanical engineering and machinery","TL Motor vehicles. Aeronautics. Astronautics"]}]},{"id":"language_rights","label":"Language and Rights","entries":[{"key":"dc:language.dcterms_iso639_2","label":"Language (ISO 639-2)","values":["eng"]}]},{"id":"identifiers","label":"Identifiers","entries":[{"key":"dc:identifier.uri","label":"Identifier URI","values":["http://etheses.bham.ac.uk//id/eprint/7037/1/ZeraatiRezaei16PhD.pdf","http://etheses.bham.ac.uk//id/eprint/7037/2/Decl_IS_ZeraatiRezaei16PhD.pdf"]}]},{"id":"additional","label":"Additional Metadata","entries":[{"key":"dc:description.abstract","label":"Abstract","values":["Premixed compression-ignition (PCI) combustion techniques using low-cetane fuels, including Dieseline (mixture of diesel-gasoline) and naphtha, were investigated in a light-duty multi-cylinder CI-engine focusing mainly on reducing emissions while maintaining or improving the brake-thermal-efficiency. Different fuel-injection and intake/exhaust handling strategies were investigated in a wide engine operating load range from 1.4 to 17.3 bar BMEP. Moreover, an out-cylinder emission reduction technique through using a diesel-oxidation-catalyst (DOC) was investigated. Hot (uncooled) exhaust-gas-recirculation (EGR) combined with low fuel-injection-pressure (as low as 150 bar) significantly enhanced combustion-performance (COV<5%) and reduced carbon-monoxide and hydrocarbon emissions at lower loads, when using low-cetane fuelled PCI techniques. At 1.4 to 6 bar BMEP, particulate emissions were reduced by >99% with respect to the diesel-CI baseline, in terms of number and mass, while maintaining brake-specific-NOx below 0.4 g/kWh. At loads more than 6 bar BMEP, double-injection strategy advanced combustion-phasing, where the first injection-event was shown to be significantly influential. Due to narrower boiling-range of naphtha compared to Dieseline, naphtha PCI resulted in high-COV at low loads, while it resulted in rapid-combustion at medium/high loads. Utilisation of the hot-EGR is a “win-win” strategy to enhance the combustion-process of the PCI-engine and reduction of the volatile/semi-volatile compounds using the DOC."]},{"key":"dc:format","label":"Dc Format","values":["text"]},{"key":"dcterms:accessrights","label":"Dcterms Accessrights","values":["public","staffonly"]},{"key":"dc:title","label":"Title","values":["Experimental investigation of a premixed compression ignition engine"]}]}],"canonical_facts":{"dc:contributor.sponsor":["european_commission","other"],"dc:creator":["Zeraati Rezaei, Soheil"],"dc:date":["2016-12"],"dc:date.issued":["2016-12"],"dc:description.abstract":["Premixed compression-ignition (PCI) combustion techniques using low-cetane fuels, including Dieseline (mixture of diesel-gasoline) and naphtha, were investigated in a light-duty multi-cylinder CI-engine focusing mainly on reducing emissions while maintaining or improving the brake-thermal-efficiency. Different fuel-injection and intake/exhaust handling strategies were investigated in a wide engine operating load range from 1.4 to 17.3 bar BMEP. Moreover, an out-cylinder emission reduction technique through using a diesel-oxidation-catalyst (DOC) was investigated. Hot (uncooled) exhaust-gas-recirculation (EGR) combined with low fuel-injection-pressure (as low as 150 bar) significantly enhanced combustion-performance (COV<5%) and reduced carbon-monoxide and hydrocarbon emissions at lower loads, when using low-cetane fuelled PCI techniques. At 1.4 to 6 bar BMEP, particulate emissions were reduced by >99% with respect to the diesel-CI baseline, in terms of number and mass, while maintaining brake-specific-NOx below 0.4 g/kWh. At loads more than 6 bar BMEP, double-injection strategy advanced combustion-phasing, where the first injection-event was shown to be significantly influential. Due to narrower boiling-range of naphtha compared to Dieseline, naphtha PCI resulted in high-COV at low loads, while it resulted in rapid-combustion at medium/high loads. Utilisation of the hot-EGR is a “win-win” strategy to enhance the combustion-process of the PCI-engine and reduction of the volatile/semi-volatile compounds using the DOC."],"dc:format":["text"],"dc:identifier.uri":["http://etheses.bham.ac.uk//id/eprint/7037/1/ZeraatiRezaei16PhD.pdf","http://etheses.bham.ac.uk//id/eprint/7037/2/Decl_IS_ZeraatiRezaei16PhD.pdf"],"dc:language.dcterms_iso639_2":["eng"],"dc:publisher.department":["College of Engineering & Physical Sciences","School of Engineering, Department of Mechanical Engineering"],"dc:publisher.institution":["University of Birmingham"],"dc:relation.isreferencedby":["http://etheses.bham.ac.uk//id/eprint/7037/"],"dc:subject":["TJ Mechanical engineering and machinery","TL Motor vehicles. Aeronautics. Astronautics"],"dcterms:accessrights":["public","staffonly"],"dc:title":["Experimental investigation of a premixed compression ignition engine"],"dc:type":["Thesis"],"dc:type.qualificationlevel":["d_ph"],"dc:type.qualificationname":["d_ph"]},"updated_at":"2026-11-19T09:29:11Z"}